| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170526001630.19203-3-mcgrof@kernel.org>
Date: Thu, 25 May 2017 17:16:27 -0700
From: "Luis R. Rodriguez" <mcgrof@...nel.org>
To: akpm@...ux-foundation.org, jeyu@...hat.com, shuah@...nel.org,
rusty@...tcorp.com.au, ebiederm@...ssion.com,
dmitry.torokhov@...il.com, acme@...hat.com, corbet@....net
Cc: martin.wilck@...e.com, mmarek@...e.com, pmladek@...e.com,
hare@...e.com, rwright@....com, jeffm@...e.com, DSterba@...e.com,
fdmanana@...e.com, neilb@...e.com, linux@...ck-us.net,
rgoldwyn@...e.com, subashab@...eaurora.org, xypron.glpk@....de,
keescook@...omium.org, atomlin@...hat.com, mbenes@...e.cz,
paulmck@...ux.vnet.ibm.com, dan.j.williams@...el.com,
jpoimboe@...hat.com, davem@...emloft.net, mingo@...hat.com,
alan@...ux.intel.com, tytso@....edu, gregkh@...uxfoundation.org,
torvalds@...ux-foundation.org, linux-kselftest@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
"Luis R. Rodriguez" <mcgrof@...nel.org>
Subject: [PATCH v2 2/5] kmod: reduce atomic operations on kmod_concurrent
When checking if we want to allow a kmod thread to kick off we increment,
then read to see if we should enable a thread. If we were over the allowed
limit limit we decrement. Splitting the increment far apart from decrement
means there could be a time where two increments happen potentially
giving a false failure on a thread which should have been allowed.
CPU1 CPU2
atomic_inc()
atomic_inc()
atomic_read()
atomic_read()
atomic_dec()
atomic_dec()
In this case a read on CPU1 gets the atomic_inc()'s and we could negate
it from getting a kmod thread. We could try to prevent this with a lock
or preemption but that is overkill. We can fix by reducing the number of
atomic operations. We do this by inverting the logic of of the enabler,
instead of incrementing kmod_concurrent as we get new kmod users, define the
variable kmod_concurrent_max as the max number of currently allowed kmod
users and as we get new kmod users just decrement it if its still positive.
This combines the dec and read in one atomic operation.
In this case we no longer get the same false failure:
CPU1 CPU2
atomic_dec_if_positive()
atomic_dec_if_positive()
atomic_inc()
atomic_inc()
Suggested-by: Petr Mladek <pmladek@...e.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@...nel.org>
---
include/linux/kmod.h | 2 ++
init/main.c | 1 +
kernel/kmod.c | 44 +++++++++++++++++++++++++-------------------
3 files changed, 28 insertions(+), 19 deletions(-)
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index c4e441e00db5..8e2f302b214a 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -38,10 +38,12 @@ int __request_module(bool wait, const char *name, ...);
#define request_module_nowait(mod...) __request_module(false, mod)
#define try_then_request_module(x, mod...) \
((x) ?: (__request_module(true, mod), (x)))
+void init_kmod_umh(void);
#else
static inline int request_module(const char *name, ...) { return -ENOSYS; }
static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; }
#define try_then_request_module(x, mod...) (x)
+static inline void init_kmod_umh(void) { }
#endif
diff --git a/init/main.c b/init/main.c
index 9ec09ff8a930..9b20be716cf7 100644
--- a/init/main.c
+++ b/init/main.c
@@ -650,6 +650,7 @@ asmlinkage __visible void __init start_kernel(void)
thread_stack_cache_init();
cred_init();
fork_init();
+ init_kmod_umh();
proc_caches_init();
buffer_init();
key_init();
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 563f97e2be36..cafd27b92d19 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -46,6 +46,7 @@
#include <trace/events/module.h>
extern int max_threads;
+unsigned int max_modprobes;
#define CAP_BSET (void *)1
#define CAP_PI (void *)2
@@ -56,6 +57,8 @@ static DEFINE_SPINLOCK(umh_sysctl_lock);
static DECLARE_RWSEM(umhelper_sem);
#ifdef CONFIG_MODULES
+static atomic_t kmod_concurrent_max = ATOMIC_INIT(0);
+#define MAX_KMOD_CONCURRENT 50 /* Completely arbitrary value - KAO */
/*
modprobe_path is set via /proc/sys.
@@ -127,10 +130,7 @@ int __request_module(bool wait, const char *fmt, ...)
{
va_list args;
char module_name[MODULE_NAME_LEN];
- unsigned int max_modprobes;
int ret;
- static atomic_t kmod_concurrent = ATOMIC_INIT(0);
-#define MAX_KMOD_CONCURRENT 50 /* Completely arbitrary value - KAO */
static int kmod_loop_msg;
/*
@@ -154,21 +154,7 @@ int __request_module(bool wait, const char *fmt, ...)
if (ret)
return ret;
- /* If modprobe needs a service that is in a module, we get a recursive
- * loop. Limit the number of running kmod threads to max_threads/2 or
- * MAX_KMOD_CONCURRENT, whichever is the smaller. A cleaner method
- * would be to run the parents of this process, counting how many times
- * kmod was invoked. That would mean accessing the internals of the
- * process tables to get the command line, proc_pid_cmdline is static
- * and it is not worth changing the proc code just to handle this case.
- * KAO.
- *
- * "trace the ppid" is simple, but will fail if someone's
- * parent exits. I think this is as good as it gets. --RR
- */
- max_modprobes = min(max_threads/2, MAX_KMOD_CONCURRENT);
- atomic_inc(&kmod_concurrent);
- if (atomic_read(&kmod_concurrent) > max_modprobes) {
+ if (atomic_dec_if_positive(&kmod_concurrent_max) < 0) {
/* We may be blaming an innocent here, but unlikely */
if (kmod_loop_msg < 5) {
printk(KERN_ERR
@@ -184,10 +170,30 @@ int __request_module(bool wait, const char *fmt, ...)
ret = call_modprobe(module_name, wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC);
- atomic_dec(&kmod_concurrent);
+ atomic_inc(&kmod_concurrent_max);
+
return ret;
}
EXPORT_SYMBOL(__request_module);
+
+/*
+ * If modprobe needs a service that is in a module, we get a recursive
+ * loop. Limit the number of running kmod threads to max_threads/2 or
+ * MAX_KMOD_CONCURRENT, whichever is the smaller. A cleaner method
+ * would be to run the parents of this process, counting how many times
+ * kmod was invoked. That would mean accessing the internals of the
+ * process tables to get the command line, proc_pid_cmdline is static
+ * and it is not worth changing the proc code just to handle this case.
+ *
+ * "trace the ppid" is simple, but will fail if someone's
+ * parent exits. I think this is as good as it gets.
+ */
+void __init init_kmod_umh(void)
+{
+ max_modprobes = min(max_threads/2, MAX_KMOD_CONCURRENT);
+ atomic_set(&kmod_concurrent_max, max_modprobes);
+}
+
#endif /* CONFIG_MODULES */
static void call_usermodehelper_freeinfo(struct subprocess_info *info)
--
2.11.0
Powered by blists - more mailing lists