[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1495545173-22150-16-git-send-email-stefan.wahren@i2se.com>
Date: Tue, 23 May 2017 15:12:51 +0200
From: Stefan Wahren <stefan.wahren@...e.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"David S. Miller" <davem@...emloft.net>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Lino Sanfilippo <LinoSanfilippo@....de>,
Jakub Kicinski <kubakici@...pl>, devicetree@...r.kernel.org,
netdev@...r.kernel.org, linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org,
Stefan Wahren <stefan.wahren@...e.com>
Subject: [PATCH v6 net-next 15/17] dt-bindings: slave-device: add current-speed property
This adds a new DT property to define the current baud rate of the
slave device.
Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
Documentation/devicetree/bindings/serial/slave-device.txt | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt
index f660379..40110e0 100644
--- a/Documentation/devicetree/bindings/serial/slave-device.txt
+++ b/Documentation/devicetree/bindings/serial/slave-device.txt
@@ -21,6 +21,15 @@ Optional Properties:
can support. For example, a particular board has some signal
quality issue or the host processor can't support higher
baud rates.
+- current-speed : The current baud rate the device operates at. This should
+ only be present in case a driver has no chance to know
+ the baud rate of the slave device.
+ Examples:
+ * device supports auto-baud
+ * the rate is setup by a bootloader and there is no
+ way to reset the device
+ * device baud rate is configured by its firmware but
+ there is no way to request the actual settings
Example:
--
2.1.4
Powered by blists - more mailing lists