[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170519081541.26753-37-kishon@ti.com>
Date: Fri, 19 May 2017 13:45:36 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Tony Lindgren <tony@...mide.com>
CC: <linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-mmc@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Jonathan Corbet <corbet@....net>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>, <nsekhar@...com>,
<kishon@...com>
Subject: [PATCH 36/41] ARM: dts: am57xx-idk: Set MMC2 IO voltage to 3.3V
From: Sekhar Nori <nsekhar@...com>
MMC2 interface on AM57xx IDK, connected to
onboard eMMC, has IO voltage fixed to 3.3V.
Add no-1-8-v device-tree property to mmc2 node
in the board's device-tree file to reflect
this.
Note that the AM57xx SoC itself supports
dual-voltage on MMC2. The limitation above is
due to the board.
Signed-off-by: Sekhar Nori <nsekhar@...com>
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
arch/arm/boot/dts/am57xx-idk-common.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 5d6965ab7339..a8c9e5f714e4 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -413,6 +413,7 @@
bus-width = <8>;
ti,non-removable;
max-frequency = <96000000>;
+ no-1-8-v;
/delete-property/ mmc-hs200-1_8v;
};
--
2.11.0
Powered by blists - more mailing lists