| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <49df8cbd7204a5f145834715ab353f03f417e1f8.1494660546.git.jan.kiszka@siemens.com>
Date: Sat, 13 May 2017 09:29:05 +0200
From: Jan Kiszka <jan.kiszka@...mens.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-serial@...r.kernel.org, linux-gpio@...r.kernel.org,
Sudip Mukherjee <sudip.mukherjee@...ethink.co.uk>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Sascha Weisenberger <sascha.weisenberger@...mens.com>
Subject: [PATCH 7/8] gpio-exar/8250-exar: Make set of exported GPIOs configurable
On the SIMATIC, IOT2040 only a single pin is exportable as GPIO, the
rest is required to operate the UART. To allow modeling this case,
use device properties to specify a (consecutive) pin subset for
exporting by the gpio-exar driver.
Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
---
drivers/gpio/gpio-exar.c | 31 ++++++++++++++++++++++---------
drivers/tty/serial/8250/8250_exar.c | 16 ++++++++++++----
2 files changed, 34 insertions(+), 13 deletions(-)
diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index 98bd3eb1290e..e2cb1d83e4b0 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -31,6 +31,7 @@ struct exar_gpio_chip {
int index;
void __iomem *regs;
char name[20];
+ unsigned int first_gpio;
};
static void exar_update(struct gpio_chip *chip, unsigned int reg, int val,
@@ -51,9 +52,11 @@ static void exar_update(struct gpio_chip *chip, unsigned int reg, int val,
static int exar_set_direction(struct gpio_chip *chip, int direction,
unsigned int offset)
{
- unsigned int bank = offset / 8;
- unsigned int addr;
+ struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+ unsigned int bank, addr;
+ offset += exar_gpio->first_gpio;
+ bank = offset / 8;
addr = bank ? EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
exar_update(chip, addr, direction, offset % 8);
return 0;
@@ -73,10 +76,12 @@ static int exar_get(struct gpio_chip *chip, unsigned int reg)
static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
{
- unsigned int bank = offset / 8;
- unsigned int addr;
+ struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+ unsigned int bank, addr;
int val;
+ offset += exar_gpio->first_gpio;
+ bank = offset / 8;
addr = bank ? EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
val = exar_get(chip, addr) >> (offset % 8);
@@ -85,10 +90,12 @@ static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
{
- unsigned int bank = offset / 8;
- unsigned int addr;
+ struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+ unsigned int bank, addr;
int val;
+ offset += exar_gpio->first_gpio;
+ bank = offset / 8;
addr = bank ? EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
val = exar_get(chip, addr) >> (offset % 8);
@@ -98,9 +105,11 @@ static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
static void exar_set_value(struct gpio_chip *chip, unsigned int offset,
int value)
{
- unsigned int bank = offset / 8;
- unsigned int addr;
+ struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+ unsigned int bank, addr;
+ offset += exar_gpio->first_gpio;
+ bank = offset / 8;
addr = bank ? EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
exar_update(chip, addr, value, offset % 8);
}
@@ -123,6 +132,7 @@ static int gpio_exar_probe(struct platform_device *pdev)
struct exar_gpio_chip *exar_gpio;
void __iomem *p;
int index, ret;
+ u32 val;
if (pcidev->vendor != PCI_VENDOR_ID_EXAR)
return -ENODEV;
@@ -152,9 +162,12 @@ static int gpio_exar_probe(struct platform_device *pdev)
exar_gpio->gpio_chip.get = exar_get_value;
exar_gpio->gpio_chip.set = exar_set_value;
exar_gpio->gpio_chip.base = -1;
- exar_gpio->gpio_chip.ngpio = 16;
+ device_property_read_u32(&pdev->dev, "ngpio", &val);
+ exar_gpio->gpio_chip.ngpio = val;
exar_gpio->regs = p;
exar_gpio->index = index;
+ device_property_read_u32(&pdev->dev, "first_gpio", &val);
+ exar_gpio->first_gpio = val;
ret = devm_gpiochip_add_data(&pdev->dev,
&exar_gpio->gpio_chip, exar_gpio);
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 2d056d1eeca3..8e9c0e9495f5 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -19,6 +19,7 @@
#include <linux/string.h>
#include <linux/tty.h>
#include <linux/8250_pci.h>
+#include <linux/property.h>
#include <asm/byteorder.h>
@@ -188,8 +189,14 @@ static void setup_gpio(u8 __iomem *p)
}
static void *
-xr17v35x_register_gpio(struct pci_dev *pcidev)
+xr17v35x_register_gpio(struct pci_dev *pcidev, unsigned int first_gpio,
+ unsigned int ngpio)
{
+ struct property_entry properties[] = {
+ PROPERTY_ENTRY_U32("first_gpio", first_gpio),
+ PROPERTY_ENTRY_U32("ngpio", ngpio),
+ { }
+ };
struct platform_device *pdev;
pdev = platform_device_alloc("gpio_exar", PLATFORM_DEVID_AUTO);
@@ -197,10 +204,11 @@ xr17v35x_register_gpio(struct pci_dev *pcidev)
return NULL;
/*
- * platform_device_add_data kmemdups the data, therefore we can safely
- * pass a stack reference.
+ * platform_device_add_data and platform_device_add_properties copy
+ * the data, therefore we can safely pass a stack references.
*/
if (platform_device_add_data(pdev, &pcidev, sizeof(pcidev)) < 0 ||
+ platform_device_add_properties(pdev, properties) < 0 ||
platform_device_add(pdev) < 0) {
platform_device_put(pdev);
return NULL;
@@ -242,7 +250,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
/* Setup Multipurpose Input/Output pins. */
setup_gpio(p);
- port->port.private_data = xr17v35x_register_gpio(pcidev);
+ port->port.private_data = xr17v35x_register_gpio(pcidev, 0, 16);
}
return 0;
--
2.12.0
Powered by blists - more mailing lists