linux-kernel - Re: [PATCH 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20170523142409.lxe3gvk4vxagt3nr@rob-hp-laptop>
Date:   Tue, 23 May 2017 09:24:09 -0500
From:   Rob Herring <robh@...nel.org>
To:     Valentin Sitdikov <valentin_sitdikov@...tor.com>
Cc:     lee.jones@...aro.org, mark.rutland@....com,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Andrei Dranitca <Andrei_Dranitca@...tor.com>
Subject: Re: [PATCH 1/2] dt-bindings: mfd: Add DT bindings documentation for
 the max7360 mfd driver

On Thu, May 18, 2017 at 11:46:25AM +0300, Valentin Sitdikov wrote:
> This patch adds documentation for the max7360 bindings.
> The max7360 is multifunctional device containing gpio, keypad, pwm and rotary encoder submodules.

Wrap your lines.

> 
> Signed-off-by: Valentin Sitdikov <valentin_sitdikov@...tor.com>
> Signed-off-by: Andrei Dranitca <Andrei_Dranitca@...tor.com>
> ---

This is v2, but isn't marked that way and doesn't have a change log.

>  Documentation/devicetree/bindings/mfd/max7360.txt | 72 +++++++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/max7360.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/max7360.txt b/Documentation/devicetree/bindings/mfd/max7360.txt
> new file mode 100644
> index 0000000..fd83227
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/max7360.txt
> @@ -0,0 +1,72 @@
> +* Maxim MAX7360 multi-function device
> +
> +The Maxim MAX7360 is a multifunction device which includes
> +64 key switches, eight LED drivers/GPIOs, PWM intensity control,
> +and rotary switch control.
> +
> +Required properties:
> +- compatible: Should be the following: "maxim,max7360"
> +- reg: Specifies the i2c slave address of the max7360 block. It can be 0x38, 0x3a, 0x3c or 0x3e IIUC.

line wrap.

> +
> +Optional properties:
> +- interrupt-parent: Specifies the phandle of the interrupt controller to which
> +  the interrupts from MAX7360 are routed to.
> +- interrupt-names: list of "inti" and "intk"

You are missing "interrupts" property.

> +- interrupt-controller:  Identifies the device as an interrupt controller.
> +- #interrupt-cells :  Number of cells to encode an interrupt source, shall be 1.
> +
> +Examples:
> +
> +Without subnodes:
> +	max7360@38 {
> +		compatible = "maxim,max7360";
> +		reg = <0x38>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <23 IRQ_TYPE_LEVEL_LOW>, <23 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "inti", "intk";
> +		interrupt-controller;
> +		#interrupt-cells = <0x1>;
> +
> +	};
> +
> +With subnodes:
> +	max7360@38 {
> +		compatible = "maxim,max7360";
> +		reg = <0x38>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "int-shared";
> +		interrupt-controller;
> +		#interrupt-cells = <0x1>;
> +
> +		gpio {
> +			compatible = "maxim,max7360-gpio";
> +			gpio-controller;
> +			#gpio-cells = <0x2>;
> +			interrupt-controller;
> +			#interrupt-cells = <0x2>;
> +			interrupts = <0>;
> +		};
> +
> +		keypad {
> +			compatible = "maxim,max7360-keypad";
> +			maxim,debounce_reg = /bits/ 8 <0xef>;
> +			maxim,ports_reg = /bits/ 8 <0xae>;
> +			linux,keymap = < MATRIX_KEY(0, 0, KEY_F5)
> +					 MATRIX_KEY(1, 0, KEY_F4) >;
> +			keypad,num-rows = <2>;
> +			keypad,num-columns = <1>;
> +			interrupts = <1>;
> +		};
> +
> +		pwm {
> +			compatible = "maxim,max7360-pwm";
> +			#pwm-cells = <0x2>;
> +		};
> +
> +		rotary_encoder {

Still not right: rotary-encoder

> +			compatible = "maxim,max7360-rotary";
> +			interrupts = <2>;
> +		};
> +
> +	};
> -- 
> 2.9.3
>