[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170428200824.10906-13-paul@crapouillou.net>
Date: Fri, 28 Apr 2017 22:08:22 +0200
From: Paul Cercueil <paul@...pouillou.net>
To: Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ralf Baechle <ralf@...ux-mips.org>
Cc: Boris Brezillon <boris.brezillon@...e-electrons.com>,
Thierry Reding <thierry.reding@...il.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Maarten ter Huurne <maarten@...ewalker.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Paul Burton <paul.burton@...tec.com>, james.hogan@...tec.com,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mips@...ux-mips.org,
linux-mmc@...r.kernel.org, linux-mtd@...ts.infradead.org,
linux-pwm@...r.kernel.org, linux-fbdev@...r.kernel.org,
Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH v5 12/14] fbdev: jz4740-fb: Let the pinctrl driver configure the pins
Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on
the pins being properly configured before the driver probes.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
drivers/video/fbdev/jz4740_fb.c | 104 ++--------------------------------------
1 file changed, 3 insertions(+), 101 deletions(-)
v2: No changes
v3: No changes
v4: No changes
v5: No changes
diff --git a/drivers/video/fbdev/jz4740_fb.c b/drivers/video/fbdev/jz4740_fb.c
index 87790e9644d0..b57df83fdbd3 100644
--- a/drivers/video/fbdev/jz4740_fb.c
+++ b/drivers/video/fbdev/jz4740_fb.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/clk.h>
#include <linux/delay.h>
@@ -27,7 +28,6 @@
#include <linux/dma-mapping.h>
#include <asm/mach-jz4740/jz4740_fb.h>
-#include <asm/mach-jz4740/gpio.h>
#define JZ_REG_LCD_CFG 0x00
#define JZ_REG_LCD_VSYNC 0x04
@@ -146,93 +146,6 @@ static const struct fb_fix_screeninfo jzfb_fix = {
.accel = FB_ACCEL_NONE,
};
-static const struct jz_gpio_bulk_request jz_lcd_ctrl_pins[] = {
- JZ_GPIO_BULK_PIN(LCD_PCLK),
- JZ_GPIO_BULK_PIN(LCD_HSYNC),
- JZ_GPIO_BULK_PIN(LCD_VSYNC),
- JZ_GPIO_BULK_PIN(LCD_DE),
- JZ_GPIO_BULK_PIN(LCD_PS),
- JZ_GPIO_BULK_PIN(LCD_REV),
- JZ_GPIO_BULK_PIN(LCD_CLS),
- JZ_GPIO_BULK_PIN(LCD_SPL),
-};
-
-static const struct jz_gpio_bulk_request jz_lcd_data_pins[] = {
- JZ_GPIO_BULK_PIN(LCD_DATA0),
- JZ_GPIO_BULK_PIN(LCD_DATA1),
- JZ_GPIO_BULK_PIN(LCD_DATA2),
- JZ_GPIO_BULK_PIN(LCD_DATA3),
- JZ_GPIO_BULK_PIN(LCD_DATA4),
- JZ_GPIO_BULK_PIN(LCD_DATA5),
- JZ_GPIO_BULK_PIN(LCD_DATA6),
- JZ_GPIO_BULK_PIN(LCD_DATA7),
- JZ_GPIO_BULK_PIN(LCD_DATA8),
- JZ_GPIO_BULK_PIN(LCD_DATA9),
- JZ_GPIO_BULK_PIN(LCD_DATA10),
- JZ_GPIO_BULK_PIN(LCD_DATA11),
- JZ_GPIO_BULK_PIN(LCD_DATA12),
- JZ_GPIO_BULK_PIN(LCD_DATA13),
- JZ_GPIO_BULK_PIN(LCD_DATA14),
- JZ_GPIO_BULK_PIN(LCD_DATA15),
- JZ_GPIO_BULK_PIN(LCD_DATA16),
- JZ_GPIO_BULK_PIN(LCD_DATA17),
-};
-
-static unsigned int jzfb_num_ctrl_pins(struct jzfb *jzfb)
-{
- unsigned int num;
-
- switch (jzfb->pdata->lcd_type) {
- case JZ_LCD_TYPE_GENERIC_16_BIT:
- num = 4;
- break;
- case JZ_LCD_TYPE_GENERIC_18_BIT:
- num = 4;
- break;
- case JZ_LCD_TYPE_8BIT_SERIAL:
- num = 3;
- break;
- case JZ_LCD_TYPE_SPECIAL_TFT_1:
- case JZ_LCD_TYPE_SPECIAL_TFT_2:
- case JZ_LCD_TYPE_SPECIAL_TFT_3:
- num = 8;
- break;
- default:
- num = 0;
- break;
- }
- return num;
-}
-
-static unsigned int jzfb_num_data_pins(struct jzfb *jzfb)
-{
- unsigned int num;
-
- switch (jzfb->pdata->lcd_type) {
- case JZ_LCD_TYPE_GENERIC_16_BIT:
- num = 16;
- break;
- case JZ_LCD_TYPE_GENERIC_18_BIT:
- num = 18;
- break;
- case JZ_LCD_TYPE_8BIT_SERIAL:
- num = 8;
- break;
- case JZ_LCD_TYPE_SPECIAL_TFT_1:
- case JZ_LCD_TYPE_SPECIAL_TFT_2:
- case JZ_LCD_TYPE_SPECIAL_TFT_3:
- if (jzfb->pdata->bpp == 18)
- num = 18;
- else
- num = 16;
- break;
- default:
- num = 0;
- break;
- }
- return num;
-}
-
/* Based on CNVT_TOHW macro from skeletonfb.c */
static inline uint32_t jzfb_convert_color_to_hw(unsigned val,
struct fb_bitfield *bf)
@@ -487,8 +400,7 @@ static void jzfb_enable(struct jzfb *jzfb)
clk_prepare_enable(jzfb->ldclk);
- jz_gpio_bulk_resume(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
- jz_gpio_bulk_resume(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
+ pinctrl_pm_select_default_state(&jzfb->pdev->dev);
writel(0, jzfb->base + JZ_REG_LCD_STATE);
@@ -511,8 +423,7 @@ static void jzfb_disable(struct jzfb *jzfb)
ctrl = readl(jzfb->base + JZ_REG_LCD_STATE);
} while (!(ctrl & JZ_LCD_STATE_DISABLED));
- jz_gpio_bulk_suspend(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
- jz_gpio_bulk_suspend(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
+ pinctrl_pm_select_sleep_state(&jzfb->pdev->dev);
clk_disable_unprepare(jzfb->ldclk);
}
@@ -701,9 +612,6 @@ static int jzfb_probe(struct platform_device *pdev)
fb->mode = NULL;
jzfb_set_par(fb);
- jz_gpio_bulk_request(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
- jz_gpio_bulk_request(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
-
ret = register_framebuffer(fb);
if (ret) {
dev_err(&pdev->dev, "Failed to register framebuffer: %d\n", ret);
@@ -715,9 +623,6 @@ static int jzfb_probe(struct platform_device *pdev)
return 0;
err_free_devmem:
- jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
- jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
-
fb_dealloc_cmap(&fb->cmap);
jzfb_free_devmem(jzfb);
err_framebuffer_release:
@@ -731,9 +636,6 @@ static int jzfb_remove(struct platform_device *pdev)
jzfb_blank(FB_BLANK_POWERDOWN, jzfb->fb);
- jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
- jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
-
fb_dealloc_cmap(&jzfb->fb->cmap);
jzfb_free_devmem(jzfb);
--
2.11.0
Powered by blists - more mailing lists