[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c66ca9c8-2a9f-8938-7a70-7f9dfe763457@nxp.com>
Date: Thu, 4 May 2017 19:13:16 +0000
From: Han Xu <han.xu@....com>
To: Stefan Agner <stefan@...er.ch>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"computersforpeace@...il.com" <computersforpeace@...il.com>,
"boris.brezillon@...e-electrons.com"
<boris.brezillon@...e-electrons.com>,
"marek.vasut@...il.com" <marek.vasut@...il.com>,
"richard@....at" <richard@....at>,
"cyrille.pitchen@...el.com" <cyrille.pitchen@...el.com>
CC: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"fabio.estevam@...escale.com" <fabio.estevam@...escale.com>,
"LW@...O-electronics.de" <LW@...O-electronics.de>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 4/5] ARM: dts: imx7: add GPMI NAND
On 04/21/2017 08:23 PM, Stefan Agner wrote:
> Add i.MX 7 GPMI NAND module.
>
> Signed-off-by: Stefan Agner <stefan@...er.ch>
> ---
> arch/arm/boot/dts/imx7s.dtsi | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index 843eb379e1ea..9645257638d4 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -995,5 +995,36 @@
> status = "disabled";
> };
> };
> +
> + dma_apbh: dma-apbh@...00000 {
> + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
> + reg = <0x33000000 0x2000>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
> + #dma-cells = <1>;
> + dma-channels = <4>;
> + clocks = <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
> + <&clks IMX7D_NAND_ROOT_CLK>;
> + clock-names = "dma_apbh_bch", "dma_apbh_io";
> + };
Do you need some patches to enable all clks for APBH DMA? Refer to
https://patchwork.ozlabs.org/patch/551967/
> +
> + gpmi: gpmi-nand@...02000{
> + compatible = "fsl,imx7d-gpmi-nand";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
> + reg-names = "gpmi-nand", "bch";
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "bch";
> + clocks = <&clks IMX7D_NAND_ROOT_CLK>,
> + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>;
> + clock-names = "gpmi_io", "gpmi_bch_apb";
> + dmas = <&dma_apbh 0>;
> + dma-names = "rx-tx";
> + status = "disabled";
> + };
> };
> };
Powered by blists - more mailing lists