| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <xa1t1srdhvz7.fsf@mina86.com>
Date: Thu, 25 May 2017 16:06:20 +0200
From: Michal Nazarewicz <mina86@...a86.com>
To: Ian Abbott <abbotti@....co.uk>, linux-kernel@...r.kernel.org,
linux-arch@...r.kernel.org
Cc: Alexander Potapenko <glider@...gle.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Arnd Bergmann <arnd@...db.de>, Borislav Petkov <bp@...e.de>,
Hidehiro Kawai <hidehiro.kawai.ez@...achi.com>,
Ian Abbott <abbotti@....co.uk>,
Jakub Kicinski <jakub.kicinski@...ronome.com>,
Johannes Berg <johannes.berg@...el.com>,
Kees Cook <keescook@...omium.org>,
Peter Zijlstra <peterz@...radead.org>,
Rasmus Villemoes <linux@...musvillemoes.dk>,
Steven Rostedt <rostedt@...dmis.org>
Subject: Re: [PATCH v5 5/6] bug: split BUILD_BUG stuff out into <linux/build_bug.h>
On Thu, May 25 2017, Ian Abbott wrote:
> Including <linux/bug.h> pulls in a lot of bloat from <asm/bug.h> and
> <asm-generic/bug.h> that is not needed to call the BUILD_BUG() family of
> macros. Split them out into their own header, <linux/build_bug.h>.
>
> Also correct some checkpatch.pl errors for the BUILD_BUG_ON_ZERO() and
> BUILD_BUG_ON_NULL() macros by adding parentheses around the bitfield
> widths that begin with a minus sign.
>
> Signed-off-by: Ian Abbott <abbotti@....co.uk>
> Cc: Andrew Morton <akpm@...ux-foundation.org>
> Cc: Kees Cook <keescook@...omium.org>
> Cc: Steven Rostedt <rostedt@...dmis.org>
> Cc: Peter Zijlstra <peterz@...radead.org>
> Cc: Jakub Kicinski <jakub.kicinski@...ronome.com>
> Cc: Rasmus Villemoes <linux@...musvillemoes.dk>
Acked-by: Michal Nazarewicz <mina86@...a86.com>
> ---
> v5: Actually, there was no v1 thru v4. I called this v5 to match the
> series.
> ---
> include/linux/bug.h | 74 +----------------------------------------
> include/linux/build_bug.h | 84 +++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 85 insertions(+), 73 deletions(-)
> create mode 100644 include/linux/build_bug.h
>
> diff --git a/include/linux/bug.h b/include/linux/bug.h
> index 483207cb99fb..5d5554c874fd 100644
> --- a/include/linux/bug.h
> +++ b/include/linux/bug.h
> @@ -3,6 +3,7 @@
>
> #include <asm/bug.h>
> #include <linux/compiler.h>
> +#include <linux/build_bug.h>
>
> enum bug_trap_type {
> BUG_TRAP_TYPE_NONE = 0,
> @@ -13,82 +14,9 @@ enum bug_trap_type {
> struct pt_regs;
>
> #ifdef __CHECKER__
> -#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) (0)
> -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) (0)
> -#define BUILD_BUG_ON_ZERO(e) (0)
> -#define BUILD_BUG_ON_NULL(e) ((void *)0)
> -#define BUILD_BUG_ON_INVALID(e) (0)
> -#define BUILD_BUG_ON_MSG(cond, msg) (0)
> -#define BUILD_BUG_ON(condition) (0)
> -#define BUILD_BUG() (0)
> #define MAYBE_BUILD_BUG_ON(cond) (0)
> #else /* __CHECKER__ */
>
> -/* Force a compilation error if a constant expression is not a power of 2 */
> -#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) \
> - BUILD_BUG_ON(((n) & ((n) - 1)) != 0)
> -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \
> - BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
> -
> -/*
> - * Force a compilation error if condition is true, but also produce a
> - * result (of value 0 and type size_t), so the expression can be used
> - * e.g. in a structure initializer (or where-ever else comma expressions
> - * aren't permitted).
> - */
> -#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:(-!!(e)); }))
> -#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:(-!!(e)); }))
> -
> -/*
> - * BUILD_BUG_ON_INVALID() permits the compiler to check the validity of the
> - * expression but avoids the generation of any code, even if that expression
> - * has side-effects.
> - */
> -#define BUILD_BUG_ON_INVALID(e) ((void)(sizeof((__force long)(e))))
> -
> -/**
> - * BUILD_BUG_ON_MSG - break compile if a condition is true & emit supplied
> - * error message.
> - * @condition: the condition which the compiler should know is false.
> - *
> - * See BUILD_BUG_ON for description.
> - */
> -#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
> -
> -/**
> - * BUILD_BUG_ON - break compile if a condition is true.
> - * @condition: the condition which the compiler should know is false.
