linux-kernel - [PATCH v4 06/11] drm/sun4i: tcon: multiply the vtotal when not in interlace

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <288881a7a27fbf9f0ca20ad574314c537b975560.1495900658.git-series.maxime.ripard@free-electrons.com>
Date:   Sat, 27 May 2017 18:09:31 +0200
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Chen-Yu Tsai <wens@...e.org>,
        Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc:     Daniel Vetter <daniel.vetter@...el.com>,
        David Airlie <airlied@...ux.ie>,
        dri-devel@...ts.freedesktop.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...glegroups.com, Hans Verkuil <hverkuil@...all.nl>
Subject: [PATCH v4 06/11] drm/sun4i: tcon: multiply the vtotal when not in interlace

It appears that the total vertical resolution needs to be doubled when
we're not in interlaced. Make sure that is the case.

Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 61e1de77831d..d9791292553e 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -229,7 +229,7 @@ EXPORT_SYMBOL(sun4i_tcon0_mode_set);
 void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 			  struct drm_display_mode *mode)
 {
-	unsigned int bp, hsync, vsync;
+	unsigned int bp, hsync, vsync, vtotal;
 	u8 clk_delay;
 	u32 val;
 
@@ -276,12 +276,30 @@ void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 		     SUN4I_TCON1_BASIC3_H_TOTAL(mode->crtc_htotal) |
 		     SUN4I_TCON1_BASIC3_H_BACKPORCH(bp));
 
-	/* Set vertical display timings */
 	bp = mode->crtc_vtotal - mode->crtc_vsync_start;
 	DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
-			 mode->vtotal, bp);
+			 mode->crtc_vtotal, bp);
+
+	/*
+	 * The vertical resolution needs to be doubled in all
+	 * cases. We could use crtc_vtotal and always multiply by two,
+	 * but that leads to a rounding error in interlace when vtotal
+	 * is odd.
+	 *
+	 * This happens with TV's PAL for example, where vtotal will
+	 * be 625, crtc_vtotal 312, and thus crtc_vtotal * 2 will be
+	 * 624, which apparently confuses the hardware.
+	 *
+	 * To work around this, we will always use vtotal, and
+	 * multiply by two only if we're not in interlace.
+	 */
+	vtotal = mode->vtotal;
+	if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
+		vtotal = vtotal * 2;
+
+	/* Set vertical display timings */
 	regmap_write(tcon->regs, SUN4I_TCON1_BASIC4_REG,
-		     SUN4I_TCON1_BASIC4_V_TOTAL(mode->vtotal) |
+		     SUN4I_TCON1_BASIC4_V_TOTAL(vtotal) |
 		     SUN4I_TCON1_BASIC4_V_BACKPORCH(bp));
 
 	/* Set Hsync and Vsync length */
-- 
git-series 0.9.1