[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v6598dSC278vVdQ_f54piLS0y4BnN3V4ZUhbGXKavx+ryQ@mail.gmail.com>
Date: Tue, 16 May 2017 13:18:34 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Quentin Schulz <quentin.schulz@...e-electrons.com>
Cc: Sebastian Reichel <sre@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Chen-Yu Tsai <wens@...e.org>,
"open list:THERMAL" <linux-pm@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Liam Breck <liam@...workimprov.net>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
linux-sunxi <linux-sunxi@...glegroups.com>
Subject: Re: [PATCH 1/4] power: supply: axp20x_battery: add support for DT battery
On Thu, May 11, 2017 at 9:42 PM, Quentin Schulz
<quentin.schulz@...e-electrons.com> wrote:
> This adds support in X-Powers AXP20X and AXP22X battery driver for a
> fixed battery in DT.
>
> It will take the minimum supported voltage by the battery as defined in
> the battery DT node and set the V_OFF register to this value, telling
> the system to shut down if the supplied power is below this value.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@...e-electrons.com>
> ---
> drivers/power/supply/axp20x_battery.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
> index 5d29b2eab8fc..66f530541735 100644
> --- a/drivers/power/supply/axp20x_battery.c
> +++ b/drivers/power/supply/axp20x_battery.c
> @@ -433,6 +433,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
> {
> struct axp20x_batt_ps *axp20x_batt;
> struct power_supply_config psy_cfg = {};
> + struct power_supply_battery_info info;
>
> if (!of_device_is_available(pdev->dev.of_node))
> return -ENODEV;
> @@ -484,6 +485,15 @@ static int axp20x_power_probe(struct platform_device *pdev)
> return PTR_ERR(axp20x_batt->batt);
> }
>
> + if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
This is not in -next. It would help if you mention any requisite patches.
ChenYu
> + int vmin = info.voltage_min_design_uv;
> +
> + if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
> + vmin))
> + dev_err(&pdev->dev,
> + "couldn't set voltage_min_design\n");
> + }
> +
> return 0;
> }
>
> --
> 2.11.0
>
Powered by blists - more mailing lists