linux-kernel - [PATCH v3 0/2] XRA1403,gpio - add XRA1403 gpio expander driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <cover.1494827688.git.nandor.han@ge.com>
Date:   Mon, 15 May 2017 08:58:24 +0300
From:   Nandor Han <nandor.han@...com>
To:     gregkh@...uxfoundation.org, davem@...emloft.net,
        geert@...ux-m68k.org, mchehab@...nel.org, daniel.vetter@...ll.ch,
        linus.walleij@...aro.org, gnurou@...il.com, robh+dt@...nel.org,
        mark.rutland@....com, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Nandor Han <nandor.han@...com>
Subject: [PATCH v3 0/2] XRA1403,gpio - add XRA1403 gpio expander driver

The patchset will add a driver to support basic functionality for
XRA1403 device. Features supported:
        - get/set GPIO direction (input, output)
        - get/set GPIO level (low, high)

Documentation: A gpio-xra1403.txt file was added to document the DTS
	bindings related to driver.

Testing:

1.1 XRA1403 connected to iMX53 MCU
1.2 Use the GPIO tools provided by kernel from tools/gpio dir

2.1 `lsgpio`

root@...on ppd:~# lsgpio
GPIO chip: gpiochip8, "xra1403", 16 GPIO lines
        line  0: unnamed unused [output]
        line  1: unnamed unused [output]
        line  2: unnamed unused [output]
        line  3: unnamed unused [output]
        line  4: unnamed unused [output]
        line  5: unnamed unused
        line  6: unnamed unused
        line  7: unnamed unused [output]
        line  8: unnamed unused [output]
        line  9: unnamed unused
        line 10: unnamed unused [output]
        line 11: unnamed unused
        line 12: unnamed unused
        line 13: unnamed unused
        line 14: unnamed unused
        line 15: unnamed unused [output]
GPIO chip: gpiochip7, "xra1403", 16 GPIO lines
        line  0: unnamed unused
        line  1: unnamed unused
        line  2: unnamed unused
        line  3: unnamed unused
        line  4: unnamed unused
        line  5: unnamed unused
        line  6: unnamed unused
        line  7: unnamed unused
        line  8: unnamed unused
        line  9: unnamed unused
        line 10: unnamed unused
        line 11: unnamed unused
        line 12: unnamed unused
        line 13: unnamed unused
        line 14: unnamed unused
        line 15: unnamed unused

3.1 `gpio-hammer`

root@...on ppd:~# gpio-hammer -n gpiochip8 -o0 -o1 -o2 -o3
Hammer lines [0, 1, 2, 3] on gpiochip8, initial states: [0, 0, 0, 0]
[\] [0: 0, 1: 0, 2: 0, 3: 0]
...
[\] [0: 1, 1: 1, 2: 1, 3: 1]

When using `gpio-hammer` I also attached an oscilloscope to one of the pins and I was
able to monitor and validate the GPIO status.


Changes since v2: - improve the commit message by removing the "sysfs"
                    dependency and be more clear.
                  - include "seq_file.h" header.
    Note: documentation patches were accepted already.

Changes since v1: - use regmap for driver
                  - small changes to documentation


Nandor Han (2):
  gpio - Add EXAR XRA1403 SPI GPIO expander driver
  Add XRA1403 support to MAINTAINERS file

 MAINTAINERS                 |   8 ++
 drivers/gpio/Kconfig        |   5 +
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/gpio-xra1403.c | 237 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 251 insertions(+)
 create mode 100644 drivers/gpio/gpio-xra1403.c

-- 
2.10.1