[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170525172911.11467-3-stillcompiling@gmail.com>
Date: Thu, 25 May 2017 10:29:07 -0700
From: Joshua Clayton <stillcompiling@...il.com>
To: Alan Tull <atull@...nel.org>,
Moritz Fischer <moritz.fischer@...us.com>,
Anatolij Gustschin <agust@...x.de>,
Bastian Stender <bst@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Joshua Clayton <stillcompiling@...il.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sascha Hauer <kernel@...gutronix.de>,
Fabio Estevam <fabio.estevam@....com>,
Russell King <linux@...linux.org.uk>,
linux-fpga@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v11 2/6] doc: dt: add altera-ps-spi binding document
Describe an altera-ps-spi devicetree entry, required features
Signed-off-by: Joshua Clayton <stillcompiling@...il.com>
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Anatolij Gustschin <agust@...x.de>
---
.../bindings/fpga/altera-passive-serial.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
diff --git a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
new file mode 100644
index 000000000000..3e240b281f21
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
@@ -0,0 +1,29 @@
+Altera Passive Serial SPI FPGA Manager
+
+Altera FPGAs support a method of loading the bitstream over what is
+referred to as "passive serial".
+The passive serial link is not technically SPI, and might require extra
+circuits in order to play nicely with other SPI slaves on the same bus.
+
+See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
+
+Required properties:
+- compatible: Must be one of the following:
+ "altr,fpga-passive-serial",
+ "altr,fpga-arria10-passive-serial"
+- reg: SPI chip select of the FPGA
+- nconfig-gpios: config pin (referred to as nCONFIG in the manual)
+- nstat-gpios: status pin (referred to as nSTATUS in the manual)
+
+Optional properties:
+- confd-gpios: confd pin (referred to as CONF_DONE in the manual)
+
+Example:
+ fpga_spi: evi-fpga-spi@0 {
+ compatible = "altr,fpga-passive-serial";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ };
--
2.11.0
Powered by blists - more mailing lists