| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1494791476-14599-10-git-send-email-peda@lysator.liu.se>
Date: Sun, 14 May 2017 21:51:12 +0200
From: Peter Rosin <peda@...ator.liu.se>
To: linux-kernel@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Peter Rosin <peda@...ntia.se>, Wolfram Sang <wsa@...-dreams.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Jonathan Corbet <corbet@....net>, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-iio@...r.kernel.org,
linux-doc@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
Colin Ian King <colin.king@...onical.com>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
Philipp Zabel <p.zabel@...gutronix.de>, kernel@...gutronix.de
Subject: [PATCH v15 09/13] i2c: i2c-mux-gpmux: new driver
From: Peter Rosin <peda@...ntia.se>
This is a general purpose i2c mux that uses a multiplexer controlled by
the multiplexer subsystem to do the muxing.
The user can select if the mux is to be mux-locked and parent-locked
as described in Documentation/i2c/i2c-topology.
Acked-by: Jonathan Cameron <jic23@...nel.org>
Acked-by: Wolfram Sang <wsa@...-dreams.de>
Signed-off-by: Peter Rosin <peda@...ntia.se>
---
drivers/i2c/muxes/Kconfig | 13 +++
drivers/i2c/muxes/Makefile | 1 +
drivers/i2c/muxes/i2c-mux-gpmux.c | 173 ++++++++++++++++++++++++++++++++++++++
3 files changed, 187 insertions(+)
create mode 100644 drivers/i2c/muxes/i2c-mux-gpmux.c
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 1e160fc37ecc..2c64d0e0740f 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -30,6 +30,19 @@ config I2C_MUX_GPIO
This driver can also be built as a module. If so, the module
will be called i2c-mux-gpio.
+config I2C_MUX_GPMUX
+ tristate "General Purpose I2C multiplexer"
+ select MULTIPLEXER
+ depends on OF || COMPILE_TEST
+ help
+ If you say yes to this option, support will be included for a
+ general purpose I2C multiplexer. This driver provides access to
+ I2C busses connected through a MUX, which in turn is controlled
+ by a MUX-controller from the MUX subsystem.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-gpmux.
+
config I2C_MUX_LTC4306
tristate "LTC LTC4306/5 I2C multiplexer"
select GPIOLIB
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
index ff7618cd5312..4a67d3199877 100644
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE) += i2c-arb-gpio-challenge.o
obj-$(CONFIG_I2C_DEMUX_PINCTRL) += i2c-demux-pinctrl.o
obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
+obj-$(CONFIG_I2C_MUX_GPMUX) += i2c-mux-gpmux.o
obj-$(CONFIG_I2C_MUX_LTC4306) += i2c-mux-ltc4306.o
obj-$(CONFIG_I2C_MUX_MLXCPLD) += i2c-mux-mlxcpld.o
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
diff --git a/drivers/i2c/muxes/i2c-mux-gpmux.c b/drivers/i2c/muxes/i2c-mux-gpmux.c
new file mode 100644
index 000000000000..92cf5f48afe6
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-gpmux.c
@@ -0,0 +1,173 @@
+/*
+ * General Purpose I2C multiplexer
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@...ntia.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+struct mux {
+ struct mux_control *control;
+
+ bool do_not_deselect;
+};
+
+static int i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
+{
+ struct mux *mux = i2c_mux_priv(muxc);
+ int ret;
+
+ ret = mux_control_select(mux->control, chan);
+ mux->do_not_deselect = ret < 0;
+
+ return ret;
+}
+
+static int i2c_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+ struct mux *mux = i2c_mux_priv(muxc);
+
+ if (mux->do_not_deselect)
+ return 0;
+
+ return mux_control_deselect(mux->control);
+}
+
+static struct i2c_adapter *mux_parent_adapter(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *parent_np;
+ struct i2c_adapter *parent;
+
+ parent_np = of_parse_phandle(np, "i2c-parent", 0);
+ if (!parent_np) {
+ dev_err(dev, "Cannot parse i2c-parent\n");
+ return ERR_PTR(-ENODEV);
+ }
+ parent = of_find_i2c_adapter_by_node(parent_np);
+ of_node_put(parent_np);
+ if (!parent)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return parent;
+}
+
+static const struct of_device_id i2c_mux_of_match[] = {
+ { .compatible = "i2c-mux", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_of_match);
+
+static int i2c_mux_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child;
+ struct i2c_mux_core *muxc;
+ struct mux *mux;
+ struct i2c_adapter *parent;
+ int children;
+ int ret;
+
+ if (!np)
+ return -ENODEV;
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
+ mux->control = devm_mux_control_get(dev, NULL);
+ if (IS_ERR(mux->control)) {
+ if (PTR_ERR(mux->control) != -EPROBE_DEFER)
+ dev_err(dev, "failed to get control-mux\n");
+ return PTR_ERR(mux->control);
+ }
+
+ parent = mux_parent_adapter(dev);
+ if (IS_ERR(parent)) {
+ if (PTR_ERR(parent) != -EPROBE_DEFER)
+ dev_err(dev, "failed to get i2c-parent adapter\n");
+ return PTR_ERR(parent);
+ }
+
+ children = of_get_child_count(np);
+
+ muxc = i2c_mux_alloc(parent, dev, children, 0, 0,
+ i2c_mux_select, i2c_mux_deselect);
+ if (!muxc) {
+ ret = -ENOMEM;
+ goto err_parent;
+ }
+ muxc->priv = mux;
+
+ platform_set_drvdata(pdev, muxc);
+
+ muxc->mux_locked = of_property_read_bool(np, "mux-locked");
+
+ for_each_child_of_node(np, child) {
+ u32 chan;
+
+ ret = of_property_read_u32(child, "reg", &chan);
+ if (ret < 0) {
+ dev_err(dev, "no reg property for node '%s'\n",
+ child->name);
+ goto err_children;
+ }
+
+ if (chan >= mux_control_states(mux->control)) {
+ dev_err(dev, "invalid reg %u\n", chan);
+ ret = -EINVAL;
+ goto err_children;
+ }
+
+ ret = i2c_mux_add_adapter(muxc, 0, chan, 0);
+ if (ret)
+ goto err_children;
+ }
+
+ dev_info(dev, "%d-port mux on %s adapter\n", children, parent->name);
+
+ return 0;
+
+err_children:
+ i2c_mux_del_adapters(muxc);
+err_parent:
+ i2c_put_adapter(parent);
+
+ return ret;
+}
+
+static int i2c_mux_remove(struct platform_device *pdev)
+{
+ struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+ i2c_mux_del_adapters(muxc);
+ i2c_put_adapter(muxc->parent);
+
+ return 0;
+}
+
+static struct platform_driver i2c_mux_driver = {
+ .probe = i2c_mux_probe,
+ .remove = i2c_mux_remove,
+ .driver = {
+ .name = "i2c-mux-gpmux",
+ .of_match_table = i2c_mux_of_match,
+ },
+};
+module_platform_driver(i2c_mux_driver);
+
+MODULE_DESCRIPTION("General Purpose I2C multiplexer driver");
+MODULE_AUTHOR("Peter Rosin <peda@...ntia.se>");
+MODULE_LICENSE("GPL v2");
--
2.1.4
Powered by blists - more mailing lists