[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1494849741-21294-1-git-send-email-anup.patel@broadcom.com>
Date: Mon, 15 May 2017 17:32:10 +0530
From: Anup Patel <anup.patel@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Michael Turquette <mturquette@...libre.com>
Cc: Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Jon Mason <jonmason@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Oza Pawandeep <oza.oza@...adcom.com>,
Srinath Mannam <srinath.mannam@...adcom.com>,
Pramod Kumar <pramod.kumar@...adcom.com>,
Sandeep Tripathy <sandeep.tripathy@...adcom.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com,
Anup Patel <anup.patel@...adcom.com>
Subject: [PATCH v2 00/11] Broadcom Stingray SOC Initial Support
This patchset adds initial support of Broadcom Stingray SOC
by reusing existing Broadcom iProc device drivers.
Most of the patches in this patchset are DT patches except
the Stingray clock tree support which just one patch.
This patchset is based on Linux-4.12-rc1 and it is also available
at stingray-v2 branch of https://github.com/Broadcom/arm64-linux.git
Changes since v1:
- Rebased patches for Linux-4.12-rc1
- Removed unwanted /memreserve/ from bcm958742-base.dtsi
- Use ranges DT property to clear view of memory-layout
- Make bcm-sr.h part of clock DT bindings patch
Anup Patel (3):
dt-bindings: bcm: Add Broadcom Stingray bindings document
arm64: dts: Initial DTS files for Broadcom Stingray SOC
arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
Oza Pawandeep (1):
arm64: dts: Add I2C DT nodes for Stingray SoC
Pramod Kumar (3):
arm64: dts: Add NAND DT nodes for Stingray SOC
arm64: dts: Add pinctrl DT nodes for Stingray SOC
arm64: dts: Add GPIO DT nodes for Stingray SOC
Sandeep Tripathy (3):
dt-bindings: clk: Extend binding doc for Stingray SOC
clk: bcm: Add clocks for Stingray SOC
arm64: dts: Add clock DT nodes for Stingray SOC
Srinath Mannam (1):
arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
.../devicetree/bindings/arm/bcm/brcm,stingray.txt | 12 +
.../bindings/clock/brcm,iproc-clocks.txt | 76 ++++
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/stingray/Makefile | 6 +
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 134 ++++++
.../boot/dts/broadcom/stingray/bcm958742k.dts | 78 ++++
.../boot/dts/broadcom/stingray/bcm958742t.dts | 40 ++
.../boot/dts/broadcom/stingray/stingray-clock.dtsi | 170 ++++++++
.../dts/broadcom/stingray/stingray-pinctrl.dtsi | 345 +++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 465 +++++++++++++++++++++
drivers/clk/bcm/Kconfig | 8 +
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 300 +++++++++++++
include/dt-bindings/clock/bcm-sr.h | 101 +++++
.../dt-bindings/pinctrl/brcm,pinctrl-stingray.h | 68 +++
15 files changed, 1805 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/Makefile
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
create mode 100644 drivers/clk/bcm/clk-sr.c
create mode 100644 include/dt-bindings/clock/bcm-sr.h
create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
--
2.7.4
Powered by blists - more mailing lists