| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a59c48cf-65e8-36db-edfa-23fea78afe46@st.com>
Date: Tue, 2 May 2017 14:38:02 +0200
From: Fabrice Gasnier <fabrice.gasnier@...com>
To: Jonathan Cameron <jic23@...nel.org>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>
CC: <linux-iio@...r.kernel.org>, Lars-Peter Clausen <lars@...afoo.de>,
Hartmut Knaack <knaack.h@....de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
<linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Benjamin GAIGNARD <benjamin.gaignard@...com>
Subject: Re: [PATCH] iio: stm32 trigger: Add support for TRGO2 triggers
On 04/30/2017 07:07 PM, Jonathan Cameron wrote:
> On 28/04/17 15:52, Fabrice Gasnier wrote:
>> On 04/27/2017 07:49 AM, Jonathan Cameron wrote:
>>> On 26/04/17 09:55, Benjamin Gaignard wrote:
>>>> 2017-04-26 10:17 GMT+02:00 Fabrice Gasnier <fabrice.gasnier@...com>:
>>>>> Add support for TRGO2 trigger that can be found on STM32F7.
>>>>> Add additional master modes supported by TRGO2.
>>> These additional modes would benefit from more information in the
>>> ABI docs. Otherwise patch seems fine, though this may win
>>> the award for hardest hardware to come up with a generic
>>> interface for...
>>>>> Register additional "tim[1/8]_trgo2" triggers for timer1 & timer8.
>>>>> Detect TRGO2 timer capability (master mode selection 2).
>>>>>
>>>>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
>>>>> ---
>>>>> .../ABI/testing/sysfs-bus-iio-timer-stm32 | 15 +++
>>>>> drivers/iio/trigger/stm32-timer-trigger.c | 113 ++++++++++++++++++---
>>>>> include/linux/iio/timer/stm32-timer-trigger.h | 2 +
>>>>> include/linux/mfd/stm32-timers.h | 2 +
>>>>> 4 files changed, 118 insertions(+), 14 deletions(-)
>>>>>
>>>>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
>>>>> index 230020e..47647b4 100644
>>>>> --- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
>>>>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
>>>>> @@ -16,6 +16,21 @@ Description:
>>>>> - "OC2REF" : OC2REF signal is used as trigger output.
>>>>> - "OC3REF" : OC3REF signal is used as trigger output.
>>>>> - "OC4REF" : OC4REF signal is used as trigger output.
>>>>> + Additional modes (on TRGO2 only):
>>>>> + - "OC5REF" : OC5REF signal is used as trigger output.
>>>>> + - "OC6REF" : OC6REF signal is used as trigger output.
>>>>> + - "compare_pulse_OC4REF":
>>>>> + OC4REF rising or falling edges generate pulses.
>>> I'd like this to be fairly understandable without resorting to reading the
>>> datasheet. As I understand it you get a fixed term pulse on both edges
>>> of the waveform? Perhaps this calls for some ascii art :)
>>
>> Hi Jonathan,
>>
>> If you feel like it needs more documentation, I'd rather prefer to add
>> reference or link to the datasheet... That will be more accurate,
>> up-to-date (e.g. like RM0385 pdf). Does this sound ok ? Or...
> Datasheet is good, but give it 10 years and chances are it will disappear
> into a black hole, whereas the hardware might still be in use by someone.
> Some of the hardware I use is at least that old. Frankly this laptop is
> getting close ;)
>>
>> Just in case, I prepared some ascii art, hope it clarify things.
>> I'm wondering if this is best place to put it ?
>> Shouldn't this be added in source code, instead of ABI Doc ?
> Could be either, but arguably the ABI docs should be all that a
> userspace developer should need to see. This isn't an internal
> detail afterall.
>> Maybe I can skip 1st part of it, heading boxes? (only example is enough?
>> or not...)
>>
>> +-----------+ +-------------+ +---------+
>> | Prescaler +-> | Counter | +-> | Master | TRGO(2)
>> +-----------+ +--+--------+-+ |-> | Control +-->
>> | | || +---------+
>> +--v--------+-+ OCxREF || +---------+
>> | Chx compare +----------> | Output | ChX
>> +-----------+-+ | | Control +-->
>> . | | +---------+
>> . | | .
>> +-----------v-+ OC6REF | .
