| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1495059429-15247-2-git-send-email-dwoods@mellanox.com>
Date: Wed, 17 May 2017 18:17:09 -0400
From: David Woods <dwoods@...lanox.com>
To: ulf.hansson@...aro.org, jh80.chung@...sung.com,
shawn.lin@...k-chips.com, hkallweit1@...il.com,
adrian.hunter@...el.com, cmetcalf@...lanox.com,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: David Woods <dwoods@...lanox.com>, stable@...r.linux.org
Subject: [PATCH 2/2] mmc: core: Use device_property_read instead of of_property_read
Using the device_property interfaces allows mmc drivers to work
on platforms which run on either device tree or ACPI.
Signed-off-by: David Woods <dwoods@...lanox.com>
Reviewed-by: Chris Metcalf <cmetcalf@...lanox.com>
Cc: stable@...r.linux.org
---
drivers/mmc/core/host.c | 72 ++++++++++++++++++++++++-------------------------
1 file changed, 35 insertions(+), 37 deletions(-)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 3f8c85d..d2c059e 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -176,19 +176,17 @@ static void mmc_retune_timer(unsigned long data)
*/
int mmc_of_parse(struct mmc_host *host)
{
- struct device_node *np;
+ struct device *dev = host->parent;
u32 bus_width;
int ret;
bool cd_cap_invert, cd_gpio_invert = false;
bool ro_cap_invert, ro_gpio_invert = false;
- if (!host->parent || !host->parent->of_node)
+ if (!dev)
return 0;
- np = host->parent->of_node;
-
/* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
- if (of_property_read_u32(np, "bus-width", &bus_width) < 0) {
+ if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) {
dev_dbg(host->parent,
"\"bus-width\" property is missing, assuming 1 bit.\n");
bus_width = 1;
@@ -210,7 +208,7 @@ int mmc_of_parse(struct mmc_host *host)
}
/* f_max is obtained from the optional "max-frequency" property */
- of_property_read_u32(np, "max-frequency", &host->f_max);
+ device_property_read_u32(dev, "max-frequency", &host->f_max);
/*
* Configure CD and WP pins. They are both by default active low to
@@ -225,12 +223,12 @@ int mmc_of_parse(struct mmc_host *host)
*/
/* Parse Card Detection */
- if (of_property_read_bool(np, "non-removable")) {
+ if (device_property_read_bool(dev, "non-removable")) {
host->caps |= MMC_CAP_NONREMOVABLE;
} else {
- cd_cap_invert = of_property_read_bool(np, "cd-inverted");
+ cd_cap_invert = device_property_read_bool(dev, "cd-inverted");
- if (of_property_read_bool(np, "broken-cd"))
+ if (device_property_read_bool(dev, "broken-cd"))
host->caps |= MMC_CAP_NEEDS_POLL;
ret = mmc_gpiod_request_cd(host, "cd", 0, true,
@@ -256,7 +254,7 @@ int mmc_of_parse(struct mmc_host *host)
}
/* Parse Write Protection */
- ro_cap_invert = of_property_read_bool(np, "wp-inverted");
+ ro_cap_invert = device_property_read_bool(dev, "wp-inverted");
ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
if (!ret)
@@ -264,64 +262,64 @@ int mmc_of_parse(struct mmc_host *host)
else if (ret != -ENOENT && ret != -ENOSYS)
return ret;
- if (of_property_read_bool(np, "disable-wp"))
+ if (device_property_read_bool(dev, "disable-wp"))
host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
/* See the comment on CD inversion above */
if (ro_cap_invert ^ ro_gpio_invert)
host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
- if (of_property_read_bool(np, "cap-sd-highspeed"))
+ if (device_property_read_bool(dev, "cap-sd-highspeed"))
host->caps |= MMC_CAP_SD_HIGHSPEED;
- if (of_property_read_bool(np, "cap-mmc-highspeed"))
+ if (device_property_read_bool(dev, "cap-mmc-highspeed"))
host->caps |= MMC_CAP_MMC_HIGHSPEED;
- if (of_property_read_bool(np, "sd-uhs-sdr12"))
