| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170504125055.uvcl4ov4bxzis4um@lukather>
Date: Thu, 4 May 2017 14:50:55 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Icenowy Zheng <icenowy@...c.io>
Cc: Rob Herring <robh+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH v6 02/13] clk: sunxi-ng: add support for DE2 CCU
On Thu, May 04, 2017 at 07:48:47PM +0800, Icenowy Zheng wrote:
> The "Display Engine 2.0" in Allwinner newer SoCs contains a clock
> management unit for its subunits, like the DE CCU in A80.
>
> Add a sunxi-ng style driver for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> ---
> Changes in v5:
> - Removed dt-bindings headers (they're now in patch 1).
> Changes in v4:
> - Fixed the inconsistence between mixer_div clocks' number and real clock.
> Changes in v2:
> - Rename sunxi-de2-ccu to sun8i-de2-ccu.
>
> drivers/clk/sunxi-ng/Kconfig | 5 +
> drivers/clk/sunxi-ng/Makefile | 1 +
> drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 218 +++++++++++++++++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu-sun8i-de2.h | 28 +++++
> 4 files changed, 252 insertions(+)
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-de2.h
>
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
> index 64088e599404..2e4d804fbf61 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -140,6 +140,11 @@ config SUN8I_V3S_CCU
> default MACH_SUN8I
> depends on MACH_SUN8I || COMPILE_TEST
>
> +config SUN8I_DE2_CCU
> + bool "Support for the Allwinner SoCs DE2 CCU"
> + select SUNXI_CCU_DIV
> + select SUNXI_CCU_GATE
> +
> config SUN9I_A80_CCU
> bool "Support for the Allwinner A80 CCU"
> select SUNXI_CCU_DIV
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index 0ec02fe14c50..be616279450e 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
> obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
> obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
> obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
> +obj-$(CONFIG_SUN8I_DE2_CCU) += ccu-sun8i-de2.o
> obj-$(CONFIG_SUN8I_R_CCU) += ccu-sun8i-r.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> new file mode 100644
> index 000000000000..adb2c344692a
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> @@ -0,0 +1,218 @@
> +/*
> + * Copyright (c) 2017 Icenowy Zheng <icenowy@...c.io>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu-sun8i-de2.h"
> +
> +static SUNXI_CCU_GATE(bus_mixer0_clk, "bus-mixer0", "bus-de",
> + 0x04, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_mixer1_clk, "bus-mixer1", "bus-de",
> + 0x04, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_wb_clk, "bus-wb", "bus-de",
> + 0x04, BIT(2), 0);
> +
> +static SUNXI_CCU_GATE(mixer0_clk, "mixer0", "mixer0-div",
> + 0x00, BIT(0), CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_GATE(mixer1_clk, "mixer1", "mixer1-div",
> + 0x00, BIT(1), CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_GATE(wb_clk, "wb", "wb-div",
> + 0x00, BIT(2), CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
> + CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div", "de", 0x0c, 4, 4,
> + CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
> + CLK_SET_RATE_PARENT);
> +
> +static struct ccu_common *sunxi_de2_clks[] = {
> + &mixer0_clk.common,
> + &mixer1_clk.common,
> + &wb_clk.common,
> +
> + &bus_mixer0_clk.common,
> + &bus_mixer1_clk.common,
> + &bus_wb_clk.common,
> +
> + &mixer0_div_clk.common,
> + &mixer1_div_clk.common,
> + &wb_div_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sunxi_de2_hw_clks = {
> + .hws = {
> + [CLK_MIXER0] = &mixer0_clk.common.hw,
> + [CLK_MIXER1] = &mixer1_clk.common.hw,
> + [CLK_WB] = &wb_clk.common.hw,
> +
> + [CLK_BUS_MIXER0] = &bus_mixer0_clk.common.hw,
> + [CLK_BUS_MIXER1] = &bus_mixer1_clk.common.hw,
> + [CLK_BUS_WB] = &bus_wb_clk.common.hw,
> +
> + [CLK_MIXER0_DIV] = &mixer0_div_clk.common.hw,
> + [CLK_MIXER1_DIV] = &mixer1_div_clk.common.hw,
> + [CLK_WB_DIV] = &wb_div_clk.common.hw,
> + },
> + .num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
> + [RST_MIXER0] = { 0x08, BIT(0) },
> + /*
> + * For A83T, H3 and R40, mixer1 reset line is shared with wb, so
> + * only RST_WB is exported here.
> + */
> + [RST_WB] = { 0x08, BIT(2) },
> +};
> +
> +static struct ccu_reset_map sun50i_a64_de2_resets[] = {
> + [RST_MIXER0] = { 0x08, BIT(0) },
> + [RST_MIXER1] = { 0x08, BIT(1) },
> + [RST_WB] = { 0x08, BIT(2) },
> +};
> +
> +static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
> + .ccu_clks = sunxi_de2_clks,
> + .num_ccu_clks = ARRAY_SIZE(sunxi_de2_clks),
> +
> + .hw_clks = &sunxi_de2_hw_clks,
> +
> + .resets = sun8i_a83t_de2_resets,
> + .num_resets = ARRAY_SIZE(sun8i_a83t_de2_resets),
> +};
> +
> +static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
> + .ccu_clks = sunxi_de2_clks,
> + .num_ccu_clks = ARRAY_SIZE(sunxi_de2_clks),
> +
> + .hw_clks = &sunxi_de2_hw_clks,
> +
> + .resets = sun50i_a64_de2_resets,
> + .num_resets = ARRAY_SIZE(sun50i_a64_de2_resets),
> +};
> +
> +static int sunxi_de2_clk_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + struct clk *bus_clk, *mod_clk;
> + struct reset_control *rstc;
> + void __iomem *reg;
> + const struct sunxi_ccu_desc *ccu_desc;
> + int ret;
> +
> + ccu_desc = of_device_get_match_data(&pdev->dev);
> + if (!ccu_desc)
> + return -EINVAL;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + reg = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(reg))
> + return PTR_ERR(reg);
> +
> + bus_clk = devm_clk_get(&pdev->dev, "bus");
> + if (IS_ERR(bus_clk)) {
> + ret = PTR_ERR(bus_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
> + return ret;
> + }
> +
> + mod_clk = devm_clk_get(&pdev->dev, "mod");
> + if (IS_ERR(mod_clk)) {
> + ret = PTR_ERR(mod_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Couldn't get mod clk: %d\n", ret);
> + return ret;
> + }
> +
> + rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> + if (IS_ERR(rstc)) {
> + ret = PTR_ERR(bus_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev,
> + "Couldn't get reset control: %d\n", ret);
> + return ret;
> + }
> +
> + /* The clocks need to be enabled for us to access the registers */
> + ret = clk_prepare_enable(bus_clk);
> + if (ret) {
> + dev_err(&pdev->dev, "Couldn't enable bus clk: %d\n", ret);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(mod_clk);
> + if (ret) {
> + dev_err(&pdev->dev, "Couldn't enable mod clk: %d\n", ret);
> + return ret;
You're leaving the bus clock enabled here if it fails.
> + }
> +
> + /* The reset control needs to be asserted for the controls to work */
> + ret = reset_control_deassert(rstc);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Couldn't deassert reset control: %d\n", ret);
> + goto err_disable_clk;
> + }
> +
> + ret = sunxi_ccu_probe(pdev->dev.of_node, reg, ccu_desc);
> + if (ret)
> + goto err_assert_reset;
> +
> + return 0;
> +
> +err_assert_reset:
> + reset_control_assert(rstc);
And here you're leaving the mod_clk enabled
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists