linux-kernel - [PATCH] arm: proc-v7-3level.S: SOC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20170502094718.188172-2-yanjiang.jin@windriver.com>
Date:   Tue, 2 May 2017 17:47:18 +0800
From:   <yanjiang.jin@...driver.com>
To:     <linux@...linux.org.uk>, <b35083@...escale.com>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <yanjiang.jin@...driver.com>, <linux-kernel@...r.kernel.org>,
        <jinyanjiang@...il.com>
Subject: [PATCH] arm: proc-v7-3level.S: SOC_LS1021A: clear TTBCR.T1SZ

From: Yanjiang Jin <yanjiang.jin@...driver.com>

The macro "v7_ttb_setup" will set "TTBCR.T1SZ" only when
"PHYS_OFFSET <= PAGE_OFFSET".
But if we load the second kernel during kdump boot, PHYS_OFFSET may be
greater than PAGE_OFFSET, we don't want to set this bit, but TTBCR.T1SZ
is still not zero since the first kernel's value is reserved.
In this circumstance, the second kernel would hang once the MMU is enabled.

Signed-off-by: Yanjiang Jin <yanjiang.jin@...driver.com>
---
 arch/arm/mm/proc-v7-3level.S | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index 5e5720e..b6ca5eb 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -140,12 +140,16 @@ ENDPROC(cpu_v7_set_pte_ext)
 	 * otherwise booting secondary CPUs would end up using TTBR1 for the
 	 * identity mapping set up in TTBR0.
 	 */
-	orrls	\tmp, \tmp, #TTBR1_SIZE				@ TTBCR.T1SZ
-	mcr	p15, 0, \tmp, c2, c0, 2				@ TTBCR
+
+#ifdef CONFIG_SOC_LS1021A
+	bic	\tmp, \tmp, #TTBR1_SIZE		@ clear TTBCR.T1SZ first
+#endif
+	orrls	\tmp, \tmp, #TTBR1_SIZE		@ TTBCR.T1SZ
+	mcr	p15, 0, \tmp, c2, c0, 2		@ TTBCR
 	mov	\tmp, \ttbr1, lsr #20
 	mov	\ttbr1, \ttbr1, lsl #12
 	addls	\ttbr1, \ttbr1, #TTBR1_OFFSET
-	mcrr	p15, 1, \ttbr1, \tmp, c2			@ load TTBR1
+	mcrr	p15, 1, \ttbr1, \tmp, c2	@ load TTBR1
 	.endm
 
 	/*
-- 
1.9.1