>> | Ch6 compare +---------+>
>> +-------------+
>>
>> Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":
>>
>> X
>> X X
>> X . . X
>> X . . X
>> X . . X
>> count X . . . . X
>> . . . .
>> . . . .
>> +---------------+
>> OC4REF | . . |
>> +-+ . . +-+
>> . +---+ .
>> OC6REF . | | .
>> +-------+ +-------+
>> +-+ +-+
>> TRGO2 | | | |
>> +-+ +---+ +---------+
> This is good stuff so I'd put it in the ABI docs.
>
Hi Jonathan,
Thanks, I just sent a v2 that includes this.
Best Regards,
Fabrice
> Jonathan
>>
>>
>> side note: this isn't my house ;-)
> :)
>>
>> Please advise,
>> Thanks,
>> Fabrice
>>
>>
>>>>> + - "compare_pulse_OC6REF":
>>>>> + OC6REF rising or falling edges generate pulses.
>>>>> + - "compare_pulse_OC4REF_r_or_OC6REF_r":
>>>>> + OC4REF or OC6REF rising edges generate pulses.
>>>>> + - "compare_pulse_OC4REF_r_or_OC6REF_f":
>>>>> + OC4REF rising or OC6REF falling edges generate pulses.
>>>>> + - "compare_pulse_OC5REF_r_or_OC6REF_r":
>>>>> + OC5REF or OC6REF rising edges generate pulses.
>>>>> + - "compare_pulse_OC5REF_r_or_OC6REF_f":
>>>>> + OC5REF rising or OC6REF falling edges generate pulses.
>>>>>
>>>>> What: /sys/bus/iio/devices/triggerX/master_mode
>>>>> KernelVersion: 4.11
>>>>> diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
>>>>> index 0f1a2cf..a0031b7 100644
>>>>> --- a/drivers/iio/trigger/stm32-timer-trigger.c
>>>>> +++ b/drivers/iio/trigger/stm32-timer-trigger.c
>>>>> @@ -14,19 +14,19 @@
>>>>> #include <linux/module.h>
>>>>> #include <linux/platform_device.h>
>>>>>
>>>>> -#define MAX_TRIGGERS 6
>>>>> +#define MAX_TRIGGERS 7
>>>>> #define MAX_VALIDS 5
>>>>>
>>>>> /* List the triggers created by each timer */
>>>>> static const void *triggers_table[][MAX_TRIGGERS] = {
>>>>> - { TIM1_TRGO, TIM1_CH1, TIM1_CH2, TIM1_CH3, TIM1_CH4,},
>>>>> + { TIM1_TRGO, TIM1_TRGO2, TIM1_CH1, TIM1_CH2, TIM1_CH3, TIM1_CH4,},
>>>>> { TIM2_TRGO, TIM2_CH1, TIM2_CH2, TIM2_CH3, TIM2_CH4,},
>>>>> { TIM3_TRGO, TIM3_CH1, TIM3_CH2, TIM3_CH3, TIM3_CH4,},
>>>>> { TIM4_TRGO, TIM4_CH1, TIM4_CH2, TIM4_CH3, TIM4_CH4,},
>>>>> { TIM5_TRGO, TIM5_CH1, TIM5_CH2, TIM5_CH3, TIM5_CH4,},
>>>>> { TIM6_TRGO,},
>>>>> { TIM7_TRGO,},
>>>>> - { TIM8_TRGO, TIM8_CH1, TIM8_CH2, TIM8_CH3, TIM8_CH4,},
>>>>> + { TIM8_TRGO, TIM8_TRGO2, TIM8_CH1, TIM8_CH2, TIM8_CH3, TIM8_CH4,},
>>>>> { TIM9_TRGO, TIM9_CH1, TIM9_CH2,},
>>>>> { }, /* timer 10 */
>>>>> { }, /* timer 11 */
>>>>> @@ -56,9 +56,16 @@ struct stm32_timer_trigger {
>>>>> u32 max_arr;
>>>>> const void *triggers;
>>>>> const void *valids;
>>>>> + bool has_trgo2;
>>>>> };
>>>>>
>>>>> +static bool stm32_timer_is_trgo2_name(const char *name)
>>>>> +{
>>>>> + return !!strstr(name, "trgo2");
>>>>> +}
>>>>> +
>>>>> static int stm32_timer_start(struct stm32_timer_trigger *priv,
>>>>> + struct iio_trigger *trig,
>>>>> unsigned int frequency)
>>>>> {
