[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170525081854.4701-9-guodong.xu@linaro.org>
Date: Thu, 25 May 2017 16:18:50 +0800
From: Guodong Xu <guodong.xu@...aro.org>
To: robh+dt@...nel.org, mark.rutland@....com, xuwei5@...ilicon.com,
catalin.marinas@....com, will.deacon@....com,
wangkefeng.wang@...wei.com, xuejiancheng@...ilicon.com,
peter.griffin@...aro.org, puck.chen@...ilicon.com
Cc: zhangfei.gao@...aro.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Guodong Xu <guodong.xu@...aro.org>
Subject: [PATCH v2 08/12] arm64: dts: hikey960: add WL1837 Bluetooth device node
This adds the serial slave device for the WL1837 Bluetooth interface.
Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 0a3f2e0..c25fff9 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -9,6 +9,7 @@
#include "hi3660.dtsi"
#include "hikey960-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "HiKey960";
@@ -63,6 +64,16 @@
status = "okay";
};
+&uart4 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,wl1837-st";
+ enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
+ max-speed = <921600>;
+ };
+};
+
&uart6 {
/* On Low speed expansion */
label = "LS-UART1";
--
2.10.2
Powered by blists - more mailing lists