[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1496059045-13572-7-git-send-email-stefan.wahren@i2se.com>
Date: Mon, 29 May 2017 13:57:14 +0200
From: Stefan Wahren <stefan.wahren@...e.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"David S. Miller" <davem@...emloft.net>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Lino Sanfilippo <LinoSanfilippo@....de>,
Jakub Kicinski <kubakici@...pl>, devicetree@...r.kernel.org,
netdev@...r.kernel.org, linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org,
Stefan Wahren <stefan.wahren@...e.com>
Subject: [PATCH v8 net-next 06/17] net: qualcomm: Improve readability of length defines
In order to avoid mixing things up, make the MTU and frame length
defines easier to read.
Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
---
drivers/net/ethernet/qualcomm/qca_framing.c | 2 +-
drivers/net/ethernet/qualcomm/qca_framing.h | 8 ++++----
drivers/net/ethernet/qualcomm/qca_spi.c | 12 ++++++------
3 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/qca_framing.c b/drivers/net/ethernet/qualcomm/qca_framing.c
index faa924c..2341f2b 100644
--- a/drivers/net/ethernet/qualcomm/qca_framing.c
+++ b/drivers/net/ethernet/qualcomm/qca_framing.c
@@ -117,7 +117,7 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by
break;
case QCAFRM_WAIT_RSVD_BYTE2:
len = handle->offset;
- if (len > buf_len || len < QCAFRM_ETHMINLEN) {
+ if (len > buf_len || len < QCAFRM_MIN_LEN) {
ret = QCAFRM_INVLEN;
handle->state = QCAFRM_HW_LEN0;
} else {
diff --git a/drivers/net/ethernet/qualcomm/qca_framing.h b/drivers/net/ethernet/qualcomm/qca_framing.h
index 8b385e6..5df7c65 100644
--- a/drivers/net/ethernet/qualcomm/qca_framing.h
+++ b/drivers/net/ethernet/qualcomm/qca_framing.h
@@ -44,12 +44,12 @@
#define QCAFRM_INVFRAME (QCAFRM_ERR_BASE - 4)
/* Min/Max Ethernet MTU: 46/1500 */
-#define QCAFRM_ETHMINMTU (ETH_ZLEN - ETH_HLEN)
-#define QCAFRM_ETHMAXMTU ETH_DATA_LEN
+#define QCAFRM_MIN_MTU (ETH_ZLEN - ETH_HLEN)
+#define QCAFRM_MAX_MTU ETH_DATA_LEN
/* Min/Max frame lengths */
-#define QCAFRM_ETHMINLEN (QCAFRM_ETHMINMTU + ETH_HLEN)
-#define QCAFRM_ETHMAXLEN (QCAFRM_ETHMAXMTU + VLAN_ETH_HLEN)
+#define QCAFRM_MIN_LEN (QCAFRM_MIN_MTU + ETH_HLEN)
+#define QCAFRM_MAX_LEN (QCAFRM_MAX_MTU + VLAN_ETH_HLEN)
/* QCA7K header len */
#define QCAFRM_HEADER_LEN 8
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 7e039e3..f155548 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -69,7 +69,7 @@ static int qcaspi_pluggable = QCASPI_PLUGGABLE_MIN;
module_param(qcaspi_pluggable, int, 0);
MODULE_PARM_DESC(qcaspi_pluggable, "Pluggable SPI connection (yes/no).");
-#define QCASPI_MTU QCAFRM_ETHMAXMTU
+#define QCASPI_MTU QCAFRM_MAX_MTU
#define QCASPI_TX_TIMEOUT (1 * HZ)
#define QCASPI_QCA7K_REBOOT_TIME_MS 1000
@@ -403,7 +403,7 @@ qcaspi_tx_ring_has_space(struct tx_ring *txr)
if (txr->skb[txr->tail])
return 0;
- return (txr->size + QCAFRM_ETHMAXLEN < QCASPI_HW_BUF_LEN) ? 1 : 0;
+ return (txr->size + QCAFRM_MAX_LEN < QCASPI_HW_BUF_LEN) ? 1 : 0;
}
/* Flush the tx ring. This function is only safe to
@@ -667,8 +667,8 @@ qcaspi_netdev_xmit(struct sk_buff *skb, struct net_device *dev)
struct sk_buff *tskb;
u8 pad_len = 0;
- if (skb->len < QCAFRM_ETHMINLEN)
- pad_len = QCAFRM_ETHMINLEN - skb->len;
+ if (skb->len < QCAFRM_MIN_LEN)
+ pad_len = QCAFRM_MIN_LEN - skb->len;
if (qca->txr.skb[qca->txr.tail]) {
netdev_warn(qca->net_dev, "queue was unexpectedly full!\n");
@@ -805,8 +805,8 @@ qcaspi_netdev_setup(struct net_device *dev)
dev->tx_queue_len = 100;
/* MTU range: 46 - 1500 */
- dev->min_mtu = QCAFRM_ETHMINMTU;
- dev->max_mtu = QCAFRM_ETHMAXMTU;
+ dev->min_mtu = QCAFRM_MIN_MTU;
+ dev->max_mtu = QCAFRM_MAX_MTU;
qca = netdev_priv(dev);
memset(qca, 0, sizeof(struct qcaspi));
--
2.1.4
Powered by blists - more mailing lists