| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170514135500.4947-2-valentin_sitdikov@mentor.com>
Date: Sun, 14 May 2017 16:54:59 +0300
From: Valentin Sitdikov <valentin_sitdikov@...tor.com>
To: <lee.jones@...aro.org>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Valentin Sitdikov <valentin_sitdikov@...tor.com>,
Andrei Dranitca <Andrei_Dranitca@...tor.com>
Subject: [PATCH v2 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver
This patch adds documentation for the max7360 bindings.
The max7360 is multifunctional device containing gpio,
keypad, pwm and rotary encoder submodules.
Signed-off-by: Valentin Sitdikov <valentin_sitdikov@...tor.com>
Signed-off-by: Andrei Dranitca <Andrei_Dranitca@...tor.com>
---
Documentation/devicetree/bindings/mfd/max7360.txt | 72 +++++++++++++++++++++++
max7360.txt | 72 +++++++++++++++++++++++
2 files changed, 144 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max7360.txt
create mode 100644 max7360.txt
diff --git a/Documentation/devicetree/bindings/mfd/max7360.txt b/Documentation/devicetree/bindings/mfd/max7360.txt
new file mode 100644
index 0000000..fd83227
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max7360.txt
@@ -0,0 +1,72 @@
+* Maxim MAX7360 multi-function device
+
+The Maxim MAX7360 is a multifunction device which includes
+64 key switches, eight LED drivers/GPIOs, PWM intensity control,
+and rotary switch control.
+
+Required properties:
+- compatible: Should be the following: "maxim,max7360"
+- reg: Specifies the i2c slave address of the max7360 block. It can be 0x38, 0x3a, 0x3c or 0x3e IIUC.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from MAX7360 are routed to.
+- interrupt-names: list of "inti" and "intk"
+- interrupt-controller: Identifies the device as an interrupt controller.
+- #interrupt-cells : Number of cells to encode an interrupt source, shall be 1.
+
+Examples:
+
+Without subnodes:
+ max7360@38 {
+ compatible = "maxim,max7360";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>, <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "inti", "intk";
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+
+ };
+
+With subnodes:
+ max7360@38 {
+ compatible = "maxim,max7360";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "int-shared";
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+
+ gpio {
+ compatible = "maxim,max7360-gpio";
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ interrupts = <0>;
+ };
+
+ keypad {
+ compatible = "maxim,max7360-keypad";
+ maxim,debounce_reg = /bits/ 8 <0xef>;
+ maxim,ports_reg = /bits/ 8 <0xae>;
+ linux,keymap = < MATRIX_KEY(0, 0, KEY_F5)
+ MATRIX_KEY(1, 0, KEY_F4) >;
+ keypad,num-rows = <2>;
+ keypad,num-columns = <1>;
+ interrupts = <1>;
+ };
+
+ pwm {
+ compatible = "maxim,max7360-pwm";
+ #pwm-cells = <0x2>;
+ };
+
+ rotary_encoder {
+ compatible = "maxim,max7360-rotary";
+ interrupts = <2>;
+ };
+
+ };
diff --git a/max7360.txt b/max7360.txt
new file mode 100644
index 0000000..359073a
--- /dev/null
+++ b/max7360.txt
@@ -0,0 +1,72 @@
+* Maxim MAX7360 multi-function device
+
+The Maxim MAX7360 is a multifunction device which includes
+64 key switches, eight LED drivers/GPIOs, PWM intensity control,
+and rotary switch control.
+
+Required properties:
+- compatible: Should be the following: "maxim,max7360"
+- reg: Specifies the i2c slave address of the max7360 block. It can be 0x38, 0x3a, 0x3c or 0x3e IIUC.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from MAX7360 are routed to.
+- interrupt-names: might be "int-shared" or list of "inti" and "intk"
+- interrupt-controller: Identifies the device as an interrupt controller.
+- #interrupt-cells : Number of cells to encode an interrupt source, shall be 1.
+
+Examples:
+
+Without subnodes:
+ max7360@38 {
+ compatible = "maxim,max7360";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "int-shared";
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+
+ };
+
+With subnodes:
+ max7360@38 {
+ compatible = "maxim,max7360";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "int-shared";
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+
+ max7360_gpio: max7360_gpio@0 {
+ compatible = "maxim,max7360-gpio";
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ interrupts = <0>;
+ };
+
+ max7360_keypad {
+ compatible = "maxim,max7360-keypad";
+ maxim,debounce_reg = /bits/ 8 <0xef>;
+ maxim,ports_reg = /bits/ 8 <0xae>;
+ linux,keymap = < MATRIX_KEY(0, 0, KEY_F5)
+ MATRIX_KEY(1, 0, KEY_F4) >;
+ keypad,num-rows = <2>;
+ keypad,num-columns = <1>;
+ interrupts = <1>;
+ };
+
+ max7360_pwm: max7360_pwm {
+ compatible = "maxim,max7360-pwm";
+ #pwm-cells = <0x2>;
+ };
+
+ max7360_rotary_encoder {
+ compatible = "maxim,max7360-rotary";
+ interrupts = <2>;
+ };
+
+ };
--
2.9.3
Powered by blists - more mailing lists