[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <BN4PR11MB09968031D215F16D92680B22E6F80@BN4PR11MB0996.namprd11.prod.outlook.com>
Date: Mon, 22 May 2017 20:10:36 +0000
From: "Bernat, Yehezkel" <yehezkel.bernat@...el.com>
To: "Mario.Limonciello@...l.com" <Mario.Limonciello@...l.com>,
"mika.westerberg@...ux.intel.com" <mika.westerberg@...ux.intel.com>
CC: "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"andreas.noever@...il.com" <andreas.noever@...il.com>,
"Jamet, Michael" <michael.jamet@...el.com>,
"lukas@...ner.de" <lukas@...ner.de>,
"Levy, Amir (Jer)" <amir.jer.levy@...el.com>,
"luto@...nel.org" <luto@...nel.org>,
"Jared.Dominguez@...l.com" <Jared.Dominguez@...l.com>,
"andriy.shevchenko@...ux.intel.com"
<andriy.shevchenko@...ux.intel.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 00/24] Thunderbolt security levels and NVM firmware
upgrade
> -----Original Message-----
> From: Mario.Limonciello@...l.com [mailto:Mario.Limonciello@...l.com]
> Sent: Monday, May 22, 2017 23:08
> To: mika.westerberg@...ux.intel.com
> Cc: gregkh@...uxfoundation.org; andreas.noever@...il.com; Jamet,
> Michael <michael.jamet@...el.com>; Bernat, Yehezkel
> <yehezkel.bernat@...el.com>; lukas@...ner.de; Levy, Amir (Jer)
> <amir.jer.levy@...el.com>; luto@...nel.org; Jared.Dominguez@...l.com;
> andriy.shevchenko@...ux.intel.com; linux-kernel@...r.kernel.org
> Subject: RE: [PATCH 00/24] Thunderbolt security levels and NVM firmware
> upgrade
>
> > -----Original Message-----
> > From: Mika Westerberg [mailto:mika.westerberg@...ux.intel.com]
> > Sent: Monday, May 22, 2017 6:37 AM
> > To: Limonciello, Mario <Mario_Limonciello@...l.com>
> > Cc: gregkh@...uxfoundation.org; andreas.noever@...il.com;
> > michael.jamet@...el.com; yehezkel.bernat@...el.com; lukas@...ner.de;
> > amir.jer.levy@...el.com; luto@...nel.org; Dominguez, Jared
> > <Jared_Dominguez@...L.com>; andriy.shevchenko@...ux.intel.com;
> linux-
> > kernel@...r.kernel.org
> > Subject: Re: [PATCH 00/24] Thunderbolt security levels and NVM firmware
> upgrade
> >
> > On Sat, May 20, 2017 at 11:24:12AM +0300, Mika Westerberg wrote:
> > > On Fri, May 19, 2017 at 05:54:37PM +0000, Mario.Limonciello@...l.com
> wrote:
> > > > >
> > > > > It happens occasionally when you reboot the machine when a device
> is
> > > > > connected but seems to be dependent on the BIOS version. Since it is
> the
> > > > > BIOS who is supposed to enumerated these devices, I suspect that it
> is
> > > > > either problem in BIOS or our PCI enumeration code does something
> wrong.
> > > > >
> > > >
> > > > I'm fairly certain it's an issue somewhere with Linux PCI enumeration. I
> took
> > > > the exact same HW and switched it out the SSD to one w/ Win10 1607.
> > > > I set the dock and cable to "always allow" in TBT settings applet.
> > > >
> > > > I don't reproduce any problems with enumeration with the dock
> plugged in
> > > > on cold boot. All the devices hanging off the bridge show up properly.
> > >
> > > You mean in Windows you don't reproduce the problem, right? Even
> when
> > > you reboot the machine with devices connected.
> > >
> > > I tried on Intel Skull Canyon NUC so that I disabled the thunderbolt
> > > driver and after reboot (warm) I can see the PCI scan error about bus
> > > being partially hidden behind a bridge.
> > >
> > > When this happens PCIe ports of the thunderbolt device/host seem to
> be
> > > unconfigured and Linux then decides to reconfigure them which leads to
> > > the problem. When it works we get ACPI hotplug event to the PCIe root
> > > port and the PCIe upstream/downstream ports are properly configured
> by
> > > the BIOS.
> > >
> > > I guess Windows does something differently here than what we do when
> PCI
> > > devices are enumerated.
> >
> > We discussed this with our BIOS/firmware people and there was a
> firmware
> > bug that caused many issues around hotplug and reboot flows. Is is
> > possible for you to try with the latest BIOS and see if the issue
> > reproduces (or are you already running the latest)?
>
> I was 1 version behind, but I double checked with the latest version (1.1.15)
> and the same behavior exists on Linux (still works properly on Win10).
>
> If you have some more details about what the FW guys changed, I can check
> with my Dell FW team if they've picked up the same fix. I'm guessing it's not
> the same problem though considering it works properly on Win10?
What about the TBT NVM version?
NVM 16 sounds a bit old to me.
Powered by blists - more mailing lists