linux-kernel - Re: [PATCH v5] backlight: report error on failure

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20170522111009.c75vhzfx4wo5ffjp@dell>
Date:   Mon, 22 May 2017 12:10:09 +0100
From:   Lee Jones <lee.jones@...aro.org>
To:     Sudip Mukherjee <sudipm.mukherjee@...il.com>
Cc:     Daniel Thompson <daniel.thompson@...aro.org>,
        Jingoo Han <jingoohan1@...il.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        linux-kernel@...r.kernel.org, linux-fbdev@...r.kernel.org,
        Andy Shevchenko <andy.shevchenko@...il.com>
Subject: Re: [PATCH v5] backlight: report error on failure

On Wed, 17 May 2017, Sudip Mukherjee wrote:

> It is possible to update the backlight power and the brightness using
> the sysfs and on writing it either returns the count or if the callback
> function does not exist then returns the error code 'ENXIO'.
> 
> We have a situation where the userspace client is writing to the sysfs
> to update the power and since the callback function exists the client
> receives the return value as count and considers the operation to be
> successful. That is correct as the write to the sysfs was successful.
> But there is no way to know if the actual operation was done or not.
> 
> backlight_update_status() returns the error code if it fails. Pass that
> to the userspace client who is trying to update the power so that the
> client knows that the operation failed.
> 
> Acked-by: Daniel Thompson <daniel.thompson@...aro.org>
> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@...ethink.co.uk>
> ---
> 
> v5: dropped the ternary condition
> v4: ABI comment removed from commit message
> v3: remove rc = 0, and update rc with count in else condition.
> v2: update power with old value on failure.
> 
>  drivers/video/backlight/backlight.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)

Applied, thanks.

> diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
> index 288318a..8049e76 100644
> --- a/drivers/video/backlight/backlight.c
> +++ b/drivers/video/backlight/backlight.c
> @@ -134,7 +134,7 @@ static ssize_t bl_power_store(struct device *dev, struct device_attribute *attr,
>  {
>  	int rc;
>  	struct backlight_device *bd = to_backlight_device(dev);
> -	unsigned long power;
> +	unsigned long power, old_power;
>  
>  	rc = kstrtoul(buf, 0, &power);
>  	if (rc)
> @@ -145,10 +145,16 @@ static ssize_t bl_power_store(struct device *dev, struct device_attribute *attr,
>  	if (bd->ops) {
>  		pr_debug("set power to %lu\n", power);
>  		if (bd->props.power != power) {
> +			old_power = bd->props.power;
>  			bd->props.power = power;
> -			backlight_update_status(bd);
> +			rc = backlight_update_status(bd);
> +			if (rc)
> +				bd->props.power = old_power;
> +			else
> +				rc = count;
> +		} else {
> +			rc = count;
>  		}
> -		rc = count;
>  	}
>  	mutex_unlock(&bd->ops_lock);
>  
> @@ -176,8 +182,7 @@ int backlight_device_set_brightness(struct backlight_device *bd,
>  		else {
>  			pr_debug("set brightness to %lu\n", brightness);
>  			bd->props.brightness = brightness;
> -			backlight_update_status(bd);
> -			rc = 0;
> +			rc = backlight_update_status(bd);
>  		}
>  	}
>  	mutex_unlock(&bd->ops_lock);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog