lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170501212732.368741680@linuxfoundation.org>
Date:   Mon,  1 May 2017 14:34:54 -0700
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Andrey Konovalov <andreyknvl@...gle.com>,
        Steffen Klassert <steffen.klassert@...unet.com>,
        Cong Wang <xiyou.wangcong@...il.com>,
        "David S. Miller" <davem@...emloft.net>
Subject: [PATCH 4.10 41/62] ipv6: check skb->protocol before lookup for nexthop

4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: WANG Cong <xiyou.wangcong@...il.com>


[ Upstream commit 199ab00f3cdb6f154ea93fa76fd80192861a821d ]

Andrey reported a out-of-bound access in ip6_tnl_xmit(), this
is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4
neigh key as an IPv6 address:

        neigh = dst_neigh_lookup(skb_dst(skb),
                                 &ipv6_hdr(skb)->daddr);
        if (!neigh)
                goto tx_err_link_failure;

        addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE
        addr_type = ipv6_addr_type(addr6);

        if (addr_type == IPV6_ADDR_ANY)
                addr6 = &ipv6_hdr(skb)->daddr;

        memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr));

Also the network header of the skb at this point should be still IPv4
for 4in6 tunnels, we shold not just use it as IPv6 header.

This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it
is, we are safe to do the nexthop lookup using skb_dst() and
ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which
dest address we can pick here, we have to rely on callers to fill it
from tunnel config, so just fall to ip6_route_output() to make the
decision.

Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.")
Reported-by: Andrey Konovalov <andreyknvl@...gle.com>
Tested-by: Andrey Konovalov <andreyknvl@...gle.com>
Cc: Steffen Klassert <steffen.klassert@...unet.com>
Signed-off-by: Cong Wang <xiyou.wangcong@...il.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 net/ipv6/ip6_tunnel.c |   44 +++++++++++++++++++++++---------------------
 1 file changed, 23 insertions(+), 21 deletions(-)

--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1037,7 +1037,7 @@ int ip6_tnl_xmit(struct sk_buff *skb, st
 	struct ip6_tnl *t = netdev_priv(dev);
 	struct net *net = t->net;
 	struct net_device_stats *stats = &t->dev->stats;
-	struct ipv6hdr *ipv6h = ipv6_hdr(skb);
+	struct ipv6hdr *ipv6h;
 	struct ipv6_tel_txoption opt;
 	struct dst_entry *dst = NULL, *ndst = NULL;
 	struct net_device *tdev;
@@ -1057,26 +1057,28 @@ int ip6_tnl_xmit(struct sk_buff *skb, st
 
 	/* NBMA tunnel */
 	if (ipv6_addr_any(&t->parms.raddr)) {
-		struct in6_addr *addr6;
-		struct neighbour *neigh;
-		int addr_type;
-
-		if (!skb_dst(skb))
-			goto tx_err_link_failure;
-
-		neigh = dst_neigh_lookup(skb_dst(skb),
-					 &ipv6_hdr(skb)->daddr);
-		if (!neigh)
-			goto tx_err_link_failure;
-
-		addr6 = (struct in6_addr *)&neigh->primary_key;
-		addr_type = ipv6_addr_type(addr6);
-
-		if (addr_type == IPV6_ADDR_ANY)
-			addr6 = &ipv6_hdr(skb)->daddr;
-
-		memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr));
-		neigh_release(neigh);
+		if (skb->protocol == htons(ETH_P_IPV6)) {
+			struct in6_addr *addr6;
+			struct neighbour *neigh;
+			int addr_type;
+
+			if (!skb_dst(skb))
+				goto tx_err_link_failure;
+
+			neigh = dst_neigh_lookup(skb_dst(skb),
+						 &ipv6_hdr(skb)->daddr);
+			if (!neigh)
+				goto tx_err_link_failure;
+
+			addr6 = (struct in6_addr *)&neigh->primary_key;
+			addr_type = ipv6_addr_type(addr6);
+
+			if (addr_type == IPV6_ADDR_ANY)
+				addr6 = &ipv6_hdr(skb)->daddr;
+
+			memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr));
+			neigh_release(neigh);
+		}
 	} else if (!(t->parms.flags &
 		     (IP6_TNL_F_USE_ORIG_TCLASS | IP6_TNL_F_USE_ORIG_FWMARK))) {
 		/* enable the cache only only if the routing decision does


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