[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1494791476-14599-7-git-send-email-peda@lysator.liu.se>
Date: Sun, 14 May 2017 21:51:09 +0200
From: Peter Rosin <peda@...ator.liu.se>
To: linux-kernel@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Peter Rosin <peda@...ntia.se>, Wolfram Sang <wsa@...-dreams.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Jonathan Corbet <corbet@....net>, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-iio@...r.kernel.org,
linux-doc@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
Colin Ian King <colin.king@...onical.com>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
Philipp Zabel <p.zabel@...gutronix.de>, kernel@...gutronix.de
Subject: [PATCH v15 06/13] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings
From: Peter Rosin <peda@...ntia.se>
Describe how a multiplexer can be used to select which signal is fed to
an io-channel.
Acked-by: Jonathan Cameron <jic23@...nel.org>
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Peter Rosin <peda@...ntia.se>
---
.../bindings/iio/multiplexer/io-channel-mux.txt | 39 ++++++++++++++++++++++
MAINTAINERS | 6 ++++
2 files changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
new file mode 100644
index 000000000000..c82794002595
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
@@ -0,0 +1,39 @@
+I/O channel multiplexer bindings
+
+If a multiplexer is used to select which hardware signal is fed to
+e.g. an ADC channel, these bindings describe that situation.
+
+Required properties:
+- compatible : "io-channel-mux"
+- io-channels : Channel node of the parent channel that has multiplexed
+ input.
+- io-channel-names : Should be "parent".
+- #address-cells = <1>;
+- #size-cells = <0>;
+- mux-controls : Mux controller node to use for operating the mux
+- channels : List of strings, labeling the mux controller states.
+
+For each non-empty string in the channels property, an io-channel will
+be created. The number of this io-channel is the same as the index into
+the list of strings in the channels property, and also matches the mux
+controller state. The mux controller state is described in
+../mux/mux-controller.txt
+
+Example:
+ mux: mux-controller {
+ compatible = "mux-gpio";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+ <&pioA 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ adc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ mux-controls = <&mux>;
+
+ channels = "sync", "in", "system-regulator";
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index a0cce325b08e..eea8432b2df1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6474,6 +6474,12 @@ F: Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
F: Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
F: drivers/iio/adc/envelope-detector.c
+IIO MULTIPLEXER
+M: Peter Rosin <peda@...ntia.se>
+L: linux-iio@...r.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
+
IIO SUBSYSTEM AND DRIVERS
M: Jonathan Cameron <jic23@...nel.org>
R: Hartmut Knaack <knaack.h@....de>
--
2.1.4
Powered by blists - more mailing lists