[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1493900000-26220-1-git-send-email-eugen.hristev@microchip.com>
Date: Thu, 4 May 2017 15:13:17 +0300
From: Eugen Hristev <eugen.hristev@...rochip.com>
To: <nicolas.ferre@...rochip.com>, <jic23@...nel.org>,
<alexandre.belloni@...e-electrons.com>,
<linux-iio@...r.kernel.org>, <lars@...afoo.de>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <ludovic.desroches@...rochip.com>, <eugen.hristev@...rochip.com>
Subject: [PATCH v2 0/3] iio: adc: sama5d2_adc hw triggers and buffers
This patch implements the hardware triggers support and buffer management
for sama5d2.
The DT modifications ( [PATCH 1/3] ARM: dts: at91: sama5d2_xplained:
enable ADTRG pin) are for demonstration purposes of the feature,
setting the pinctrl for the ADC hw trigger pin,should go through
at91 maintainers.
I also increased the buffer size for the trigger name in the
generic_buffer application to cope with longer names and avoid
stack smashing problem.
This is in patch [PATCH 3/3] iio: tools: generic_buffer: increase trigger length
Changes in v2:
- Moved buffer allocation and freeing into the preenable and postdisable
callbacks.
We have a total of scan bytes that can vary a lot depending on each channel
enabled at a certain point.
- made the at91 trigger list part of state structure
- made the iio trigger list preallocated in state structure
- moved irq enabling/disabling into the try_reenable callback
- on trigger disable must write disable registries as well
- Modified trigger name length to 64
Eugen Hristev (3):
ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
iio: adc: at91-sama5d2_adc: add hw trigger and buffer support
iio: tools: generic_buffer: increase trigger length
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 16 +-
drivers/iio/adc/at91-sama5d2_adc.c | 231 +++++++++++++++++++++++++++-
tools/iio/iio_utils.h | 2 +-
3 files changed, 244 insertions(+), 5 deletions(-)
--
2.7.4
Powered by blists - more mailing lists