[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c02ea9db-db90-1b2e-1baf-f2940e64201f@synopsys.com>
Date: Wed, 26 Apr 2017 09:55:49 +0100
From: Jose Abreu <Jose.Abreu@...opsys.com>
To: Vineet Gupta <Vineet.Gupta1@...opsys.com>,
"linux-snps-arc@...ts.infradead.org"
<linux-snps-arc@...ts.infradead.org>
CC: Carlos Palminha <CARLOS.PALMINHA@...opsys.com>,
Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
Rob Herring <robh+dt@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [RESEND PATCH 1/2] arc: axs10x: Add DT bindings for I2S audio
playback
Hi Vineet,
On 24-04-2017 18:36, Vineet Gupta wrote:
> On 04/21/2017 03:15 AM, Jose Abreu wrote:
>> This patch adds the necessary DT bindings to get HDMI audio
>> output in ARC AXS10x SDP. The bindings for I2S controller were
>> added as well as the bindings for simple audio card.
> Are these waiting on Rob or is it OK for me to pick these up for 4.12 ?
Yes, I was waiting for Rob ack but he has been silent. It would
be nice if these went for 4.12.
Best regards,
Jose Miguel Abreu
>
> -Vineet
>
>> Signed-off-by: Jose Abreu <joabreu@...opsys.com>
>> Acked-by: Alexey Brodkin <abrodkin@...opsys.com>
>> Cc: Carlos Palminha <palminha@...opsys.com>
>> Cc: Alexey Brodkin <abrodkin@...opsys.com>
>> Cc: Rob Herring <robh+dt@...nel.org>
>> Cc: Vineet Gupta <vgupta@...opsys.com>
>> Cc: devicetree@...r.kernel.org
>> Cc: linux-snps-arc@...ts.infradead.org
>> Cc: linux-kernel@...r.kernel.org
>> ---
>> arch/arc/boot/dts/axs10x_mb.dtsi | 22 ++++++++++++++++++----
>> 1 file changed, 18 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
>> index d6c1bbc..9d882b1 100644
>> --- a/arch/arc/boot/dts/axs10x_mb.dtsi
>> +++ b/arch/arc/boot/dts/axs10x_mb.dtsi
>> @@ -149,12 +149,13 @@
>> interrupts = <14>;
>> };
>>
>> - i2c@...e000 {
>> - compatible = "snps,designware-i2c";
>> + i2s: i2s@...00 {
>> + compatible = "snps,designware-i2s";
>> reg = <0x1e000 0x100>;
>> - clock-frequency = <400000>;
>> - clocks = <&i2cclk>;
>> + clocks = <&i2sclk 0>;
>> + clock-names = "i2sclk";
>> interrupts = <15>;
>> + #sound-dai-cells = <0>;
>> };
>>
>> i2c@...f000 {
>> @@ -174,6 +175,7 @@
>> adi,input-colorspace = "rgb";
>> adi,input-clock = "1x";
>> adi,clock-delay = <0x03>;
>> + #sound-dai-cells = <0>;
>>
>> ports {
>> #address-cells = <1>;
>> @@ -295,5 +297,17 @@
>> };
>> };
>> };
>> +
>> + sound_playback {
>> + compatible = "simple-audio-card";
>> + simple-audio-card,name = "AXS10x HDMI Audio";
>> + simple-audio-card,format = "i2s";
>> + simple-audio-card,cpu {
>> + sound-dai = <&i2s>;
>> + };
>> + simple-audio-card,codec {
>> + sound-dai = <&adv7511>;
>> + };
>> + };
>> };
>> };
Powered by blists - more mailing lists