linux-kernel - [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170510084231.19302-6-peter.ujfalusi@ti.com>
Date:   Wed, 10 May 2017 11:42:27 +0300
From:   Peter Ujfalusi <peter.ujfalusi@...com>
To:     <b-liu@...com>, <tony@...mide.com>, <gregkh@...uxfoundation.org>,
        <vinod.koul@...el.com>
CC:     <linux-usb@...r.kernel.org>, <linux-omap@...r.kernel.org>,
        <balbi@...nel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size

We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
 drivers/usb/musb/tusb6010_omap.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index db2e4c379ccf..4e1a6e4a61b8 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -389,15 +389,19 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 
 	if (chdat->tx) {
 		/* Send transfer_packet_sz packets at a time */
-		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-			chdat->transfer_packet_sz);
+		u32 psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~0x7ff;
+		psize |= chdat->transfer_packet_sz;
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
 		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
 			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
 	} else {
 		/* Receive transfer_packet_sz packets at a time */
-		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-			chdat->transfer_packet_sz << 16);
+		u32 psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~(0x7ff << 16);
+		psize |= (chdat->transfer_packet_sz << 16);
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
 		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
 			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
-- 
2.12.2