| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAN4-oj=tmQgxeviA3yY+zeqNfjzyWrp1RUVgrrfu5=TbYZAXWw@mail.gmail.com>
Date: Tue, 25 Apr 2017 19:51:38 -0700
From: Ryan Lee <ryans.lee@...imintegrated.com>
To: Mark Brown <broonie@...nel.org>
CC: Liam Girdwood <lgirdwood@...il.com>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <perex@...ex.cz>, <tiwai@...e.com>,
Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>,
Arnd Bergmann <arnd@...db.de>,
<ckeepax@...nsource.wolfsonmicro.com>, <lars@...afoo.de>,
<bardliao@...ltek.com>, <nh6z@...z.net>, <KCHSU0@...oton.com>,
Axel Lin <axel.lin@...ics.com>, <romain.perier@...labora.com>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
<oder_chiou@...ltek.com>, <Paul.Handrigan@...rus.com>,
<alsa-devel@...a-project.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Dylan Reid <dgreid@...gle.com>,
Ryan Lee <ryan.lee.maxim@...il.com>
Subject: Re: Applied "ASoC: Add support for Maxim Integrated MAX98927
Amplifier" to the asoc tree
On Tue, Apr 25, 2017 at 9:51 AM, Ryan Lee <ryans.lee@...imintegrated.com> wrote:
> '
>
> On Thu, Apr 6, 2017 at 11:55 AM, Mark Brown <broonie@...nel.org> wrote:
>> The patch
>>
>> ASoC: Add support for Maxim Integrated MAX98927 Amplifier
>>
>> has been applied to the asoc tree at
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
>>
>> All being well this means that it will be integrated into the linux-next
>> tree (usually sometime in the next 24 hours) and sent to Linus during
>> the next merge window (or sooner if it is a bug fix), however if
>> problems are discovered then the patch may be dropped or reverted.
>>
>> You may get further e-mails resulting from automated or manual testing
>> and review of the tree, please engage with people reporting problems and
>> send followup patches addressing any issues that are reported if needed.
>>
>> If any updates are required or you are submitting further changes they
>> should be sent as incremental updates against current git, existing
>> patches will not be replaced.
>>
>> Please add any relevant lists and maintainers to the CCs when replying
>> to this mail.
>>
>> Thanks,
>> Mark
>
> I have tried to check MAX98927 driver on linux-next tree and
> 'git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git' but
> have failed.
> So I wanted to check the current status of MAX98927 driver.
> I'm sorry for top-posting.
Please ignore this mail.
I just checked it is on linux-next tree.
I'm sorry again to make people confused.
>
>>
>> From 7c0c2000716e64151b3c0c62026c18f31537ebe9 Mon Sep 17 00:00:00 2001
>> From: Ryan Lee <ryans.lee@...imintegrated.com>
>> Date: Tue, 4 Apr 2017 02:23:08 +0900
>> Subject: [PATCH] ASoC: Add support for Maxim Integrated MAX98927 Amplifier
>>
>> Signed-off-by: Ryan Lee <ryans.lee@...imintegrated.com>
>> Signed-off-by: Mark Brown <broonie@...nel.org>
>> ---
>> .../devicetree/bindings/sound/max98925.txt | 22 -
>> .../devicetree/bindings/sound/max98926.txt | 32 -
>> .../devicetree/bindings/sound/max9892x.txt | 41 +
>> sound/soc/codecs/Kconfig | 5 +
>> sound/soc/codecs/Makefile | 2 +
>> sound/soc/codecs/max98927.c | 841 +++++++++++++++++++++
>> sound/soc/codecs/max98927.h | 272 +++++++
>> 7 files changed, 1161 insertions(+), 54 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/sound/max98925.txt
>> delete mode 100644 Documentation/devicetree/bindings/sound/max98926.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/max9892x.txt
>> create mode 100644 sound/soc/codecs/max98927.c
>> create mode 100644 sound/soc/codecs/max98927.h
>>
>> diff --git a/Documentation/devicetree/bindings/sound/max98925.txt b/Documentation/devicetree/bindings/sound/max98925.txt
>> deleted file mode 100644
>> index 27be63e2aa0d..000000000000
>> --- a/Documentation/devicetree/bindings/sound/max98925.txt
>> +++ /dev/null
>> @@ -1,22 +0,0 @@
>> -max98925 audio CODEC
>> -
>> -This device supports I2C.
>> -
>> -Required properties:
>> -
>> - - compatible : "maxim,max98925"
>> -
>> - - vmon-slot-no : slot number used to send voltage information
>> -
>> - - imon-slot-no : slot number used to send current information
>> -
>> - - reg : the I2C address of the device for I2C
>> -
>> -Example:
>> -
>> -codec: max98925@1a {
>> - compatible = "maxim,max98925";
>> - vmon-slot-no = <0>;
>> - imon-slot-no = <2>;
>> - reg = <0x1a>;
>> -};
>> diff --git a/Documentation/devicetree/bindings/sound/max98926.txt b/Documentation/devicetree/bindings/sound/max98926.txt
>> deleted file mode 100644
>> index 0b7f4e4d5f9a..000000000000
>> --- a/Documentation/devicetree/bindings/sound/max98926.txt
>> +++ /dev/null
>> @@ -1,32 +0,0 @@
>> -max98926 audio CODEC
>> -
>> -This device supports I2C.
>> -
>> -Required properties:
>> -
>> - - compatible : "maxim,max98926"
>> -
>> - - vmon-slot-no : slot number used to send voltage information
>> - or in inteleave mode this will be used as
>> - interleave slot.
>> -
>> - - imon-slot-no : slot number used to send current information
>> -
>> - - interleave-mode : When using two MAX98926 in a system it is
>> - possible to create ADC data that that will
>> - overflow the frame size. Digital Audio Interleave
>> - mode provides a means to output VMON and IMON data
>> - from two devices on a single DOUT line when running
>> - smaller frames sizes such as 32 BCLKS per LRCLK or
>> - 48 BCLKS per LRCLK.
>> -
>> - - reg : the I2C address of the device for I2C
>> -
>> -Example:
>> -
>> -codec: max98926@1a {
>> - compatible = "maxim,max98926";
>> - vmon-slot-no = <0>;
>> - imon-slot-no = <2>;
>> - reg = <0x1a>;
>> -};
>> diff --git a/Documentation/devicetree/bindings/sound/max9892x.txt b/Documentation/devicetree/bindings/sound/max9892x.txt
>> new file mode 100644
>> index 000000000000..f6171591ddc6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/max9892x.txt
>> @@ -0,0 +1,41 @@
>> +Maxim Integrated MAX98925/MAX98926/MAX98927 Speaker Amplifier
>> +
>> +This device supports I2C.
>> +
>> +Required properties:
>> +
>> + - compatible : should be one of the following
>> + - "maxim,max98925"
>> + - "maxim,max98926"
>> + - "maxim,max98927"
>> +
>> + - vmon-slot-no : slot number used to send voltage information
>> + or in inteleave mode this will be used as
>> + interleave slot.
>> + MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0
>> + MAX98927 slot range : 0 ~ 15, Default : 0
>> +
>> + - imon-slot-no : slot number used to send current information
>> + MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0
>> + MAX98927 slot range : 0 ~ 15, Default : 0
>> +
>> + - interleave-mode : When using two MAX9892X in a system it is
>> + possible to create ADC data that that will
>> + overflow the frame size. Digital Audio Interleave
>> + mode provides a means to output VMON and IMON data
>> + from two devices on a single DOUT line when running
>> + smaller frames sizes such as 32 BCLKS per LRCLK or
>> + 48 BCLKS per LRCLK.
