linux-kernel - Re: [PATCH v2] serial: exar: Fix stuck MSIs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1493035647.24567.165.camel@linux.intel.com>
Date:   Mon, 24 Apr 2017 15:07:27 +0300
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Jan Kiszka <jan.kiszka@...mens.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-serial@...r.kernel.org,
        Sudip Mukherjee <sudip.mukherjee@...ethink.co.uk>
Subject: Re: [PATCH v2] serial: exar: Fix stuck MSIs

On Mon, 2017-04-24 at 12:30 +0200, Jan Kiszka wrote:
> After migrating 8250_exar to MSI in 172c33cb61da, we can get stuck
> without further interrupts because of the special wake-up event these
> chips send. They are only cleared by reading INT0. As we fail to do so
> during startup and shutdown, we can leave the interrupt line asserted,
> which is fatal with edge-triggered MSIs.
> 
> Add the required reading of INT0 to startup and shutdown. Also account
> for the fact that a pending wake-up interrupt means we have to return
> 1
> from exar_handle_irq. Drop the unneeded reading of INT1..3 along with
> this - those never reset anything.
> 
> An alternative approach would have been disabling the wake-up
> interrupt.
> Unfortunately, this feature (REGB[17] = 1) is not available on the
> XR17D15X.

FWIW:
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>

> 
> Fixes: 172c33cb61da ("serial: exar: Enable MSI support")
> Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
> ---
> 
> Changes in v2:
>  - mention removal of INT1..3 reading in commit log [Andy]
>    (no functional changes)
> 
>  drivers/tty/serial/8250/8250_port.c | 19 ++++++++++---------
>  1 file changed, 10 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_port.c
> b/drivers/tty/serial/8250/8250_port.c
> index 6119516ef5fc..3a3667880fcf 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -47,6 +47,7 @@
>  /*
>   * These are definitions for the Exar XR17V35X and XR17(C|D)15X
>   */
> +#define UART_EXAR_INT0		0x80
>  #define UART_EXAR_SLEEP		0x8b	/* Sleep mode */
>  #define UART_EXAR_DVID		0x8d	/* Device
> identification */
>  
> @@ -1869,17 +1870,13 @@ static int
> serial8250_default_handle_irq(struct uart_port *port)
>  static int exar_handle_irq(struct uart_port *port)
>  {
>  	unsigned int iir = serial_port_in(port, UART_IIR);
> -	int ret;
> +	int ret = 0;
>  
> -	ret = serial8250_handle_irq(port, iir);
> +	if (((port->type == PORT_XR17V35X) || (port->type ==
> PORT_XR17D15X)) &&
> +	    serial_port_in(port, UART_EXAR_INT0) != 0)
> +		ret = 1;
>  
> -	if ((port->type == PORT_XR17V35X) ||
> -	   (port->type == PORT_XR17D15X)) {
> -		serial_port_in(port, 0x80);
> -		serial_port_in(port, 0x81);
> -		serial_port_in(port, 0x82);
> -		serial_port_in(port, 0x83);
> -	}
> +	ret |= serial8250_handle_irq(port, iir);
>  
>  	return ret;
>  }
> @@ -2177,6 +2174,8 @@ int serial8250_do_startup(struct uart_port
> *port)
>  	serial_port_in(port, UART_RX);
>  	serial_port_in(port, UART_IIR);
>  	serial_port_in(port, UART_MSR);
> +	if ((port->type == PORT_XR17V35X) || (port->type ==
> PORT_XR17D15X))
> +		serial_port_in(port, UART_EXAR_INT0);
>  
>  	/*
>  	 * At this point, there's no way the LSR could still be 0xff;
> @@ -2335,6 +2334,8 @@ int serial8250_do_startup(struct uart_port
> *port)
>  	serial_port_in(port, UART_RX);
>  	serial_port_in(port, UART_IIR);
>  	serial_port_in(port, UART_MSR);
> +	if ((port->type == PORT_XR17V35X) || (port->type ==
> PORT_XR17D15X))
> +		serial_port_in(port, UART_EXAR_INT0);
>  	up->lsr_saved_flags = 0;
>  	up->msr_saved_flags = 0;
>  

-- 
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Intel Finland Oy