linux-kernel - [PATCH 4.11 104/197] USB: serial: io_ti: fix div-by-zero in set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170523200830.949167610@linuxfoundation.org>
Date:   Tue, 23 May 2017 22:07:45 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Johan Hovold <johan@...nel.org>
Subject: [PATCH 4.11 104/197] USB: serial: io_ti: fix div-by-zero in set_termios

4.11-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@...nel.org>

commit 6aeb75e6adfaed16e58780309613a578fe1ee90b upstream.

Fix a division-by-zero in set_termios when debugging is enabled and a
high-enough speed has been requested so that the divisor value becomes
zero.

Instead of just fixing the offending debug statement, cap the baud rate
at the base as a zero divisor value also appears to crash the firmware.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Johan Hovold <johan@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/usb/serial/io_ti.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2349,8 +2349,11 @@ static void change_port_settings(struct
 	if (!baud) {
 		/* pick a default, any default... */
 		baud = 9600;
-	} else
+	} else {
+		/* Avoid a zero divisor. */
+		baud = min(baud, 461550);
 		tty_encode_baud_rate(tty, baud, baud);
+	}
 
 	edge_port->baud_rate = baud;
 	config->wBaudRate = (__u16)((461550L + baud/2) / baud);