linux-kernel - [PATCH v2] Added "Preserve Boot Time Support"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 3 May 2017 13:59:38 +0300
From:   Bogdan Mirea <Bogdan-Stefan_mirea@...tor.com>
To:     <linux-kernel@...r.kernel.org>, <john.stultz@...aro.org>,
        <tglx@...utronix.de>
CC:     Bogdan Mirea <Bogdan-Stefan_mirea@...tor.com>
Subject: [PATCH v2] Added "Preserve Boot Time Support"

This option enables Boot Time Preservation between Bootloader and
Linux Kernel. It is based on the idea that the Bootloader (or any
other early firmware) will start the HW Timer and Linux Kernel will
count the time starting with the cycles elapsed since timer start.

The sched_clock part is preserving boottime for kmsg which should be in
sync with system uptime. The system uptime part is driver specific and I
updated the arm_arch_timer with an arch_timer_setsystime() function
which will call do_settimeofday64() with the values read from arch timer
counter.

This way both kmsg and uptime will be in sync, otherwise incosistencies
will appear between the two.

Signed-off-by: Bogdan Mirea <Bogdan-Stefan_mirea@...tor.com>
---
 drivers/clocksource/arm_arch_timer.c | 26 ++++++++++++++++++++++++++
 kernel/time/Kconfig                  |  8 ++++++++
 kernel/time/sched_clock.c            |  6 ++++++
 3 files changed, 40 insertions(+)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 5152b38..7f9bf2a 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -475,6 +475,28 @@ struct timecounter *arch_timer_get_timecounter(void)
 	return &timecounter;
 }
 
+#ifdef CONFIG_BOOT_TIME_PRESERVE
+/*
+ * Set the real system time(including the time spent in bootloader)
+ * based on the timer counter.
+ */
+void arch_timer_setsystime(void)
+{
+	static struct timespec64 boot_ts;
+	static cycles_t cycles;
+	unsigned long long nsecs;
+
+	cycles = arch_timer_read_counter() ? arch_timer_read_counter() : 0;
+
+	nsecs = clocksource_cyc2ns(cycles, clocksource_counter.mult,
+				   clocksource_counter.shift);
+	timespec64_add_ns(&boot_ts, nsecs);
+
+	if (do_settimeofday64(&boot_ts))
+		pr_warn("arch_timer: unable to set systime\n");
+}
+#endif /* CONFIG_BOOT_TIME_PRESERVE */
+
 static void __init arch_counter_register(unsigned type)
 {
 	u64 start_count;
@@ -504,6 +526,10 @@ static void __init arch_counter_register(unsigned type)
 
 	/* 56 bits minimum, so we assume worst case rollover */
 	sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
+#ifdef CONFIG_BOOT_TIME_PRESERVE
+	/* Set systime */
+	arch_timer_setsystime();
+#endif /* CONFIG_BOOT_TIME_PRESERVE */
 }
 
 static void arch_timer_stop(struct clock_event_device *clk)
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index 4008d9f..7d70232 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -193,5 +193,13 @@ config HIGH_RES_TIMERS
 	  hardware is not capable then this option only increases
 	  the size of the kernel image.
 
+config BOOT_TIME_PRESERVE
+	bool "Preserve Boot Time Support"
+	help
+	  This option enables Boot Time Preservation between Bootloader and
+	  Linux Kernel. It is based on the idea that the Bootloader (or any
+	  other early firmware) will start the HW Timer and Linux Kernel will
+	  count the time starting with the cycles elapsed since timer start.
+
 endmenu
 endif
diff --git a/kernel/time/sched_clock.c b/kernel/time/sched_clock.c
index a26036d..1d6e35a 100644
--- a/kernel/time/sched_clock.c
+++ b/kernel/time/sched_clock.c
@@ -193,7 +193,13 @@ sched_clock_register(u64 (*read)(void), int bits, unsigned long rate)
 	/* Update epoch for new counter and update 'epoch_ns' from old counter*/
 	new_epoch = read();
 	cyc = cd.actual_read_sched_clock();
+
+#ifdef CONFIG_BOOT_TIME_PRESERVE
+	ns = rd.epoch_ns + cyc_to_ns((new_epoch - rd.epoch_cyc) & new_mask, new_mult, new_shift);
+#else
 	ns = rd.epoch_ns + cyc_to_ns((cyc - rd.epoch_cyc) & rd.sched_clock_mask, rd.mult, rd.shift);
+#endif /* CONFIG_BOOT_TIME_PRESERVE */
+
 	cd.actual_read_sched_clock = read;
 
 	rd.read_sched_clock	= read;
-- 
1.9.1