lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1494866693-2850-3-git-send-email-logang@deltatee.com>
Date:   Mon, 15 May 2017 10:44:53 -0600
From:   Logan Gunthorpe <logang@...tatee.com>
To:     Bjorn Helgaas <bhelgaas@...gle.com>
Cc:     Kurt Schwemmer <kurt.schwemmer@...rosemi.com>,
        Stephen Bates <stephen.bates@...rosemi.com>,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
        Logan Gunthorpe <logang@...tatee.com>
Subject: [PATCH 2/2] switchtec: fix minor bug with partition id register

When a switch endpoind is configured without NTB the mmio_ntb registers
will read all zeros. However, in corner case configurations where the
partition ID is not zero and NTB is not enabled then the code will have
the wrong partition ID and this causes the driver to use the wrong
set of drivers. To fix this we simply take the partition ID from the
system info region.

Signed-off-by: Logan Gunthorpe <logang@...tatee.com>
Reported-by: Dingbao Chen <dingbao.chen@...rosemi.com>
---
 drivers/pci/switch/switchtec.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index abaa227a..f6a6340 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -1441,12 +1441,15 @@ static int switchtec_init_pci(struct switchtec_dev *stdev,
 	stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
 	stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET;
 	stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET;
-	stdev->partition = ioread8(&stdev->mmio_ntb->partition_id);
+	stdev->partition = ioread8(&stdev->mmio_sys_info->partition_id);
 	stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count);
 	stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET;
 	stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[stdev->partition];
 	stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET;
 
+	if (stdev->partition_count < 1)
+		stdev->partition_count = 1;
+
 	init_pff(stdev);
 
 	pci_set_drvdata(pdev, stdev);
-- 
2.1.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