[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3b507e82-d8d1-c2c4-8a50-ca130382171a@st.com>
Date: Mon, 22 May 2017 15:11:45 +0000
From: Olivier MOYSAN <olivier.moysan@...com>
To: Mark Brown <broonie@...nel.org>
CC: "lgirdwood@...il.com" <lgirdwood@...il.com>,
"perex@...ex.cz" <perex@...ex.cz>,
"tiwai@...e.com" <tiwai@...e.com>,
"mcoquelin.stm32@...il.com" <mcoquelin.stm32@...il.com>,
Alexandre TORGUE <alexandre.torgue@...com>,
"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
"robh@...nel.org" <robh@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"kernel@...inux.com" <kernel@...inux.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Arnaud POULIQUEN <arnaud.pouliquen@...com>,
Benjamin GAIGNARD <benjamin.gaignard@...com>
Subject: Re: [PATCH v4 2/3] ASoC: stm32: Add I2S driver
Hello Mark,
Thanks, for applying the patches.
On 05/19/2017 07:33 PM, Mark Brown wrote:
> On Thu, May 18, 2017 at 05:19:52PM +0200, olivier moysan wrote:
>
> This looks good so I'm going to apply it, a few things below though -
> can you please send a followup patch for the issue with the Kconfig
> symbol?
>
>> --- a/sound/soc/stm/Kconfig
>> +++ b/sound/soc/stm/Kconfig
>> @@ -5,4 +5,4 @@ menuconfig SND_SOC_STM32
>> select SND_SOC_GENERIC_DMAENGINE_PCM
>> select REGMAP_MMIO
>> help
>> - Say Y if you want to enable ASoC-support for STM32
>> + Say Y if you want to enable ASoC support for STM32
>
> This appears to be an unrelated typo fix.
>
ok
>> diff --git a/sound/soc/stm/Makefile b/sound/soc/stm/Makefile
>> index e466a47..8251931 100644
>> --- a/sound/soc/stm/Makefile
>> +++ b/sound/soc/stm/Makefile
>> @@ -4,3 +4,7 @@ obj-$(CONFIG_SND_SOC_STM32) += snd-soc-stm32-sai-sub.o
>>
>> snd-soc-stm32-sai-objs := stm32_sai.o
>> obj-$(CONFIG_SND_SOC_STM32) += snd-soc-stm32-sai.o
>> +
>> +# I2S
>> +snd-soc-stm32-i2s-objs := stm32_i2s.o
>> +obj-$(CONFIG_SND_SOC_STM32) += snd-soc-stm32-i2s.o
>
> Perhaps make this a separate option? It probably makes sense to rename
> the option for the SAI at the same time.
>
ok, I will fix it in a new patch.
>> +
>> + ret = clk_prepare_enable(i2s->pclk);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Enable pclk failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = clk_prepare_enable(i2s->i2sclk);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Enable i2sclk failed: %d\n", ret);
>> + goto err_pclk_disable;
>> + }
>
> It'd be nice to have runtime PM to disable these when the device is idle
> but that's not essential.
>
Yes, I agree.
BRs
olivier
Powered by blists - more mailing lists