linux-kernel - [PATCH v5 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1495462000-28979-4-git-send-email-rasmus.villemoes@prevas.dk>
Date:   Mon, 22 May 2017 16:06:39 +0200
From:   Rasmus Villemoes <rasmus.villemoes@...vas.dk>
To:     Wim Van Sebroeck <wim@...ana.be>,
        Guenter Roeck <linux@...ck-us.net>,
        Jonathan Corbet <corbet@....net>
CC:     Sebastian Reichel <sebastian.reichel@...labora.co.uk>,
        <esben.haabendal@...il.com>,
        Rasmus Villemoes <rasmus.villemoes@...vas.dk>,
        <linux-watchdog@...r.kernel.org>, <linux-doc@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v5 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT

This allows setting a default value for the watchdog.open_timeout
commandline parameter via Kconfig.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@...vas.dk>
---
 Documentation/watchdog/watchdog-parameters.txt | 9 +++++----
 drivers/watchdog/Kconfig                       | 9 +++++++++
 drivers/watchdog/watchdog_dev.c                | 2 +-
 3 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
index 4801ec6..6a55a3d 100644
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -12,10 +12,11 @@ The watchdog core currently understands one parameter,
 watchdog.open_timeout. This is the maximum time, in milliseconds, for
 which the watchdog framework will take care of pinging a hardware
 watchdog until userspace opens the corresponding /dev/watchdogN
-device. A value of 0 (the default) means an infinite timeout. Setting
-this to a non-zero value can be useful to ensure that either userspace
-comes up properly, or the board gets reset and allows fallback logic
-in the bootloader to try something else.
+device. The defalt value is CONFIG_WATCHDOG_OPEN_TIMEOUT. A value of 0
+means an infinite timeout. Setting this to a non-zero value can be
+useful to ensure that either userspace comes up properly, or the board
+gets reset and allows fallback logic in the bootloader to try
+something else.
 
 
 -------------------------------------------------
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 8b9049d..11946fb 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -52,6 +52,15 @@ config WATCHDOG_SYSFS
 	  Say Y here if you want to enable watchdog device status read through
 	  sysfs attributes.
 
+config WATCHDOG_OPEN_TIMEOUT
+	int "Timeout value for opening watchdog device"
+	default 0
+	help
+	  The maximum time, in milliseconds, for which the watchdog
+	  framework takes care of pinging a hardware watchdog. A value
+	  of 0 means infinite. The value set here can be overridden by
+	  the commandline parameter "watchdog.open_timeout".
+
 #
 # General Watchdog drivers
 #
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index c807067..098b9cb 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -81,7 +81,7 @@ static struct watchdog_core_data *old_wd_data;
 
 static struct workqueue_struct *watchdog_wq;
 
-static unsigned open_timeout;
+static unsigned open_timeout = CONFIG_WATCHDOG_OPEN_TIMEOUT;
 module_param(open_timeout, uint, 0644);
 
 static bool watchdog_past_open_deadline(struct watchdog_core_data *data)
-- 
2.7.4