[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170524081248.67198-2-songxiaowei@hisilicon.com>
Date: Wed, 24 May 2017 16:12:45 +0800
From: Xiaowei Song <songxiaowei@...ilicon.com>
To: <bhelgaas@...gle.com>, <kishon@...com>, <jingoohan1@...il.com>,
<arnd@...db.de>, <tn@...ihalf.com>, <keith.busch@...el.com>,
<niklas.cassel@...s.com>, <dhdang@....com>,
<liudongdong3@...wei.com>, <gabriele.paoloni@...wei.com>,
<robh+dt@...nel.org>, <mark.rutland@....com>,
<catalin.marinas@....com>, <will.deacon@....com>
CC: <chenyao11@...wei.com>, <puck.chen@...ilicon.com>,
<songxiaowei@...ilicon.com>, <guodong.xu@...aro.org>,
<wangbinghui@...ilicon.com>, <suzhuangluan@...ilicon.com>,
<linux-pci@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v6 1/4] PCI: hisi: Add DT binding for PCIe of Kirin SoC series
Signed-off-by: Xiaowei Song <songxiaowei@...ilicon.com>
---
.../devicetree/bindings/pci/kirin-pcie.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
new file mode 100644
index 000000000000..ffbdcba287f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -0,0 +1,49 @@
+HiSilicon Kirin SoCs PCIe host DT description
+
+Kirin PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver
+and inherits common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties
+- compatible:
+ "hisilicon,hi3660-pcie" for PCIe of Kirin960 SoC
+- reg: Should contain rc_dbi, apb, phy, config registers location and length.
+- reg-names: Must include the following entries:
+ "dbi": controller configuration registers;
+ "apb": apb Ctrl register defined by Kirin;
+ "phy": apb PHY register defined by Kirin;
+ "config": PCIe configuration space registers.
+- reset-gpio: The gpio to generate PCIe perst assert and deassert signal.
+
+Optional properties:
+
+Example based on kirin960:
+
+ pcie@...00000 {
+ compatible = "hisilicon,kirin-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
+ <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
+ reg-names = "dbi","apb","phy", "config";
+ bus-range = <0x0 0x1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 2 &gic 0 0 0 283 4>,
+ <0x0 0 0 3 &gic 0 0 0 284 4>,
+ <0x0 0 0 4 &gic 0 0 0 285 4>;
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
+ reset-gpio = <&gpio11 1 0 >;
+ };
--
2.11.GIT
Powered by blists - more mailing lists