>>>>> unsigned long long prd, div;
>>>>> @@ -102,7 +109,12 @@ static int stm32_timer_start(struct stm32_timer_trigger *priv,
>>>>> regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE);
>>>>>
>>>>> /* Force master mode to update mode */
>>>>> - regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0x20);
>>>>> + if (stm32_timer_is_trgo2_name(trig->name))
>>>>> + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2,
>>>>> + 0x2 << TIM_CR2_MMS2_SHIFT);
>>>>> + else
>>>>> + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS,
>>>>> + 0x2 << TIM_CR2_MMS_SHIFT);
>>>>>
>>>>> /* Make sure that registers are updated */
>>>>> regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
>>>>> @@ -150,7 +162,7 @@ static ssize_t stm32_tt_store_frequency(struct device *dev,
>>>>> if (freq == 0) {
>>>>> stm32_timer_stop(priv);
>>>>> } else {
>>>>> - ret = stm32_timer_start(priv, freq);
>>>>> + ret = stm32_timer_start(priv, trig, freq);
>>>>> if (ret)
>>>>> return ret;
>>>>> }
>>>>> @@ -183,6 +195,9 @@ static IIO_DEV_ATTR_SAMP_FREQ(0660,
>>>>> stm32_tt_read_frequency,
>>>>> stm32_tt_store_frequency);
>>>>>
>>>>> +#define MASTER_MODE_MAX 7
>>>>> +#define MASTER_MODE2_MAX 15
>>>>> +
>>>>> static char *master_mode_table[] = {
>>>>> "reset",
>>>>> "enable",
>>>>> @@ -191,7 +206,16 @@ static IIO_DEV_ATTR_SAMP_FREQ(0660,
>>>>> "OC1REF",
>>>>> "OC2REF",
>>>>> "OC3REF",
>>>>> - "OC4REF"
>>>>> + "OC4REF",
>>>>> + /* Master mode selection 2 only */
>>>>> + "OC5REF",
>>>>> + "OC6REF",
>>>>> + "compare_pulse_OC4REF",
>>>>> + "compare_pulse_OC6REF",
>>>>> + "compare_pulse_OC4REF_r_or_OC6REF_r",
>>>>> + "compare_pulse_OC4REF_r_or_OC6REF_f",
>>>>> + "compare_pulse_OC5REF_r_or_OC6REF_r",
>>>>> + "compare_pulse_OC5REF_r_or_OC6REF_f",
>>>>> };
>>>>>
>>>>> static ssize_t stm32_tt_show_master_mode(struct device *dev,
>>>>> @@ -199,10 +223,15 @@ static ssize_t stm32_tt_show_master_mode(struct device *dev,
>>>>> char *buf)
>>>>> {
>>>>> struct stm32_timer_trigger *priv = dev_get_drvdata(dev);
>>>>> + struct iio_trigger *trig = to_iio_trigger(dev);
>>>>> u32 cr2;
>>>>>
>>>>> regmap_read(priv->regmap, TIM_CR2, &cr2);
>>>>> - cr2 = (cr2 & TIM_CR2_MMS) >> TIM_CR2_MMS_SHIFT;
>>>>> +
>>>>> + if (stm32_timer_is_trgo2_name(trig->name))
>>>>> + cr2 = (cr2 & TIM_CR2_MMS2) >> TIM_CR2_MMS2_SHIFT;
>>>>> + else
>>>>> + cr2 = (cr2 & TIM_CR2_MMS) >> TIM_CR2_MMS_SHIFT;
>>>>>
>>>>> return snprintf(buf, PAGE_SIZE, "%s\n", master_mode_table[cr2]);
>>>>> }
>>>>> @@ -212,13 +241,25 @@ static ssize_t stm32_tt_store_master_mode(struct device *dev,
>>>>> const char *buf, size_t len)
>>>>> {
>>>>> struct stm32_timer_trigger *priv = dev_get_drvdata(dev);
>>>>> + struct iio_trigger *trig = to_iio_trigger(dev);
>>>>> + u32 mask, shift, master_mode_max;
>>>>> int i;
>>>>>
>>>>> - for (i = 0; i < ARRAY_SIZE(master_mode_table); i++) {
