[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1494262128.2322.22.camel@pengutronix.de>
Date: Mon, 08 May 2017 18:48:48 +0200
From: Lucas Stach <l.stach@...gutronix.de>
To: Peter Senna Tschudin <peter.senna@...labora.com>
Cc: Kishon Vijay Abraham I <kishon@...com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Jingoo Han <jingoohan1@...il.com>,
Richard Zhu <hongxing.zhu@....com>,
Murali Karicheri <m-karicheri2@...com>,
Minghuan Lian <minghuan.Lian@...escale.com>,
Mingkai Hu <mingkai.hu@...escale.com>,
Roy Zang <tie-fei.zang@...escale.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Niklas Cassel <niklas.cassel@...s.com>,
Jesper Nilsson <jesper.nilsson@...s.com>,
Joao Pinto <Joao.Pinto@...opsys.com>,
Zhou Wang <wangzhou1@...ilicon.com>,
Gabriele Paoloni <gabriele.paoloni@...wei.com>,
Stanimir Varbanov <svarbanov@...sol.com>,
Pratyush Anand <pratyush.anand@...il.com>,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: Regression: 442ec4c04d1: PCI: dwc: all: Split struct pcie_port
into host-only and core structures
Am Montag, den 08.05.2017, 18:44 +0200 schrieb Peter Senna Tschudin:
> On Mon, May 08, 2017 at 06:34:08PM +0200, Lucas Stach wrote:
> > Am Montag, den 08.05.2017, 17:02 +0200 schrieb Peter Senna Tschudin:
> > > Hello Kishon,
> > >
> > > Our iMX6 hardware (imx6q-b850v3.dts) is not booting with latest
> > > linux-next and I could bisect until:
> > >
> > > commit 442ec4c04d1235f8c664a74004dae54a7a574d18
> > > Author: Kishon Vijay Abraham I <kishon@...com>
> > > Date: Wed Feb 15 18:48:14 2017 +0530
> > >
> > > PCI: dwc: all: Split struct pcie_port into host-only and core structures
> > >
> > > Which seem to be causing our issues. Our device (imx6q-b850v3.dts) boots
> > > fine with 4.10, and also boots if we disable pcie with:
> >
> > Are you sure about this bisect? It seems more likely that the secondary
> > bus scanning goes wrong. It seems Lorenzo Pieralisi's cfg space
> > non-posting patches landed in next, so the root cause of this might just
> > be the driver hooking the wrong fault code now.
> >
> > Async and synchronous aborts are different fault codes on ARM. Can you
> > see of removing the "16 +" in hook_fault_code() in
> > drivers/pci/dwc/pci-imx6.c fixes this issue?
>
> changing it to:
>
> hook_fault_code(6, imx6q_pcie_abort_handler, SIGBUS, 0,
> "imprecise external abort");
>
> made no difference, problem persists...
Can you test if 8 or 10 works?
Regards,
Lucas
Powered by blists - more mailing lists