>> + Range : 0 (off), 1 (on), Default : 0
>> +
>> + - reg : the I2C address of the device for I2C
>> +
>> +Example:
>> +
>> +codec: max98927@3a {
>> + compatible = "maxim,max98927";
>> + vmon-slot-no = <0>;
>> + imon-slot-no = <1>;
>> + interleave-mode = <0>;
>> + reg = <0x3a>;
>> +};
>> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
>> index 9e1718a8cb1c..65e31ab88280 100644
>> --- a/sound/soc/codecs/Kconfig
>> +++ b/sound/soc/codecs/Kconfig
>> @@ -89,6 +89,7 @@ config SND_SOC_ALL_CODECS
>> select SND_SOC_MAX9867 if I2C
>> select SND_SOC_MAX98925 if I2C
>> select SND_SOC_MAX98926 if I2C
>> + select SND_SOC_MAX98927 if I2C
>> select SND_SOC_MAX9850 if I2C
>> select SND_SOC_MAX9860 if I2C
>> select SND_SOC_MAX9768 if I2C
>> @@ -585,6 +586,10 @@ config SND_SOC_MAX98925
>> config SND_SOC_MAX98926
>> tristate
>>
>> +config SND_SOC_MAX98927
>> + tristate "Maxim Integrated MAX98927 Speaker Amplifier"
>> + depends on I2C
>> +
>> config SND_SOC_MAX9850
>> tristate
>>
>> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
>> index 7e1dad79610b..64656c43200c 100644
>> --- a/sound/soc/codecs/Makefile
>> +++ b/sound/soc/codecs/Makefile
>> @@ -84,6 +84,7 @@ snd-soc-max98371-objs := max98371.o
>> snd-soc-max9867-objs := max9867.o
>> snd-soc-max98925-objs := max98925.o
>> snd-soc-max98926-objs := max98926.o
>> +snd-soc-max98927-objs := max98927.o
>> snd-soc-max9850-objs := max9850.o
>> snd-soc-max9860-objs := max9860.o
>> snd-soc-mc13783-objs := mc13783.o
>> @@ -312,6 +313,7 @@ obj-$(CONFIG_SND_SOC_MAX98357A) += snd-soc-max98357a.o
>> obj-$(CONFIG_SND_SOC_MAX9867) += snd-soc-max9867.o
>> obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o
>> obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o
>> +obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o
>> obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
>> obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o
>> obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o
>> diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c
>> new file mode 100644
>> index 000000000000..b5ee29499e16
>> --- /dev/null
>> +++ b/sound/soc/codecs/max98927.c
>> @@ -0,0 +1,841 @@
>> +/*
>> + * max98927.c -- MAX98927 ALSA Soc Audio driver
>> + *
>> + * Copyright (C) 2016 Maxim Integrated Products
>> + * Author: Ryan Lee <ryans.lee@...imintegrated.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +#include <linux/acpi.h>
>> +#include <linux/i2c.h>
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +#include <linux/slab.h>
>> +#include <linux/cdev.h>
>> +#include <sound/pcm.h>
>> +#include <sound/pcm_params.h>
>> +#include <sound/soc.h>
>> +#include <linux/gpio.h>
>> +#include <linux/of_gpio.h>
>> +#include <sound/tlv.h>
>> +#include "max98927.h"
>> +
>> +static struct reg_default max98927_reg[] = {
>> + {MAX98927_R0001_INT_RAW1, 0x00},
>> + {MAX98927_R0002_INT_RAW2, 0x00},
>> + {MAX98927_R0003_INT_RAW3, 0x00},
>> + {MAX98927_R0004_INT_STATE1, 0x00},
>> + {MAX98927_R0005_INT_STATE2, 0x00},
>> + {MAX98927_R0006_INT_STATE3, 0x00},
>> + {MAX98927_R0007_INT_FLAG1, 0x00},
>> + {MAX98927_R0008_INT_FLAG2, 0x00},
>> + {MAX98927_R0009_INT_FLAG3, 0x00},
>> + {MAX98927_R000A_INT_EN1, 0x00},
>> + {MAX98927_R000B_INT_EN2, 0x00},
>> + {MAX98927_R000C_INT_EN3, 0x00},
>> + {MAX98927_R000D_INT_FLAG_CLR1, 0x00},
>> + {MAX98927_R000E_INT_FLAG_CLR2, 0x00},
>> + {MAX98927_R000F_INT_FLAG_CLR3, 0x00},
>> + {MAX98927_R0010_IRQ_CTRL, 0x00},
>> + {MAX98927_R0011_CLK_MON, 0x00},
>> + {MAX98927_R0012_WDOG_CTRL, 0x00},
>> + {MAX98927_R0013_WDOG_RST, 0x00},
>> + {MAX98927_R0014_MEAS_ADC_THERM_WARN_THRESH, 0x00},
>> + {MAX98927_R0015_MEAS_ADC_THERM_SHDN_THRESH, 0x00},
>> + {MAX98927_R0016_MEAS_ADC_THERM_HYSTERESIS, 0x00},
>> + {MAX98927_R0017_PIN_CFG, 0x55},
>> + {MAX98927_R0018_PCM_RX_EN_A, 0x00},
>> + {MAX98927_R0019_PCM_RX_EN_B, 0x00},
>> + {MAX98927_R001A_PCM_TX_EN_A, 0x00},
>> + {MAX98927_R001B_PCM_TX_EN_B, 0x00},
>> + {MAX98927_R001C_PCM_TX_HIZ_CTRL_A, 0x00},
>> + {MAX98927_R001D_PCM_TX_HIZ_CTRL_B, 0x00},
>> + {MAX98927_R001E_PCM_TX_CH_SRC_A, 0x00},
>> + {MAX98927_R001F_PCM_TX_CH_SRC_B, 0x00},
>> + {MAX98927_R0020_PCM_MODE_CFG, 0x40},
>> + {MAX98927_R0021_PCM_MASTER_MODE, 0x00},
>> + {MAX98927_R0022_PCM_CLK_SETUP, 0x22},
>> + {MAX98927_R0023_PCM_SR_SETUP1, 0x00},
>> + {MAX98927_R0024_PCM_SR_SETUP2, 0x00},
>> + {MAX98927_R0025_PCM_TO_SPK_MONOMIX_A, 0x00},
>> + {MAX98927_R0026_PCM_TO_SPK_MONOMIX_B, 0x00},
>> + {MAX98927_R0027_ICC_RX_EN_A, 0x00},
>> + {MAX98927_R0028_ICC_RX_EN_B, 0x00},
>> + {MAX98927_R002B_ICC_TX_EN_A, 0x00},
>> + {MAX98927_R002C_ICC_TX_EN_B, 0x00},
>> + {MAX98927_R002E_ICC_HIZ_MANUAL_MODE, 0x00},
>> + {MAX98927_R002F_ICC_TX_HIZ_EN_A, 0x00},
>> + {MAX98927_R0030_ICC_TX_HIZ_EN_B, 0x00},
>> + {MAX98927_R0031_ICC_LNK_EN, 0x00},
>> + {MAX98927_R0032_PDM_TX_EN, 0x00},
>> + {MAX98927_R0033_PDM_TX_HIZ_CTRL, 0x00},
>> + {MAX98927_R0034_PDM_TX_CTRL, 0x00},
>> + {MAX98927_R0035_PDM_RX_CTRL, 0x00},
>> + {MAX98927_R0036_AMP_VOL_CTRL, 0x00},
>> + {MAX98927_R0037_AMP_DSP_CFG, 0x02},
>> + {MAX98927_R0038_TONE_GEN_DC_CFG, 0x00},
>> + {MAX98927_R0039_DRE_CTRL, 0x01},
>> + {MAX98927_R003A_AMP_EN, 0x00},
>> + {MAX98927_R003B_SPK_SRC_SEL, 0x00},
>> + {MAX98927_R003C_SPK_GAIN, 0x00},
>> + {MAX98927_R003D_SSM_CFG, 0x01},
>> + {MAX98927_R003E_MEAS_EN, 0x00},
>> + {MAX98927_R003F_MEAS_DSP_CFG, 0x04},
>> + {MAX98927_R0040_BOOST_CTRL0, 0x00},
>> + {MAX98927_R0041_BOOST_CTRL3, 0x00},
>> + {MAX98927_R0042_BOOST_CTRL1, 0x00},
>> + {MAX98927_R0043_MEAS_ADC_CFG, 0x00},
>> + {MAX98927_R0044_MEAS_ADC_BASE_MSB, 0x00},
>> + {MAX98927_R0045_MEAS_ADC_BASE_LSB, 0x00},
>> + {MAX98927_R0046_ADC_CH0_DIVIDE, 0x00},
>> + {MAX98927_R0047_ADC_CH1_DIVIDE, 0x00},
>> + {MAX98927_R0048_ADC_CH2_DIVIDE, 0x00},
>> + {MAX98927_R0049_ADC_CH0_FILT_CFG, 0x00},
>> + {MAX98927_R004A_ADC_CH1_FILT_CFG, 0x00},
>> + {MAX98927_R004B_ADC_CH2_FILT_CFG, 0x00},
>> + {MAX98927_R004C_MEAS_ADC_CH0_READ, 0x00},
>> + {MAX98927_R004D_MEAS_ADC_CH1_READ, 0x00},