>>>>> + if (stm32_timer_is_trgo2_name(trig->name)) {
>>>>> + mask = TIM_CR2_MMS2;
>>>>> + shift = TIM_CR2_MMS2_SHIFT;
>>>>> + master_mode_max = MASTER_MODE2_MAX;
>>>>> + } else {
>>>>> + mask = TIM_CR2_MMS;
>>>>> + shift = TIM_CR2_MMS_SHIFT;
>>>>> + master_mode_max = MASTER_MODE_MAX;
>>>>> + }
>>>>> +
>>>>> + for (i = 0; i <= master_mode_max; i++) {
>>>>> if (!strncmp(master_mode_table[i], buf,
>>>>> strlen(master_mode_table[i]))) {
>>>>> - regmap_update_bits(priv->regmap, TIM_CR2,
>>>>> - TIM_CR2_MMS, i << TIM_CR2_MMS_SHIFT);
>>>>> + regmap_update_bits(priv->regmap, TIM_CR2, mask,
>>>>> + i << shift);
>>>>> /* Make sure that registers are updated */
>>>>> regmap_update_bits(priv->regmap, TIM_EGR,
>>>>> TIM_EGR_UG, TIM_EGR_UG);
>>>>> @@ -229,8 +270,31 @@ static ssize_t stm32_tt_store_master_mode(struct device *dev,
>>>>> return -EINVAL;
>>>>> }
>>>>>
>>>>> -static IIO_CONST_ATTR(master_mode_available,
>>>>> - "reset enable update compare_pulse OC1REF OC2REF OC3REF OC4REF");
>>>>> +static ssize_t stm32_tt_show_master_mode_avail(struct device *dev,
>>>>> + struct device_attribute *attr,
>>>>> + char *buf)
>>>>> +{
>>>>> + struct iio_trigger *trig = to_iio_trigger(dev);
>>>>> + unsigned int i, master_mode_max;
>>>>> + size_t len = 0;
>>>>> +
>>>>> + if (stm32_timer_is_trgo2_name(trig->name))
>>>>> + master_mode_max = MASTER_MODE2_MAX;
>>>>> + else
>>>>> + master_mode_max = MASTER_MODE_MAX;
>>>>> +
>>>>> + for (i = 0; i <= master_mode_max; i++)
>>>>> + len += scnprintf(buf + len, PAGE_SIZE - len,
>>>>> + "%s ", master_mode_table[i]);
>>>>> +
>>>>> + /* replace trailing space by newline */
>>>>> + buf[len - 1] = '\n';
>>>>> +
>>>>> + return len;
>>>>> +}
>>>>> +
>>>>> +static IIO_DEVICE_ATTR(master_mode_available, 0444,
>>>>> + stm32_tt_show_master_mode_avail, NULL, 0);
>>>>>
>>>>> static IIO_DEVICE_ATTR(master_mode, 0660,
>>>>> stm32_tt_show_master_mode,
>>>>> @@ -240,7 +304,7 @@ static IIO_DEVICE_ATTR(master_mode, 0660,
>>>>> static struct attribute *stm32_trigger_attrs[] = {
>>>>> &iio_dev_attr_sampling_frequency.dev_attr.attr,
>>>>> &iio_dev_attr_master_mode.dev_attr.attr,
>>>>> - &iio_const_attr_master_mode_available.dev_attr.attr,
>>>>> + &iio_dev_attr_master_mode_available.dev_attr.attr,
>>>>> NULL,
>>>>> };
>>>>>
>>>>> @@ -264,6 +328,12 @@ static int stm32_setup_iio_triggers(struct stm32_timer_trigger *priv)
>>>>>
>>>>> while (cur && *cur) {
>>>>> struct iio_trigger *trig;
>>>>> + bool cur_is_trgo2 = stm32_timer_is_trgo2_name(*cur);
>>>>> +
>>>>> + if (cur_is_trgo2 && !priv->has_trgo2) {
>>>>> + cur++;
>>>>> + continue;
>>>>> + }
>>>>>
>>>>> trig = devm_iio_trigger_alloc(priv->dev, "%s", *cur);
>>>>> if (!trig)
>>>>> @@ -277,7 +347,7 @@ static int stm32_setup_iio_triggers(struct stm32_timer_trigger *priv)
>>>>> * should only be available on trgo trigger which
>>>>> * is always the first in the list.
>>>>> */
>>>>> - if (cur == priv->triggers)
>>>>> + if (cur == priv->triggers || cur_is_trgo2)
>>>>> trig->dev.groups = stm32_trigger_attr_groups;
>>>>>
>>>>> iio_trigger_set_drvdata(trig, priv);
>>>>> @@ -584,6 +654,20 @@ bool is_stm32_timer_trigger(struct iio_trigger *trig)
>>>>> }
>>>>> EXPORT_SYMBOL(is_stm32_timer_trigger);
>>>>>
>>>>> +static void stm32_timer_detect_trgo2(struct stm32_timer_trigger *priv)
>>>>> +{
>>>>> + u32 val;
>>>>> +
>>>>> + /*
>>>>> + * Master mode selection 2 bits can only be written and read back when
>>>>> + * timer supports it.
>>>>> + */
>>>>> + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, TIM_CR2_MMS2);
>>>>> + regmap_read(priv->regmap, TIM_CR2, &val);
>>>>> + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, 0);
>>>>> + priv->has_trgo2 = !!val;
>>>>> +}
>>>>> +
>>>>> static int stm32_timer_trigger_probe(struct platform_device *pdev)
>>>>> {
>>>>> struct device *dev = &pdev->dev;
>>>>> @@ -614,6 +698,7 @@ static int stm32_timer_trigger_probe(struct platform_device *pdev)
>>>>> priv->max_arr = ddata->max_arr;
>>>>> priv->triggers = triggers_table[index];
>>>>> priv->valids = valids_table[index];
>>>>> + stm32_timer_detect_trgo2(priv);
>>>>>
>>>>> ret = stm32_setup_iio_triggers(priv);
>>>>> if (ret)
>>>>> diff --git a/include/linux/iio/timer/stm32-timer-trigger.h b/include/linux/iio/timer/stm32-timer-trigger.h
>>>>> index 55535ae..fa7d786 100644
>>>>> --- a/include/linux/iio/timer/stm32-timer-trigger.h
>>>>> +++ b/include/linux/iio/timer/stm32-timer-trigger.h
>>>>> @@ -10,6 +10,7 @@
>>>>> #define _STM32_TIMER_TRIGGER_H_
>>>>>
>>>>> #define TIM1_TRGO "tim1_trgo"
>>>>> +#define TIM1_TRGO2 "tim1_trgo2"
>>>>> #define TIM1_CH1 "tim1_ch1"
>>>>> #define TIM1_CH2 "tim1_ch2"
>>>>> #define TIM1_CH3 "tim1_ch3"
>>>>> @@ -44,6 +45,7 @@
>>>>> #define TIM7_TRGO "tim7_trgo"
>>>>>
>>>>> #define TIM8_TRGO "tim8_trgo"
>>>>> +#define TIM8_TRGO2 "tim8_trgo2"
>>>>> #define TIM8_CH1 "tim8_ch1"
>>>>> #define TIM8_CH2 "tim8_ch2"
>>>>> #define TIM8_CH3 "tim8_ch3"
>>>>> diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h
>>>>> index 4a0abbc..ce7346e 100644
>>>>> --- a/include/linux/mfd/stm32-timers.h
>>>>> +++ b/include/linux/mfd/stm32-timers.h
>>>>> @@ -34,6 +34,7 @@
>>>>> #define TIM_CR1_DIR BIT(4) /* Counter Direction */
>>>>> #define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */
>>>>> #define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */
>>>>> +#define TIM_CR2_MMS2 GENMASK(23, 20) /* Master mode selection 2 */
>>>>> #define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */
>>>>> #define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */
>>>>> #define TIM_DIER_UIE BIT(0) /* Update interrupt */
>>>>> @@ -60,6 +61,7 @@
>>>>>
>>>>> #define MAX_TIM_PSC 0xFFFF
>>>>> #define TIM_CR2_MMS_SHIFT 4
>>>>> +#define TIM_CR2_MMS2_SHIFT 20
>>>>> #define TIM_SMCR_TS_SHIFT 4
>>>>> #define TIM_BDTR_BKF_MASK 0xF
>>>>> #define TIM_BDTR_BKF_SHIFT 16
>>>>> --
>>>>> 1.9.1
>>>>>
>>>>
>>>> Acked-by: Benjamin Gaiganrd <benjamin.gaignard@...aro.org>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>>>> the body of a message to majordomo@...r.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
Powered by blists - more mailing lists