[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4cb528c77f4d44bd0932b69f39b0d5b557d9eab1.1495683769.git.sean.wang@mediatek.com>
Date: Thu, 25 May 2017 12:02:45 +0800
From: <sean.wang@...iatek.com>
To: <robh+dt@...nel.org>, <matthias.bgg@...il.com>,
<mark.rutland@....com>, <devicetree@...r.kernel.org>,
<john@...ozen.org>, <linux-mediatek@...ts.infradead.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Sean Wang <sean.wang@...iatek.com>
Subject: [PATCH v4 7/9] arm: dts: mt7623: enable the usb device on the mt7623n rfb
From: John Crispin <john@...ozen.org>
All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.
Signed-off-by: John Crispin <john@...ozen.org>
Signed-off-by: Sean Wang <sean.wang@...iatek.com>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 4963e6a..2964b4c 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -28,6 +28,15 @@
serial1 = &uart1;
serial2 = &uart2;
};
+
+ usb_p1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&uart0 {
@@ -41,3 +50,12 @@
&uart2 {
status = "okay";
};
+
+&usb1 {
+ vbus-supply = <&usb_p1_vbus>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
--
2.7.4
Powered by blists - more mailing lists