+ if (device_property_read_bool(dev, "sd-uhs-sdr12"))
host->caps |= MMC_CAP_UHS_SDR12;
- if (of_property_read_bool(np, "sd-uhs-sdr25"))
+ if (device_property_read_bool(dev, "sd-uhs-sdr25"))
host->caps |= MMC_CAP_UHS_SDR25;
- if (of_property_read_bool(np, "sd-uhs-sdr50"))
+ if (device_property_read_bool(dev, "sd-uhs-sdr50"))
host->caps |= MMC_CAP_UHS_SDR50;
- if (of_property_read_bool(np, "sd-uhs-sdr104"))
+ if (device_property_read_bool(dev, "sd-uhs-sdr104"))
host->caps |= MMC_CAP_UHS_SDR104;
- if (of_property_read_bool(np, "sd-uhs-ddr50"))
+ if (device_property_read_bool(dev, "sd-uhs-ddr50"))
host->caps |= MMC_CAP_UHS_DDR50;
- if (of_property_read_bool(np, "cap-power-off-card"))
+ if (device_property_read_bool(dev, "cap-power-off-card"))
host->caps |= MMC_CAP_POWER_OFF_CARD;
- if (of_property_read_bool(np, "cap-mmc-hw-reset"))
+ if (device_property_read_bool(dev, "cap-mmc-hw-reset"))
host->caps |= MMC_CAP_HW_RESET;
- if (of_property_read_bool(np, "cap-sdio-irq"))
+ if (device_property_read_bool(dev, "cap-sdio-irq"))
host->caps |= MMC_CAP_SDIO_IRQ;
- if (of_property_read_bool(np, "full-pwr-cycle"))
+ if (device_property_read_bool(dev, "full-pwr-cycle"))
host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
- if (of_property_read_bool(np, "keep-power-in-suspend"))
+ if (device_property_read_bool(dev, "keep-power-in-suspend"))
host->pm_caps |= MMC_PM_KEEP_POWER;
- if (of_property_read_bool(np, "wakeup-source") ||
- of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */
+ if (device_property_read_bool(dev, "wakeup-source") ||
+ device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */
host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
- if (of_property_read_bool(np, "mmc-ddr-3_3v"))
+ if (device_property_read_bool(dev, "mmc-ddr-3_3v"))
host->caps |= MMC_CAP_3_3V_DDR;
- if (of_property_read_bool(np, "mmc-ddr-1_8v"))
+ if (device_property_read_bool(dev, "mmc-ddr-1_8v"))
host->caps |= MMC_CAP_1_8V_DDR;
- if (of_property_read_bool(np, "mmc-ddr-1_2v"))
+ if (device_property_read_bool(dev, "mmc-ddr-1_2v"))
host->caps |= MMC_CAP_1_2V_DDR;
- if (of_property_read_bool(np, "mmc-hs200-1_8v"))
+ if (device_property_read_bool(dev, "mmc-hs200-1_8v"))
host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
- if (of_property_read_bool(np, "mmc-hs200-1_2v"))
+ if (device_property_read_bool(dev, "mmc-hs200-1_2v"))
host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
- if (of_property_read_bool(np, "mmc-hs400-1_8v"))
+ if (device_property_read_bool(dev, "mmc-hs400-1_8v"))
host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
- if (of_property_read_bool(np, "mmc-hs400-1_2v"))
+ if (device_property_read_bool(dev, "mmc-hs400-1_2v"))
host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
- if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
+ if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe"))
host->caps2 |= MMC_CAP2_HS400_ES;
- if (of_property_read_bool(np, "no-sdio"))
+ if (device_property_read_bool(dev, "no-sdio"))
host->caps2 |= MMC_CAP2_NO_SDIO;
- if (of_property_read_bool(np, "no-sd"))
+ if (device_property_read_bool(dev, "no-sd"))
host->caps2 |= MMC_CAP2_NO_SD;
- if (of_property_read_bool(np, "no-mmc"))
+ if (device_property_read_bool(dev, "no-mmc"))
host->caps2 |= MMC_CAP2_NO_MMC;
- host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr);
+ host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr);
if (host->dsr_req && (host->dsr & ~0xffff)) {
dev_err(host->parent,
"device tree specified broken value for DSR: 0x%x, ignoring\n",
--
2.7.2
Powered by blists - more mailing lists