>> + {MAX98927_R004E_MEAS_ADC_CH2_READ, 0x00},
>> + {MAX98927_R0051_BROWNOUT_STATUS, 0x00},
>> + {MAX98927_R0052_BROWNOUT_EN, 0x00},
>> + {MAX98927_R0053_BROWNOUT_INFINITE_HOLD, 0x00},
>> + {MAX98927_R0054_BROWNOUT_INFINITE_HOLD_CLR, 0x00},
>> + {MAX98927_R0055_BROWNOUT_LVL_HOLD, 0x00},
>> + {MAX98927_R005A_BROWNOUT_LVL1_THRESH, 0x00},
>> + {MAX98927_R005B_BROWNOUT_LVL2_THRESH, 0x00},
>> + {MAX98927_R005C_BROWNOUT_LVL3_THRESH, 0x00},
>> + {MAX98927_R005D_BROWNOUT_LVL4_THRESH, 0x00},
>> + {MAX98927_R005E_BROWNOUT_THRESH_HYSTERYSIS, 0x00},
>> + {MAX98927_R005F_BROWNOUT_AMP_LIMITER_ATK_REL, 0x00},
>> + {MAX98927_R0060_BROWNOUT_AMP_GAIN_ATK_REL, 0x00},
>> + {MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE, 0x00},
>> + {MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT, 0x00},
>> + {MAX98927_R0073_BROWNOUT_LVL1_AMP1_CTRL1, 0x00},
>> + {MAX98927_R0074_BROWNOUT_LVL1_AMP1_CTRL2, 0x00},
>> + {MAX98927_R0075_BROWNOUT_LVL1_AMP1_CTRL3, 0x00},
>> + {MAX98927_R0076_BROWNOUT_LVL2_CUR_LIMIT, 0x00},
>> + {MAX98927_R0077_BROWNOUT_LVL2_AMP1_CTRL1, 0x00},
>> + {MAX98927_R0078_BROWNOUT_LVL2_AMP1_CTRL2, 0x00},
>> + {MAX98927_R0079_BROWNOUT_LVL2_AMP1_CTRL3, 0x00},
>> + {MAX98927_R007A_BROWNOUT_LVL3_CUR_LIMIT, 0x00},
>> + {MAX98927_R007B_BROWNOUT_LVL3_AMP1_CTRL1, 0x00},
>> + {MAX98927_R007C_BROWNOUT_LVL3_AMP1_CTRL2, 0x00},
>> + {MAX98927_R007D_BROWNOUT_LVL3_AMP1_CTRL3, 0x00},
>> + {MAX98927_R007E_BROWNOUT_LVL4_CUR_LIMIT, 0x00},
>> + {MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1, 0x00},
>> + {MAX98927_R0080_BROWNOUT_LVL4_AMP1_CTRL2, 0x00},
>> + {MAX98927_R0081_BROWNOUT_LVL4_AMP1_CTRL3, 0x00},
>> + {MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM, 0x00},
>> + {MAX98927_R0083_ENV_TRACK_BOOST_VOUT_DELAY, 0x00},
>> + {MAX98927_R0084_ENV_TRACK_REL_RATE, 0x00},
>> + {MAX98927_R0085_ENV_TRACK_HOLD_RATE, 0x00},
>> + {MAX98927_R0086_ENV_TRACK_CTRL, 0x00},
>> + {MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ, 0x00},
>> + {MAX98927_R00FF_GLOBAL_SHDN, 0x00},
>> + {MAX98927_R0100_SOFT_RESET, 0x00},
>> + {MAX98927_R01FF_REV_ID, 0x40},
>> +};
>> +
>> +static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
>> +{
>> + struct snd_soc_codec *codec = codec_dai->codec;
>> + struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
>> + unsigned int mode = 0;
>> + unsigned int format = 0;
>> + unsigned int invert = 0;
>> +
>> + dev_dbg(codec->dev, "%s: fmt 0x%08X\n", __func__, fmt);
>> +
>> + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
>> + case SND_SOC_DAIFMT_CBS_CFS:
>> + mode = MAX98927_PCM_MASTER_MODE_SLAVE;
>> + break;
>> + case SND_SOC_DAIFMT_CBM_CFM:
>> + max98927->master = true;
>> + mode = MAX98927_PCM_MASTER_MODE_MASTER;
>> + break;
>> + default:
>> + dev_err(codec->dev, "DAI clock mode unsupported");
>> + return -EINVAL;
>> + }
>> +
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0021_PCM_MASTER_MODE,
>> + MAX98927_PCM_MASTER_MODE_MASK,
>> + mode);
>> +
>> + switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>> + case SND_SOC_DAIFMT_NB_NF:
>> + break;
>> + case SND_SOC_DAIFMT_IB_NF:
>> + invert = MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE;
>> + break;
>> + default:
>> + dev_err(codec->dev, "DAI invert mode unsupported");
>> + return -EINVAL;
>> + }
>> +
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0020_PCM_MODE_CFG,
>> + MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE,
>> + invert);
>> +
>> + /* interface format */
>> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>> + case SND_SOC_DAIFMT_I2S:
>> + max98927->iface |= SND_SOC_DAIFMT_I2S;
>> + format = MAX98927_PCM_FORMAT_I2S;
>> + break;
>> + case SND_SOC_DAIFMT_LEFT_J:
>> + max98927->iface |= SND_SOC_DAIFMT_LEFT_J;
>> + format = MAX98927_PCM_FORMAT_LJ;
>> + break;
>> + case SND_SOC_DAIFMT_PDM:
>> + max98927->iface |= SND_SOC_DAIFMT_PDM;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + /* pcm channel configuration */
>> + if (max98927->iface & (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_LEFT_J)) {
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0018_PCM_RX_EN_A,
>> + MAX98927_PCM_RX_CH0_EN | MAX98927_PCM_RX_CH1_EN,
>> + MAX98927_PCM_RX_CH0_EN | MAX98927_PCM_RX_CH1_EN);
>> +
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0020_PCM_MODE_CFG,
>> + MAX98927_PCM_MODE_CFG_FORMAT_MASK,
>> + format << MAX98927_PCM_MODE_CFG_FORMAT_SHIFT);
>> +
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R003B_SPK_SRC_SEL,
>> + MAX98927_SPK_SRC_MASK, 0);
>> +
>> + } else
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0018_PCM_RX_EN_A,
>> + MAX98927_PCM_RX_CH0_EN | MAX98927_PCM_RX_CH1_EN, 0);
>> +
>> + /* pdm channel configuration */
>> + if (max98927->iface & SND_SOC_DAIFMT_PDM) {
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0035_PDM_RX_CTRL,
>> + MAX98927_PDM_RX_EN_MASK, 1);
>> +
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R003B_SPK_SRC_SEL,
>> + MAX98927_SPK_SRC_MASK, 3);
>> + } else
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0035_PDM_RX_CTRL,
>> + MAX98927_PDM_RX_EN_MASK, 0);
>> + return 0;
>> +}
>> +
>> +/* codec MCLK rate in master mode */
>> +static const int rate_table[] = {
>> + 5644800, 6000000, 6144000, 6500000,
>> + 9600000, 11289600, 12000000, 12288000,
>> + 13000000, 19200000,
>> +};
>> +
>> +static int max98927_set_clock(struct max98927_priv *max98927,
>> + struct snd_pcm_hw_params *params)
>> +{
>> + struct snd_soc_codec *codec = max98927->codec;
>> + /* BCLK/LRCLK ratio calculation */
>> + int blr_clk_ratio = params_channels(params) * max98927->ch_size;
>> + int value;
>> +
>> + if (max98927->master) {
>> + int i;
>> + /* match rate to closest value */
>> + for (i = 0; i < ARRAY_SIZE(rate_table); i++) {
>> + if (rate_table[i] >= max98927->sysclk)
>> + break;
>> + }
>> + if (i == ARRAY_SIZE(rate_table)) {
>> + dev_err(codec->dev, "failed to find proper clock rate.\n");
>> + return -EINVAL;
>> + }
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0021_PCM_MASTER_MODE,
>> + MAX98927_PCM_MASTER_MODE_MCLK_MASK,
>> + i << MAX98927_PCM_MASTER_MODE_MCLK_RATE_SHIFT);
>> + }
>> +
>> + switch (blr_clk_ratio) {
>> + case 32:
>> + value = 2;
>> + break;
>> + case 48:
>> + value = 3;
>> + break;
>> + case 64:
>> + value = 4;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0022_PCM_CLK_SETUP,
>> + MAX98927_PCM_CLK_SETUP_BSEL_MASK,
>> + value);
>> + return 0;
>> +}
>> +
>> +static int max98927_dai_hw_params(struct snd_pcm_substream *substream,
>> + struct snd_pcm_hw_params *params,
>> + struct snd_soc_dai *dai)
>> +{
>> + struct snd_soc_codec *codec = dai->codec;
>> + struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
>> + unsigned int sampling_rate = 0;
>> + unsigned int chan_sz = 0;
>> +
>> + /* pcm mode configuration */
>> + switch (snd_pcm_format_width(params_format(params))) {
>> + case 16:
>> + chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_16;
>> + break;
>> + case 24:
>> + chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_24;
>> + break;
>> + case 32:
>> + chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_32;
>> + break;
>> + default:
>> + dev_err(codec->dev, "format unsupported %d",
>> + params_format(params));
>> + goto err;
>> + }
>> +
>> + max98927->ch_size = snd_pcm_format_width(params_format(params));
>> +
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0020_PCM_MODE_CFG,
>> + MAX98927_PCM_MODE_CFG_CHANSZ_MASK, chan_sz);
>> +
>> + dev_dbg(codec->dev, "format supported %d",
>> + params_format(params));
>> +
>> + /* sampling rate configuration */
>> + switch (params_rate(params)) {
>> + case 8000:
>> + sampling_rate = MAX98927_PCM_SR_SET1_SR_8000;
>> + break;
>> + case 11025:
>> + sampling_rate = MAX98927_PCM_SR_SET1_SR_11025;
>> + break;
>> + case 12000:
>> + sampling_rate = MAX98927_PCM_SR_SET1_SR_12000;
>> + break;
>> + case 16000:
>> + sampling_rate = MAX98927_PCM_SR_SET1_SR_16000;
>> + break;
>> + case 22050:
>> + sampling_rate = MAX98927_PCM_SR_SET1_SR_22050;
>> + break;
>> + case 24000:
>> + sampling_rate = MAX98927_PCM_SR_SET1_SR_24000;
>> + break;
>> + case 32000:
>> + sampling_rate = MAX98927_PCM_SR_SET1_SR_32000;
>> + break;
>> + case 44100:
>> + sampling_rate = MAX98927_PCM_SR_SET1_SR_44100;
>> + break;
>> + case 48000:
>> + sampling_rate = MAX98927_PCM_SR_SET1_SR_48000;
>> + break;
>> + default:
>> + dev_err(codec->dev, "rate %d not supported\n",
>> + params_rate(params));
>> + goto err;
>> + }
>> + /* set DAI_SR to correct LRCLK frequency */
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0023_PCM_SR_SETUP1,
>> + MAX98927_PCM_SR_SET1_SR_MASK,
>> + sampling_rate);
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0024_PCM_SR_SETUP2,
>> + MAX98927_PCM_SR_SET2_SR_MASK,
>> + sampling_rate << MAX98927_PCM_SR_SET2_SR_SHIFT);
>> +
>> + /* set sampling rate of IV */
>> + if (max98927->interleave_mode &&
>> + sampling_rate > MAX98927_PCM_SR_SET1_SR_16000)
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0024_PCM_SR_SETUP2,
>> + MAX98927_PCM_SR_SET2_IVADC_SR_MASK,
>> + sampling_rate - 3);
>> + else
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R0024_PCM_SR_SETUP2,
>> + MAX98927_PCM_SR_SET2_IVADC_SR_MASK,
>> + sampling_rate);
>> + return max98927_set_clock(max98927, params);
>> +err:
>> + return -EINVAL;
>> +}
>> +
>> +#define MAX98927_RATES SNDRV_PCM_RATE_8000_48000
>> +
>> +#define MAX98927_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
>> + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
>> +
>> +static int max98927_dai_set_sysclk(struct snd_soc_dai *dai,
>> + int clk_id, unsigned int freq, int dir)
>> +{
>> + struct snd_soc_codec *codec = dai->codec;
>> + struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
>> +
>> + max98927->sysclk = freq;
>> + return 0;
>> +}
>> +
>> +static const struct snd_soc_dai_ops max98927_dai_ops = {
>> + .set_sysclk = max98927_dai_set_sysclk,
>> + .set_fmt = max98927_dai_set_fmt,
>> + .hw_params = max98927_dai_hw_params,
>> +};
>> +
>> +static int max98927_dac_event(struct snd_soc_dapm_widget *w,
>> + struct snd_kcontrol *kcontrol, int event)
>> +{
>> + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
>> + struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
>> +
>> + switch (event) {
>> + case SND_SOC_DAPM_POST_PMU:
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R003A_AMP_EN,
>> + MAX98927_AMP_EN_MASK, 1);
>> + /* enable VMON and IMON */
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R003E_MEAS_EN,
>> + MAX98927_MEAS_V_EN | MAX98927_MEAS_I_EN,
>> + MAX98927_MEAS_V_EN | MAX98927_MEAS_I_EN);
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R00FF_GLOBAL_SHDN,
>> + MAX98927_GLOBAL_EN_MASK, 1);
>> + break;
>> + case SND_SOC_DAPM_POST_PMD:
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R00FF_GLOBAL_SHDN,
>> + MAX98927_GLOBAL_EN_MASK, 0);
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R003A_AMP_EN,
>> + MAX98927_AMP_EN_MASK, 0);
>> + /* disable VMON and IMON */
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R003E_MEAS_EN,
>> + MAX98927_MEAS_V_EN | MAX98927_MEAS_I_EN, 0);
>> + break;
>> + default:
>> + return 0;
>> + }
>> + return 0;
>> +}
>> +
>> +static const char * const max98927_switch_text[] = {
>> + "Left", "Right", "LeftRight"};
>> +
>> +static const struct soc_enum dai_sel_enum =
>> + SOC_ENUM_SINGLE(MAX98927_R0025_PCM_TO_SPK_MONOMIX_A,
>> + MAX98927_PCM_TO_SPK_MONOMIX_CFG_SHIFT,
>> + 3, max98927_switch_text);
>> +
>> +static const struct snd_kcontrol_new max98927_dai_controls =
>> + SOC_DAPM_ENUM("DAI Sel", dai_sel_enum);
>> +
>> +static const struct snd_soc_dapm_widget max98927_dapm_widgets[] = {
>> + SND_SOC_DAPM_AIF_IN("DAI_OUT", "HiFi Playback", 0, SND_SOC_NOPM, 0, 0),
>> + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", MAX98927_R003A_AMP_EN,
>> + 0, 0, max98927_dac_event,
>> + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
>> + SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0,
>> + &max98927_dai_controls),
>> + SND_SOC_DAPM_OUTPUT("BE_OUT"),
>> +};
>> +
>> +static DECLARE_TLV_DB_SCALE(max98927_spk_tlv, 300, 300, 0);
>> +static DECLARE_TLV_DB_SCALE(max98927_digital_tlv, -1600, 25, 0);
>> +
>> +static bool max98927_readable_register(struct device *dev, unsigned int reg)
>> +{
>> + switch (reg) {
>> + case MAX98927_R0001_INT_RAW1 ... MAX98927_R0028_ICC_RX_EN_B:
>> + case MAX98927_R002B_ICC_TX_EN_A ... MAX98927_R002C_ICC_TX_EN_B:
>> + case MAX98927_R002E_ICC_HIZ_MANUAL_MODE
>> + ... MAX98927_R004E_MEAS_ADC_CH2_READ:
>> + case MAX98927_R0051_BROWNOUT_STATUS
>> + ... MAX98927_R0055_BROWNOUT_LVL_HOLD:
>> + case MAX98927_R005A_BROWNOUT_LVL1_THRESH
>> + ... MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE:
>> + case MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT
>> + ... MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ:
>> + case MAX98927_R00FF_GLOBAL_SHDN:
>> + case MAX98927_R0100_SOFT_RESET:
>> + case MAX98927_R01FF_REV_ID:
>> + return true;
>> + default:
>> + return false;
>> + }
>> +};
>> +
>> +static bool max98927_volatile_reg(struct device *dev, unsigned int reg)
>> +{
>> + switch (reg) {
>> + case MAX98927_R0001_INT_RAW1 ... MAX98927_R0009_INT_FLAG3:
>> + return true;
>> + default:
>> + return false;
>> + }
>> +}
>> +
>> +static const char * const max98927_boost_voltage_text[] = {
>> + "6.5V", "6.625V", "6.75V", "6.875V", "7V", "7.125V", "7.25V", "7.375V",
>> + "7.5V", "7.625V", "7.75V", "7.875V", "8V", "8.125V", "8.25V", "8.375V",
>> + "8.5V", "8.625V", "8.75V", "8.875V", "9V", "9.125V", "9.25V", "9.375V",
>> + "9.5V", "9.625V", "9.75V", "9.875V", "10V"
>> +};
>> +
>> +static SOC_ENUM_SINGLE_DECL(max98927_boost_voltage,
>> + MAX98927_R0040_BOOST_CTRL0, 0,
>> + max98927_boost_voltage_text);
>> +
>> +static const char * const max98927_current_limit_text[] = {
>> + "1.00A", "1.10A", "1.20A", "1.30A", "1.40A", "1.50A", "1.60A", "1.70A",
>> + "1.80A", "1.90A", "2.00A", "2.10A", "2.20A", "2.30A", "2.40A", "2.50A",
>> + "2.60A", "2.70A", "2.80A", "2.90A", "3.00A", "3.10A", "3.20A", "3.30A",
>> + "3.40A", "3.50A", "3.60A", "3.70A", "3.80A", "3.90A", "4.00A", "4.10A"
>> +};
>> +
>> +static SOC_ENUM_SINGLE_DECL(max98927_current_limit,
>> + MAX98927_R0042_BOOST_CTRL1, 1,
>> + max98927_current_limit_text);
>> +
>> +static const struct snd_kcontrol_new max98927_snd_controls[] = {
>> + SOC_SINGLE_TLV("Speaker Volume", MAX98927_R003C_SPK_GAIN,
>> + 0, 6, 0,
>> + max98927_spk_tlv),
>> + SOC_SINGLE_TLV("Digital Volume", MAX98927_R0036_AMP_VOL_CTRL,
>> + 0, (1<<MAX98927_AMP_VOL_WIDTH)-1, 0,
>> + max98927_digital_tlv),
>> + SOC_SINGLE("Amp DSP Switch", MAX98927_R0052_BROWNOUT_EN,
>> + MAX98927_BROWNOUT_DSP_SHIFT, 1, 0),
>> + SOC_SINGLE("Ramp Switch", MAX98927_R0037_AMP_DSP_CFG,
>> + MAX98927_AMP_DSP_CFG_RMP_SHIFT, 1, 0),
>> + SOC_SINGLE("DRE Switch", MAX98927_R0039_DRE_CTRL,
>> + MAX98927_DRE_EN_SHIFT, 1, 0),
>> + SOC_SINGLE("Volume Location Switch", MAX98927_R0036_AMP_VOL_CTRL,
>> + MAX98927_AMP_VOL_SEL_SHIFT, 1, 0),
>> + SOC_ENUM("Boost Output Voltage", max98927_boost_voltage),
>> + SOC_ENUM("Current Limit", max98927_current_limit),
>> +};
>> +
>> +static const struct snd_soc_dapm_route max98927_audio_map[] = {
>> + {"Amp Enable", NULL, "DAI_OUT"},
>> + {"DAI Sel Mux", "Left", "Amp Enable"},
>> + {"DAI Sel Mux", "Right", "Amp Enable"},
>> + {"DAI Sel Mux", "LeftRight", "Amp Enable"},
>> + {"BE_OUT", NULL, "DAI Sel Mux"},
>> +};
>> +
>> +static struct snd_soc_dai_driver max98927_dai[] = {
>> + {
>> + .name = "max98927-aif1",
>> + .playback = {
>> + .stream_name = "HiFi Playback",
>> + .channels_min = 1,
>> + .channels_max = 2,
>> + .rates = MAX98927_RATES,
>> + .formats = MAX98927_FORMATS,
>> + },
>> + .capture = {
>> + .stream_name = "HiFi Capture",
>> + .channels_min = 1,
>> + .channels_max = 2,
>> + .rates = MAX98927_RATES,
>> + .formats = MAX98927_FORMATS,
>> + },
>> + .ops = &max98927_dai_ops,
>> + }
>> +};
>> +
>> +static int max98927_probe(struct snd_soc_codec *codec)
>> +{
>> + struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
>> +
>> + max98927->codec = codec;
>> + codec->control_data = max98927->regmap;
>> + codec->cache_bypass = 1;
>> +
>> + /* Software Reset */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0100_SOFT_RESET, MAX98927_SOFT_RESET);
>> +
>> + /* IV default slot configuration */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R001C_PCM_TX_HIZ_CTRL_A,
>> + 0xFF);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R001D_PCM_TX_HIZ_CTRL_B,
>> + 0xFF);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0025_PCM_TO_SPK_MONOMIX_A,
>> + 0x80);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0026_PCM_TO_SPK_MONOMIX_B,
>> + 0x1);
>> + /* Set inital volume (+13dB) */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0036_AMP_VOL_CTRL,
>> + 0x38);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R003C_SPK_GAIN,
>> + 0x05);
>> + /* Enable DC blocker */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0037_AMP_DSP_CFG,
>> + 0x03);
>> + /* Enable IMON VMON DC blocker */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R003F_MEAS_DSP_CFG,
>> + 0xF7);
>> + /* Boost Output Voltage & Current limit */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0040_BOOST_CTRL0,
>> + 0x1C);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0042_BOOST_CTRL1,
>> + 0x3E);
>> + /* Measurement ADC config */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0043_MEAS_ADC_CFG,
>> + 0x04);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0044_MEAS_ADC_BASE_MSB,
>> + 0x00);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0045_MEAS_ADC_BASE_LSB,
>> + 0x24);
>> + /* Brownout Level */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1,
>> + 0x06);
>> + /* Envelope Tracking configuration */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM,
>> + 0x08);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0086_ENV_TRACK_CTRL,
