[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <5a55e081d96fc6d2a28331b59df90f56d32a9f24.1495209464.git-series.gregory.clement@free-electrons.com>
Date: Fri, 19 May 2017 17:58:01 +0200
From: Gregory CLEMENT <gregory.clement@...e-electrons.com>
To: Stephen Boyd <sboyd@...eaurora.org>,
Mike Turquette <mturquette@...libre.com>,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Jason Cooper <jason@...edaemon.net>, Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Gregory CLEMENT <gregory.clement@...e-electrons.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
Nadav Haklai <nadavh@...vell.com>,
Kostya Porotchkin <kostap@...vell.com>,
Neta Zur Hershkovits <neta@...vell.com>,
Marcin Wojtas <mw@...ihalf.com>,
Omri Itach <omrii@...vell.com>,
Shadi Ammouri <shadi@...vell.com>
Subject: [PATCH 1/5] clk: mvebu: ap806: cosmetic improvement
Instead of using &pdev->dev all over the place, introduce a pointer
variable for it.
Signed-off-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>
---
drivers/clk/mvebu/ap806-system-controller.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/mvebu/ap806-system-controller.c b/drivers/clk/mvebu/ap806-system-controller.c
index 8155baccc98e..b2666b5c944f 100644
--- a/drivers/clk/mvebu/ap806-system-controller.c
+++ b/drivers/clk/mvebu/ap806-system-controller.c
@@ -36,20 +36,21 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
{
unsigned int freq_mode, cpuclk_freq;
const char *name, *fixedclk_name;
- struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
struct regmap *regmap;
u32 reg;
int ret;
regmap = syscon_node_to_regmap(np);
if (IS_ERR(regmap)) {
- dev_err(&pdev->dev, "cannot get regmap\n");
+ dev_err(dev, "cannot get regmap\n");
return PTR_ERR(regmap);
}
ret = regmap_read(regmap, AP806_SAR_REG, ®);
if (ret) {
- dev_err(&pdev->dev, "cannot read from regmap\n");
+ dev_err(dev, "cannot read from regmap\n");
return ret;
}
@@ -89,7 +90,7 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
cpuclk_freq = 600;
break;
default:
- dev_err(&pdev->dev, "invalid SAR value\n");
+ dev_err(dev, "invalid SAR value\n");
return -EINVAL;
}
@@ -99,7 +100,7 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
/* CPU clocks depend on the Sample At Reset configuration */
of_property_read_string_index(np, "clock-output-names",
0, &name);
- ap806_clks[0] = clk_register_fixed_rate(&pdev->dev, name, NULL,
+ ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
0, cpuclk_freq);
if (IS_ERR(ap806_clks[0])) {
ret = PTR_ERR(ap806_clks[0]);
@@ -108,7 +109,7 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
of_property_read_string_index(np, "clock-output-names",
1, &name);
- ap806_clks[1] = clk_register_fixed_rate(&pdev->dev, name, NULL, 0,
+ ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
cpuclk_freq);
if (IS_ERR(ap806_clks[1])) {
ret = PTR_ERR(ap806_clks[1]);
@@ -118,7 +119,7 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
/* Fixed clock is always 1200 Mhz */
of_property_read_string_index(np, "clock-output-names",
2, &fixedclk_name);
- ap806_clks[2] = clk_register_fixed_rate(&pdev->dev, fixedclk_name, NULL,
+ ap806_clks[2] = clk_register_fixed_rate(dev, fixedclk_name, NULL,
0, 1200 * 1000 * 1000);
if (IS_ERR(ap806_clks[2])) {
ret = PTR_ERR(ap806_clks[2]);
--
git-series 0.9.1
Powered by blists - more mailing lists