[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <194c7da3-f674-e024-ba59-8b353c3f089b@kernel.org>
Date: Sun, 7 May 2017 14:49:16 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Benjamin Gaignard <benjamin.gaignard@...aro.org>,
linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org,
knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
vilhelm.gray@...il.com, mwelling@...e.org
Cc: fabrice.gasnier@...com, linaro-kernel@...ts.linaro.org,
Benjamin Gaignard <benjamin.gaignard@...com>
Subject: Re: [PATCH 2/2] iio: make stm32 trigger driver use
INDIO_HARDWARE_TRIGGERED mode
On 01/05/17 01:50, Jonathan Cameron wrote:
> On 27/04/17 14:29, Benjamin Gaignard wrote:
>> Add validate function to be use to use the correct trigger.
>> Add an attribute to configure device mode like for quadrature and
>> enable modes
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...com>
> Hmm. I think I quite like this as an approach but have changed my
> mind several times over the last few days :)
>
> Hence I'd ideally like some more opinions and will be leaving it
> on the list for at least a short time longer.
>
> It's missed the current merge window anyway so plenty of time to
> tick off this last element of your support.
>
> I also just checked and our docs for the existing modes is rubbish
> (or I can't find it with a quick grep ;)
> so we should tidy that up and add some description of this as well.
Still looking for more input on this!
Lars - do you have time for a quick look?
No real rush though as we are early in the cycle.
Thanks,
Jonathan
>
> Jonathan
>> ---
>> .../ABI/testing/sysfs-bus-iio-timer-stm32 | 15 ++++++
>> drivers/iio/trigger/stm32-timer-trigger.c | 61 ++++++++++++++++++++++
>> 2 files changed, 76 insertions(+)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
>> index 230020e..cccdf57 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
>> @@ -90,3 +90,18 @@ Description:
>> Counting is enabled on rising edge of the connected
>> trigger, and remains enabled for the duration of this
>> selected mode.
>> +
>> +What: /sys/bus/iio/devices/iio:deviceX/in_count_trigger_mode_available
>> +KernelVersion: 4.13
>> +Contact: benjamin.gaignard@...com
>> +Description:
>> + Reading returns the list possible trigger modes.
>> +
>> +What: /sys/bus/iio/devices/iio:deviceX/in_count0_trigger_mode
>> +KernelVersion: 4.13
>> +Contact: benjamin.gaignard@...com
>> +Description:
>> + Configure the device counter trigger mode
>> + counting direction is set by in_count0_count_direction
>> + attribute and the counter is clocked by the connected trigger
>> + rising edges.
>> diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
>> index 0f1a2cf..7c6e90e 100644
>> --- a/drivers/iio/trigger/stm32-timer-trigger.c
>> +++ b/drivers/iio/trigger/stm32-timer-trigger.c
>> @@ -347,12 +347,70 @@ static int stm32_counter_write_raw(struct iio_dev *indio_dev,
>> return -EINVAL;
>> }
>>
>> +static int stm32_counter_validate_trigger(struct iio_dev *indio_dev,
>> + struct iio_trigger *trig)
>> +{
>> + struct stm32_timer_trigger *priv = iio_priv(indio_dev);
>> + const char * const *cur = priv->valids;
>> + unsigned int i = 0;
>> +
>> + if (!is_stm32_timer_trigger(trig))
>> + return -EINVAL;
>> +
>> + while (cur && *cur) {
>> + if (!strncmp(trig->name, *cur, strlen(trig->name))) {
>> + regmap_update_bits(priv->regmap,
>> + TIM_SMCR, TIM_SMCR_TS,
>> + i << TIM_SMCR_TS_SHIFT);
>> + return 0;
>> + }
>> + cur++;
>> + i++;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> static const struct iio_info stm32_trigger_info = {
>> .driver_module = THIS_MODULE,
>> + .validate_trigger = stm32_counter_validate_trigger,
>> .read_raw = stm32_counter_read_raw,
>> .write_raw = stm32_counter_write_raw
>> };
>>
>> +static const char *const stm32_trigger_modes[] = {
>> + "trigger",
>> +};
>> +
>> +static int stm32_set_trigger_mode(struct iio_dev *indio_dev,
>> + const struct iio_chan_spec *chan,
>> + unsigned int mode)
>> +{
>> + struct stm32_timer_trigger *priv = iio_priv(indio_dev);
>> +
>> + regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, TIM_SMCR_SMS);
>> +
>> + return 0;
>> +}
>> +
>> +static int stm32_get_trigger_mode(struct iio_dev *indio_dev,
>> + const struct iio_chan_spec *chan)
>> +{
>> + struct stm32_timer_trigger *priv = iio_priv(indio_dev);
>> + u32 smcr;
>> +
>> + regmap_read(priv->regmap, TIM_SMCR, &smcr);
>> +
>> + return smcr == TIM_SMCR_SMS ? 0 : -EINVAL;
>> +}
>> +
>> +static const struct iio_enum stm32_trigger_mode_enum = {
>> + .items = stm32_trigger_modes,
>> + .num_items = ARRAY_SIZE(stm32_trigger_modes),
>> + .set = stm32_set_trigger_mode,
>> + .get = stm32_get_trigger_mode
>> +};
>> +
>> static const char *const stm32_enable_modes[] = {
>> "always",
>> "gated",
>> @@ -536,6 +594,8 @@ static ssize_t stm32_count_set_preset(struct iio_dev *indio_dev,
>> IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_quadrature_mode_enum),
>> IIO_ENUM("enable_mode", IIO_SEPARATE, &stm32_enable_mode_enum),
>> IIO_ENUM_AVAILABLE("enable_mode", &stm32_enable_mode_enum),
>> + IIO_ENUM("trigger_mode", IIO_SEPARATE, &stm32_trigger_mode_enum),
>> + IIO_ENUM_AVAILABLE("trigger_mode", &stm32_trigger_mode_enum),
>> {}
>> };
>>
>> @@ -560,6 +620,7 @@ static struct stm32_timer_trigger *stm32_setup_counter_device(struct device *dev
>> indio_dev->name = dev_name(dev);
>> indio_dev->dev.parent = dev;
>> indio_dev->info = &stm32_trigger_info;
>> + indio_dev->modes = INDIO_HARDWARE_TRIGGERED;
>> indio_dev->num_channels = 1;
>> indio_dev->channels = &stm32_trigger_channel;
>> indio_dev->dev.of_node = dev->of_node;
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Powered by blists - more mailing lists