>> + 0x01);
>> + regmap_write(max98927->regmap,
>> + MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ,
>> + 0x10);
>> +
>> + /* voltage, current slot configuration */
>> + regmap_write(max98927->regmap,
>> + MAX98927_R001E_PCM_TX_CH_SRC_A,
>> + (max98927->i_l_slot<<MAX98927_PCM_TX_CH_SRC_A_I_SHIFT|
>> + max98927->v_l_slot)&0xFF);
>> +
>> + if (max98927->v_l_slot < 8) {
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R001C_PCM_TX_HIZ_CTRL_A,
>> + 1 << max98927->v_l_slot, 0);
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R001A_PCM_TX_EN_A,
>> + 1 << max98927->v_l_slot,
>> + 1 << max98927->v_l_slot);
>> + } else {
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R001D_PCM_TX_HIZ_CTRL_B,
>> + 1 << (max98927->v_l_slot - 8), 0);
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R001B_PCM_TX_EN_B,
>> + 1 << (max98927->v_l_slot - 8),
>> + 1 << (max98927->v_l_slot - 8));
>> + }
>> +
>> + if (max98927->i_l_slot < 8) {
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R001C_PCM_TX_HIZ_CTRL_A,
>> + 1 << max98927->i_l_slot, 0);
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R001A_PCM_TX_EN_A,
>> + 1 << max98927->i_l_slot,
>> + 1 << max98927->i_l_slot);
>> + } else {
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R001D_PCM_TX_HIZ_CTRL_B,
>> + 1 << (max98927->i_l_slot - 8), 0);
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R001B_PCM_TX_EN_B,
>> + 1 << (max98927->i_l_slot - 8),
>> + 1 << (max98927->i_l_slot - 8));
>> + }
>> +
>> + /* Set interleave mode */
>> + if (max98927->interleave_mode)
>> + regmap_update_bits(max98927->regmap,
>> + MAX98927_R001F_PCM_TX_CH_SRC_B,
>> + MAX98927_PCM_TX_CH_INTERLEAVE_MASK,
>> + MAX98927_PCM_TX_CH_INTERLEAVE_MASK);
>> + return 0;
>> +}
>> +
>> +static const struct snd_soc_codec_driver soc_codec_dev_max98927 = {
>> + .probe = max98927_probe,
>> + .component_driver = {
>> + .controls = max98927_snd_controls,
>> + .num_controls = ARRAY_SIZE(max98927_snd_controls),
>> + .dapm_widgets = max98927_dapm_widgets,
>> + .num_dapm_widgets = ARRAY_SIZE(max98927_dapm_widgets),
>> + .dapm_routes = max98927_audio_map,
>> + .num_dapm_routes = ARRAY_SIZE(max98927_audio_map),
>> + },
>> +};
>> +
>> +static const struct regmap_config max98927_regmap = {
>> + .reg_bits = 16,
>> + .val_bits = 8,
>> + .max_register = MAX98927_R01FF_REV_ID,
>> + .reg_defaults = max98927_reg,
>> + .num_reg_defaults = ARRAY_SIZE(max98927_reg),
>> + .readable_reg = max98927_readable_register,
>> + .volatile_reg = max98927_volatile_reg,
>> + .cache_type = REGCACHE_RBTREE,
>> +};
>> +
>> +static void max98927_slot_config(struct i2c_client *i2c,
>> + struct max98927_priv *max98927)
>> +{
>> + int value;
>> +
>> + if (!of_property_read_u32(i2c->dev.of_node,
>> + "vmon-slot-no", &value))
>> + max98927->v_l_slot = value & 0xF;
>> + else
>> + max98927->v_l_slot = 0;
>> + if (!of_property_read_u32(i2c->dev.of_node,
>> + "imon-slot-no", &value))
>> + max98927->i_l_slot = value & 0xF;
>> + else
>> + max98927->i_l_slot = 1;
>> +}
>> +
>> +static int max98927_i2c_probe(struct i2c_client *i2c,
>> + const struct i2c_device_id *id)
>> +{
>> +
>> + int ret = 0, value;
>> + int reg = 0;
>> + struct max98927_priv *max98927 = NULL;
>> +
>> + max98927 = devm_kzalloc(&i2c->dev,
>> + sizeof(*max98927), GFP_KERNEL);
>> +
>> + if (!max98927) {
>> + ret = -ENOMEM;
>> + return ret;
>> + }
>> + i2c_set_clientdata(i2c, max98927);
>> +
>> + /* update interleave mode info */
>> + if (!of_property_read_u32(i2c->dev.of_node,
>> + "interleave_mode", &value)) {
>> + if (value > 0)
>> + max98927->interleave_mode = 1;
>> + else
>> + max98927->interleave_mode = 0;
>> + } else
>> + max98927->interleave_mode = 0;
>> +
>> + /* regmap initialization */
>> + max98927->regmap
>> + = devm_regmap_init_i2c(i2c, &max98927_regmap);
>> + if (IS_ERR(max98927->regmap)) {
>> + ret = PTR_ERR(max98927->regmap);
>> + dev_err(&i2c->dev,
>> + "Failed to allocate regmap: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + /* Check Revision ID */
>> + ret = regmap_read(max98927->regmap,
>> + MAX98927_R01FF_REV_ID, ®);
>> + if (ret < 0) {
>> + dev_err(&i2c->dev,
>> + "Failed to read: 0x%02X\n", MAX98927_R01FF_REV_ID);
>> + return ret;
>> + }
>> + dev_info(&i2c->dev, "MAX98927 revisionID: 0x%02X\n", reg);
>> +
>> + /* voltage/current slot configuration */
>> + max98927_slot_config(i2c, max98927);
>> +
>> + /* codec registeration */
>> + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_max98927,
>> + max98927_dai, ARRAY_SIZE(max98927_dai));
>> + if (ret < 0)
>> + dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
>> +
>> + return ret;
>> +}
>> +
>> +static int max98927_i2c_remove(struct i2c_client *client)
>> +{
>> + snd_soc_unregister_codec(&client->dev);
>> + return 0;
>> +}
>> +
>> +static const struct i2c_device_id max98927_i2c_id[] = {
>> + { "max98927", 0},
>> + { },
>> +};
>> +
>> +MODULE_DEVICE_TABLE(i2c, max98927_i2c_id);
>> +
>> +#if defined(CONFIG_OF)
>> +static const struct of_device_id max98927_of_match[] = {
>> + { .compatible = "maxim,max98927", },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, max98927_of_match);
>> +#endif
>> +
>> +#ifdef CONFIG_ACPI
>> +static const struct acpi_device_id max98927_acpi_match[] = {
>> + { "MX98927", 0 },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(acpi, max98927_acpi_match);
>> +#endif
>> +
>> +static struct i2c_driver max98927_i2c_driver = {
>> + .driver = {
>> + .name = "max98927",
>> + .of_match_table = of_match_ptr(max98927_of_match),
>> + .acpi_match_table = ACPI_PTR(max98927_acpi_match),
>> + .pm = NULL,
>> + },
>> + .probe = max98927_i2c_probe,
>> + .remove = max98927_i2c_remove,
>> + .id_table = max98927_i2c_id,
>> +};
>> +
>> +module_i2c_driver(max98927_i2c_driver)
>> +
>> +MODULE_DESCRIPTION("ALSA SoC MAX98927 driver");
>> +MODULE_AUTHOR("Ryan Lee <ryans.lee@...imintegrated.com>");
>> +MODULE_LICENSE("GPL");