> - *
> - * If you have some code which relies on certain constants being equal, or
> - * some other compile-time-evaluated condition, you should use BUILD_BUG_ON to
> - * detect if someone changes it.
> - *
> - * The implementation uses gcc's reluctance to create a negative array, but gcc
> - * (as of 4.4) only emits that error for obvious cases (e.g. not arguments to
> - * inline functions). Luckily, in 4.3 they added the "error" function
> - * attribute just for this type of case. Thus, we use a negative sized array
> - * (should always create an error on gcc versions older than 4.4) and then call
> - * an undefined function with the error attribute (should always create an
> - * error on gcc 4.3 and later). If for some reason, neither creates a
> - * compile-time error, we'll still have a link-time error, which is harder to
> - * track down.
> - */
> -#ifndef __OPTIMIZE__
> -#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
> -#else
> -#define BUILD_BUG_ON(condition) \
> - BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
> -#endif
> -
> -/**
> - * BUILD_BUG - break compile if used.
> - *
> - * If you have some code that you expect the compiler to eliminate at
> - * build time, you should use BUILD_BUG to detect if it is
> - * unexpectedly used.
> - */
> -#define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
> -
> #define MAYBE_BUILD_BUG_ON(cond) \
> do { \
> if (__builtin_constant_p((cond))) \
> diff --git a/include/linux/build_bug.h b/include/linux/build_bug.h
> new file mode 100644
> index 000000000000..b7d22d60008a
> --- /dev/null
> +++ b/include/linux/build_bug.h
> @@ -0,0 +1,84 @@
> +#ifndef _LINUX_BUILD_BUG_H
> +#define _LINUX_BUILD_BUG_H
> +
> +#include <linux/compiler.h>
> +
> +#ifdef __CHECKER__
> +#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) (0)
> +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) (0)
> +#define BUILD_BUG_ON_ZERO(e) (0)
> +#define BUILD_BUG_ON_NULL(e) ((void *)0)
> +#define BUILD_BUG_ON_INVALID(e) (0)
> +#define BUILD_BUG_ON_MSG(cond, msg) (0)
> +#define BUILD_BUG_ON(condition) (0)
> +#define BUILD_BUG() (0)
> +#else /* __CHECKER__ */
> +
> +/* Force a compilation error if a constant expression is not a power of 2 */
> +#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) \
> + BUILD_BUG_ON(((n) & ((n) - 1)) != 0)
> +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \
> + BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
> +
> +/*
> + * Force a compilation error if condition is true, but also produce a
> + * result (of value 0 and type size_t), so the expression can be used
> + * e.g. in a structure initializer (or where-ever else comma expressions
> + * aren't permitted).
> + */
> +#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:(-!!(e)); }))
> +#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:(-!!(e)); }))
> +
> +/*
> + * BUILD_BUG_ON_INVALID() permits the compiler to check the validity of the
> + * expression but avoids the generation of any code, even if that expression
> + * has side-effects.
> + */
> +#define BUILD_BUG_ON_INVALID(e) ((void)(sizeof((__force long)(e))))
> +
> +/**
> + * BUILD_BUG_ON_MSG - break compile if a condition is true & emit supplied
> + * error message.
> + * @condition: the condition which the compiler should know is false.
> + *
> + * See BUILD_BUG_ON for description.
> + */
> +#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
> +
> +/**
> + * BUILD_BUG_ON - break compile if a condition is true.
> + * @condition: the condition which the compiler should know is false.
> + *
> + * If you have some code which relies on certain constants being equal, or
> + * some other compile-time-evaluated condition, you should use BUILD_BUG_ON to
> + * detect if someone changes it.
> + *
> + * The implementation uses gcc's reluctance to create a negative array, but gcc
> + * (as of 4.4) only emits that error for obvious cases (e.g. not arguments to
> + * inline functions). Luckily, in 4.3 they added the "error" function
> + * attribute just for this type of case. Thus, we use a negative sized array
> + * (should always create an error on gcc versions older than 4.4) and then call
> + * an undefined function with the error attribute (should always create an
> + * error on gcc 4.3 and later). If for some reason, neither creates a
> + * compile-time error, we'll still have a link-time error, which is harder to
> + * track down.
> + */
> +#ifndef __OPTIMIZE__
> +#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
> +#else
> +#define BUILD_BUG_ON(condition) \
> + BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
> +#endif
> +
> +/**
> + * BUILD_BUG - break compile if used.
> + *
> + * If you have some code that you expect the compiler to eliminate at
> + * build time, you should use BUILD_BUG to detect if it is
> + * unexpectedly used.
> + */
> +#define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
> +
> +#endif /* __CHECKER__ */
> +
> +#endif /* _LINUX_BUILD_BUG_H */
--
Best regards
ミハウ “𝓶𝓲𝓷𝓪86” ナザレヴイツ
«If at first you don’t succeed, give up skydiving»
Powered by blists - more mailing lists