linux-kernel - Re: CHIPPro NAND issue with 4.12 rc1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170520171418.4e8a47e0@bbrezillon>
Date:   Sat, 20 May 2017 17:14:18 +0200
From:   Boris Brezillon <boris.brezillon@...e-electrons.com>
To:     Angus Ainslie <angus@...ea.ca>
Cc:     David Woodhouse <dwmw2@...radead.org>,
        Richard Weinberger <richard@....at>,
        Brian Norris <computersforpeace@...il.com>,
        Marek Vasut <marek.vasut@...il.com>,
        Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
        Maxime Ripard <maxime.ripard@...e-electrons.com>,
        Chen-Yu Tsai <wens@...e.org>, linux-mtd@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: CHIPPro NAND issue with 4.12 rc1

Le Sat, 20 May 2017 08:49:04 -0600,
Angus Ainslie <angus@...ea.ca> a écrit :

> Hi All,
> 
> I'm trying to boot a CHIPPro with the stock 4.12 rc1 kernel. If I make 
> no modifications to the sun5i-gr8-chip-pro.dtb the kernel boots but 
> can't find the root partition.
> 
> So I added the partitions to the dts file
> 
> diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts 
> b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
> index c55b11a..0e61e6b 100644
> --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
> +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
> @@ -146,6 +146,32 @@
>                  reg = <0>;
>                  allwinner,rb = <0>;
>                  nand-ecc-mode = "hw";
> +    nand-on-flash-bbt;
> +
> +    spl@0 {
> +      label = "SPL";
> +      reg = /bits/ 64 <0x0 0x400000>;
> +    };
> +
> +    spl-backup@...000 {
> +      label = "SPL.backup";
> +      reg = /bits/ 64 <0x400000 0x400000>;
> +    };
> +
> +    u-boot@...000 {
> +      label = "U-Boot";
> +      reg = /bits/ 64 <0x800000 0x400000>;
> +    };
> +
> +    env@...000 {
> +      label = "env";
> +      reg = /bits/ 64 <0xc00000 0x400000>;
> +    };
> +
> +    rootfs@...0000 {
> +      label = "rootfs";
> +      reg = /bits/ 64 <0x1000000 0x1f000000>;
> +    };
>          };
>   };
> 
> and now the kernel finds the partition but it times out trying to mount 
> it. It seems to be something in the dts files because if I use the 
> ntc-gr8-crumb.dts from the ntc 4.4.30 kernel then the system boots all 
> the way to userland.

Hm, that's weird. Just changing the dtb makes it work? Did you try to
dump both dtbs and figure out what else changes?

Also, I wonder how the NAND is correctly detected without this patch
[1].

> 
> [    7.130000] ubi0: scanning is finished
> [    7.150000] ubi0: attached mtd4 (name "rootfs", size 496 MiB)
> [    7.160000] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 
> bytes
> [    7.170000] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 
> 1024
> [    7.180000] ubi0: VID header offset: 1024 (aligned 1024), data 
> offset: 4096
> [    7.190000] ubi0: good PEBs: 1977, bad PEBs: 7, corrupted PEBs: 0
> [    7.200000] ubi0: user volume: 1, internal volumes: 1, max. volumes 
> count: 128
> [    7.210000] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, 
> image sequence number: 1444477407
> [    7.220000] ubi0: available PEBs: 1, total reserved PEBs: 1976, PEBs 
> reserved for bad PEB handling: 33

UBI attach works...

> [    7.240000] hctosys: unable to open rtc device (rtc0)
> [    7.250000] vcc3v0: disabling
> [    7.250000] ALSA device list:
> [    7.260000]   #0: sun4i-codec
> [    7.260000] ubi0: background thread "ubi_bgt0d" started, PID 53
> [    8.320000] sunxi_nand 1c03000.nand: wait interrupt timedout
> [    9.320000] sunxi_nand 1c03000.nand: wait interrupt timedout
> [   10.330000] sunxi_nand 1c03000.nand: wait for empty cmd FIFO timedout
> [   11.340000] sunxi_nand 1c03000.nand: wait for empty cmd FIFO timedout
> [   12.350000] sunxi_nand 1c03000.nand: wait for empty cmd FIFO timedout
> [   13.360000] sunxi_nand 1c03000.nand: wait for empty cmd FIFO timedout
> [   14.370000] sunxi_nand 1c03000.nand: wait for empty cmd FIFO timedout
> [   14.380000] ubi0 warning: ubi_io_read: error -110 while reading 4096 
> bytes from PEB 1034:4096, read only 0 bytes, retry

And suddenly you get timeouts. That's really weird.

[1]https://github.com/NextThingCo/linux/commit/5ebc35ce1223ef14ace9479d5f97d0fce979e550