>> diff --git a/sound/soc/codecs/max98927.h b/sound/soc/codecs/max98927.h
>> new file mode 100644
>> index 000000000000..ece6a608cbe1
>> --- /dev/null
>> +++ b/sound/soc/codecs/max98927.h
>> @@ -0,0 +1,272 @@
>> +/*
>> + * max98927.h -- MAX98927 ALSA Soc Audio driver
>> + *
>> + * Copyright 2013-15 Maxim Integrated Products
>> + * Author: Ryan Lee <ryans.lee@...imintegrated.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + *
>> + */
>> +#ifndef _MAX98927_H
>> +#define _MAX98927_H
>> +
>> +/* Register Values */
>> +#define MAX98927_R0001_INT_RAW1 0x0001
>> +#define MAX98927_R0002_INT_RAW2 0x0002
>> +#define MAX98927_R0003_INT_RAW3 0x0003
>> +#define MAX98927_R0004_INT_STATE1 0x0004
>> +#define MAX98927_R0005_INT_STATE2 0x0005
>> +#define MAX98927_R0006_INT_STATE3 0x0006
>> +#define MAX98927_R0007_INT_FLAG1 0x0007
>> +#define MAX98927_R0008_INT_FLAG2 0x0008
>> +#define MAX98927_R0009_INT_FLAG3 0x0009
>> +#define MAX98927_R000A_INT_EN1 0x000A
>> +#define MAX98927_R000B_INT_EN2 0x000B
>> +#define MAX98927_R000C_INT_EN3 0x000C
>> +#define MAX98927_R000D_INT_FLAG_CLR1 0x000D
>> +#define MAX98927_R000E_INT_FLAG_CLR2 0x000E
>> +#define MAX98927_R000F_INT_FLAG_CLR3 0x000F
>> +#define MAX98927_R0010_IRQ_CTRL 0x0010
>> +#define MAX98927_R0011_CLK_MON 0x0011
>> +#define MAX98927_R0012_WDOG_CTRL 0x0012
>> +#define MAX98927_R0013_WDOG_RST 0x0013
>> +#define MAX98927_R0014_MEAS_ADC_THERM_WARN_THRESH 0x0014
>> +#define MAX98927_R0015_MEAS_ADC_THERM_SHDN_THRESH 0x0015
>> +#define MAX98927_R0016_MEAS_ADC_THERM_HYSTERESIS 0x0016
>> +#define MAX98927_R0017_PIN_CFG 0x0017
>> +#define MAX98927_R0018_PCM_RX_EN_A 0x0018
>> +#define MAX98927_R0019_PCM_RX_EN_B 0x0019
>> +#define MAX98927_R001A_PCM_TX_EN_A 0x001A
>> +#define MAX98927_R001B_PCM_TX_EN_B 0x001B
>> +#define MAX98927_R001C_PCM_TX_HIZ_CTRL_A 0x001C
>> +#define MAX98927_R001D_PCM_TX_HIZ_CTRL_B 0x001D
>> +#define MAX98927_R001E_PCM_TX_CH_SRC_A 0x001E
>> +#define MAX98927_R001F_PCM_TX_CH_SRC_B 0x001F
>> +#define MAX98927_R0020_PCM_MODE_CFG 0x0020
>> +#define MAX98927_R0021_PCM_MASTER_MODE 0x0021
>> +#define MAX98927_R0022_PCM_CLK_SETUP 0x0022
>> +#define MAX98927_R0023_PCM_SR_SETUP1 0x0023
>> +#define MAX98927_R0024_PCM_SR_SETUP2 0x0024
>> +#define MAX98927_R0025_PCM_TO_SPK_MONOMIX_A 0x0025
>> +#define MAX98927_R0026_PCM_TO_SPK_MONOMIX_B 0x0026
>> +#define MAX98927_R0027_ICC_RX_EN_A 0x0027
>> +#define MAX98927_R0028_ICC_RX_EN_B 0x0028
>> +#define MAX98927_R002B_ICC_TX_EN_A 0x002B
>> +#define MAX98927_R002C_ICC_TX_EN_B 0x002C
>> +#define MAX98927_R002E_ICC_HIZ_MANUAL_MODE 0x002E
>> +#define MAX98927_R002F_ICC_TX_HIZ_EN_A 0x002F
>> +#define MAX98927_R0030_ICC_TX_HIZ_EN_B 0x0030
>> +#define MAX98927_R0031_ICC_LNK_EN 0x0031
>> +#define MAX98927_R0032_PDM_TX_EN 0x0032
>> +#define MAX98927_R0033_PDM_TX_HIZ_CTRL 0x0033
>> +#define MAX98927_R0034_PDM_TX_CTRL 0x0034
>> +#define MAX98927_R0035_PDM_RX_CTRL 0x0035
>> +#define MAX98927_R0036_AMP_VOL_CTRL 0x0036
>> +#define MAX98927_R0037_AMP_DSP_CFG 0x0037
>> +#define MAX98927_R0038_TONE_GEN_DC_CFG 0x0038
>> +#define MAX98927_R0039_DRE_CTRL 0x0039
>> +#define MAX98927_R003A_AMP_EN 0x003A
>> +#define MAX98927_R003B_SPK_SRC_SEL 0x003B
>> +#define MAX98927_R003C_SPK_GAIN 0x003C
>> +#define MAX98927_R003D_SSM_CFG 0x003D
>> +#define MAX98927_R003E_MEAS_EN 0x003E
>> +#define MAX98927_R003F_MEAS_DSP_CFG 0x003F
>> +#define MAX98927_R0040_BOOST_CTRL0 0x0040
>> +#define MAX98927_R0041_BOOST_CTRL3 0x0041
>> +#define MAX98927_R0042_BOOST_CTRL1 0x0042
>> +#define MAX98927_R0043_MEAS_ADC_CFG 0x0043
>> +#define MAX98927_R0044_MEAS_ADC_BASE_MSB 0x0044
>> +#define MAX98927_R0045_MEAS_ADC_BASE_LSB 0x0045
>> +#define MAX98927_R0046_ADC_CH0_DIVIDE 0x0046
>> +#define MAX98927_R0047_ADC_CH1_DIVIDE 0x0047
>> +#define MAX98927_R0048_ADC_CH2_DIVIDE 0x0048
>> +#define MAX98927_R0049_ADC_CH0_FILT_CFG 0x0049
>> +#define MAX98927_R004A_ADC_CH1_FILT_CFG 0x004A
>> +#define MAX98927_R004B_ADC_CH2_FILT_CFG 0x004B
>> +#define MAX98927_R004C_MEAS_ADC_CH0_READ 0x004C
>> +#define MAX98927_R004D_MEAS_ADC_CH1_READ 0x004D
>> +#define MAX98927_R004E_MEAS_ADC_CH2_READ 0x004E
>> +#define MAX98927_R0051_BROWNOUT_STATUS 0x0051
>> +#define MAX98927_R0052_BROWNOUT_EN 0x0052
>> +#define MAX98927_R0053_BROWNOUT_INFINITE_HOLD 0x0053
>> +#define MAX98927_R0054_BROWNOUT_INFINITE_HOLD_CLR 0x0054
>> +#define MAX98927_R0055_BROWNOUT_LVL_HOLD 0x0055
>> +#define MAX98927_R005A_BROWNOUT_LVL1_THRESH 0x005A
>> +#define MAX98927_R005B_BROWNOUT_LVL2_THRESH 0x005B
>> +#define MAX98927_R005C_BROWNOUT_LVL3_THRESH 0x005C
>> +#define MAX98927_R005D_BROWNOUT_LVL4_THRESH 0x005D
>> +#define MAX98927_R005E_BROWNOUT_THRESH_HYSTERYSIS 0x005E
>> +#define MAX98927_R005F_BROWNOUT_AMP_LIMITER_ATK_REL 0x005F
>> +#define MAX98927_R0060_BROWNOUT_AMP_GAIN_ATK_REL 0x0060
>> +#define MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE 0x0061
>> +#define MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT 0x0072
>> +#define MAX98927_R0073_BROWNOUT_LVL1_AMP1_CTRL1 0x0073
>> +#define MAX98927_R0074_BROWNOUT_LVL1_AMP1_CTRL2 0x0074
>> +#define MAX98927_R0075_BROWNOUT_LVL1_AMP1_CTRL3 0x0075
>> +#define MAX98927_R0076_BROWNOUT_LVL2_CUR_LIMIT 0x0076
>> +#define MAX98927_R0077_BROWNOUT_LVL2_AMP1_CTRL1 0x0077
>> +#define MAX98927_R0078_BROWNOUT_LVL2_AMP1_CTRL2 0x0078
>> +#define MAX98927_R0079_BROWNOUT_LVL2_AMP1_CTRL3 0x0079
>> +#define MAX98927_R007A_BROWNOUT_LVL3_CUR_LIMIT 0x007A
>> +#define MAX98927_R007B_BROWNOUT_LVL3_AMP1_CTRL1 0x007B
>> +#define MAX98927_R007C_BROWNOUT_LVL3_AMP1_CTRL2 0x007C
>> +#define MAX98927_R007D_BROWNOUT_LVL3_AMP1_CTRL3 0x007D
>> +#define MAX98927_R007E_BROWNOUT_LVL4_CUR_LIMIT 0x007E
>> +#define MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1 0x007F
>> +#define MAX98927_R0080_BROWNOUT_LVL4_AMP1_CTRL2 0x0080
>> +#define MAX98927_R0081_BROWNOUT_LVL4_AMP1_CTRL3 0x0081
>> +#define MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM 0x0082
>> +#define MAX98927_R0083_ENV_TRACK_BOOST_VOUT_DELAY 0x0083
>> +#define MAX98927_R0084_ENV_TRACK_REL_RATE 0x0084
>> +#define MAX98927_R0085_ENV_TRACK_HOLD_RATE 0x0085
>> +#define MAX98927_R0086_ENV_TRACK_CTRL 0x0086
>> +#define MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ 0x0087
>> +#define MAX98927_R00FF_GLOBAL_SHDN 0x00FF
>> +#define MAX98927_R0100_SOFT_RESET 0x0100
>> +#define MAX98927_R01FF_REV_ID 0x01FF
>> +
>> +/* MAX98927_R0018_PCM_RX_EN_A */
>> +#define MAX98927_PCM_RX_CH0_EN (0x1 << 0)
>> +#define MAX98927_PCM_RX_CH1_EN (0x1 << 1)
>> +#define MAX98927_PCM_RX_CH2_EN (0x1 << 2)
>> +#define MAX98927_PCM_RX_CH3_EN (0x1 << 3)
>> +#define MAX98927_PCM_RX_CH4_EN (0x1 << 4)
>> +#define MAX98927_PCM_RX_CH5_EN (0x1 << 5)
>> +#define MAX98927_PCM_RX_CH6_EN (0x1 << 6)
>> +#define MAX98927_PCM_RX_CH7_EN (0x1 << 7)
>> +
>> +/* MAX98927_R001A_PCM_TX_EN_A */
>> +#define MAX98927_PCM_TX_CH0_EN (0x1 << 0)
>> +#define MAX98927_PCM_TX_CH1_EN (0x1 << 1)
>> +#define MAX98927_PCM_TX_CH2_EN (0x1 << 2)
>> +#define MAX98927_PCM_TX_CH3_EN (0x1 << 3)
>> +#define MAX98927_PCM_TX_CH4_EN (0x1 << 4)
>> +#define MAX98927_PCM_TX_CH5_EN (0x1 << 5)
>> +#define MAX98927_PCM_TX_CH6_EN (0x1 << 6)
>> +#define MAX98927_PCM_TX_CH7_EN (0x1 << 7)
>> +
>> +/* MAX98927_R001E_PCM_TX_CH_SRC_A */
>> +#define MAX98927_PCM_TX_CH_SRC_A_V_SHIFT (0)
>> +#define MAX98927_PCM_TX_CH_SRC_A_I_SHIFT (4)
>> +
>> +/* MAX98927_R001F_PCM_TX_CH_SRC_B */
>> +#define MAX98927_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 5)
>> +
>> +/* MAX98927_R0020_PCM_MODE_CFG */
>> +#define MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2)
>> +#define MAX98927_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3)
>> +#define MAX98927_PCM_MODE_CFG_FORMAT_SHIFT (3)
>> +#define MAX98927_PCM_FORMAT_I2S (0x0 << 0)
>> +#define MAX98927_PCM_FORMAT_LJ (0x1 << 0)
>> +
>> +#define MAX98927_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6)
>> +#define MAX98927_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6)
>> +#define MAX98927_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6)
>> +#define MAX98927_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6)
>> +
>> +/* MAX98927_R0021_PCM_MASTER_MODE */
>> +#define MAX98927_PCM_MASTER_MODE_MASK (0x3 << 0)
>> +#define MAX98927_PCM_MASTER_MODE_SLAVE (0x0 << 0)
>> +#define MAX98927_PCM_MASTER_MODE_MASTER (0x3 << 0)
>> +
>> +#define MAX98927_PCM_MASTER_MODE_MCLK_MASK (0xF << 2)
>> +#define MAX98927_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2)
>> +
>> +/* MAX98927_R0022_PCM_CLK_SETUP */
>> +#define MAX98927_PCM_CLK_SETUP_BSEL_MASK (0xF << 0)
>> +
>> +/* MAX98927_R0023_PCM_SR_SETUP1 */
>> +#define MAX98927_PCM_SR_SET1_SR_MASK (0xF << 0)
>> +
>> +#define MAX98927_PCM_SR_SET1_SR_8000 (0x0 << 0)
>> +#define MAX98927_PCM_SR_SET1_SR_11025 (0x1 << 0)
>> +#define MAX98927_PCM_SR_SET1_SR_12000 (0x2 << 0)
>> +#define MAX98927_PCM_SR_SET1_SR_16000 (0x3 << 0)
>> +#define MAX98927_PCM_SR_SET1_SR_22050 (0x4 << 0)
>> +#define MAX98927_PCM_SR_SET1_SR_24000 (0x5 << 0)
>> +#define MAX98927_PCM_SR_SET1_SR_32000 (0x6 << 0)
>> +#define MAX98927_PCM_SR_SET1_SR_44100 (0x7 << 0)
>> +#define MAX98927_PCM_SR_SET1_SR_48000 (0x8 << 0)
>> +
>> +/* MAX98927_R0024_PCM_SR_SETUP2 */
>> +#define MAX98927_PCM_SR_SET2_SR_MASK (0xF << 4)
>> +#define MAX98927_PCM_SR_SET2_SR_SHIFT (4)
>> +#define MAX98927_PCM_SR_SET2_IVADC_SR_MASK (0xf << 0)
>> +
>> +/* MAX98927_R0025_PCM_TO_SPK_MONOMIX_A */
>> +#define MAX98927_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6)
>> +#define MAX98927_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6)
>> +
>> +/* MAX98927_R0035_PDM_RX_CTRL */
>> +#define MAX98927_PDM_RX_EN_MASK (0x1 << 0)
>> +
>> +/* MAX98927_R0036_AMP_VOL_CTRL */
>> +#define MAX98927_AMP_VOL_SEL (0x1 << 7)
>> +#define MAX98927_AMP_VOL_SEL_WIDTH (1)
>> +#define MAX98927_AMP_VOL_SEL_SHIFT (7)
>> +#define MAX98927_AMP_VOL_MASK (0x7f << 0)
>> +#define MAX98927_AMP_VOL_WIDTH (7)
>> +#define MAX98927_AMP_VOL_SHIFT (0)
>> +
>> +/* MAX98927_R0037_AMP_DSP_CFG */
>> +#define MAX98927_AMP_DSP_CFG_DCBLK_EN (0x1 << 0)
>> +#define MAX98927_AMP_DSP_CFG_DITH_EN (0x1 << 1)
>> +#define MAX98927_AMP_DSP_CFG_RMP_BYPASS (0x1 << 4)
>> +#define MAX98927_AMP_DSP_CFG_DAC_INV (0x1 << 5)
>> +#define MAX98927_AMP_DSP_CFG_RMP_SHIFT (4)
>> +
>> +/* MAX98927_R0039_DRE_CTRL */
>> +#define MAX98927_DRE_CTRL_DRE_EN (0x1 << 0)
>> +#define MAX98927_DRE_EN_SHIFT 0x1
>> +
>> +/* MAX98927_R003A_AMP_EN */
>> +#define MAX98927_AMP_EN_MASK (0x1 << 0)
>> +
>> +/* MAX98927_R003B_SPK_SRC_SEL */
>> +#define MAX98927_SPK_SRC_MASK (0x3 << 0)
>> +
>> +/* MAX98927_R003C_SPK_GAIN */
>> +#define MAX98927_SPK_PCM_GAIN_MASK (0x7 << 0)
>> +#define MAX98927_SPK_PDM_GAIN_MASK (0x7 << 4)
>> +#define MAX98927_SPK_GAIN_WIDTH (3)
>> +
>> +/* MAX98927_R003E_MEAS_EN */
>> +#define MAX98927_MEAS_V_EN (0x1 << 0)
>> +#define MAX98927_MEAS_I_EN (0x1 << 1)
>> +
>> +/* MAX98927_R0040_BOOST_CTRL0 */
>> +#define MAX98927_BOOST_CTRL0_VOUT_MASK (0x1f << 0)
>> +#define MAX98927_BOOST_CTRL0_PVDD_MASK (0x1 << 7)
>> +#define MAX98927_BOOST_CTRL0_PVDD_EN_SHIFT (7)
>> +
>> +/* MAX98927_R0052_BROWNOUT_EN */
>> +#define MAX98927_BROWNOUT_BDE_EN (0x1 << 0)
>> +#define MAX98927_BROWNOUT_AMP_EN (0x1 << 1)
>> +#define MAX98927_BROWNOUT_DSP_EN (0x1 << 2)
>> +#define MAX98927_BROWNOUT_DSP_SHIFT (2)
>> +
>> +/* MAX98927_R0100_SOFT_RESET */
>> +#define MAX98927_SOFT_RESET (0x1 << 0)
>> +
>> +/* MAX98927_R00FF_GLOBAL_SHDN */
>> +#define MAX98927_GLOBAL_EN_MASK (0x1 << 0)
>> +
>> +struct max98927_priv {
>> + struct regmap *regmap;
>> + struct snd_soc_codec *codec;
>> + struct max98927_pdata *pdata;
>> + unsigned int spk_gain;
>> + unsigned int sysclk;
>> + unsigned int v_l_slot;
>> + unsigned int i_l_slot;
>> + bool interleave_mode;
>> + unsigned int ch_size;
>> + unsigned int rate;
>> + unsigned int iface;
>> + unsigned int master;
>> + unsigned int digital_gain;
>> +};
>> +#endif
>> --
>> 2.11.0
>>
Powered by blists - more mailing lists