linux-kernel - Re: [PATCH v3 1/2] mmc: dw_mmc: Use device_property_read instead of of_property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAPDyKFrTf=GA=NVzXRp8bQAnP3YyyHMJ5YaA6ip-jJs=58uZNQ@mail.gmail.com>
Date:   Mon, 29 May 2017 16:42:30 +0200
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     David Woods <dwoods@...lanox.com>
Cc:     Jaehoon Chung <jh80.chung@...sung.com>,
        Shawn Lin <shawn.lin@...k-chips.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Adrian Hunter <adrian.hunter@...el.com>, cmetcalf@...lanox.com,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        stable@...r.linux.org
Subject: Re: [PATCH v3 1/2] mmc: dw_mmc: Use device_property_read instead of of_property_read

On 26 May 2017 at 23:53, David Woods <dwoods@...lanox.com> wrote:
> Using the device_property interfaces allows the dw_mmc driver to work
> on platforms which run on either device tree or ACPI.
>
> Signed-off-by: David Woods <dwoods@...lanox.com>
> Reviewed-by: Chris Metcalf <cmetcalf@...lanox.com>
> Cc: stable@...r.linux.org

Thanks, applied for next!

Kind regards
Uffe

> ---
>  drivers/mmc/host/dw_mmc.c | 24 ++++++++++++------------
>  1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index e45129f..efde0f2 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2707,8 +2707,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>         host->slot[id] = slot;
>
>         mmc->ops = &dw_mci_ops;
> -       if (of_property_read_u32_array(host->dev->of_node,
> -                                      "clock-freq-min-max", freq, 2)) {
> +       if (device_property_read_u32_array(host->dev, "clock-freq-min-max",
> +                                          freq, 2)) {
>                 mmc->f_min = DW_MCI_FREQ_MIN;
>                 mmc->f_max = DW_MCI_FREQ_MAX;
>         } else {
> @@ -2808,7 +2808,6 @@ static void dw_mci_init_dma(struct dw_mci *host)
>  {
>         int addr_config;
>         struct device *dev = host->dev;
> -       struct device_node *np = dev->of_node;
>
>         /*
>         * Check tansfer mode from HCON[17:16]
> @@ -2869,8 +2868,9 @@ static void dw_mci_init_dma(struct dw_mci *host)
>                 dev_info(host->dev, "Using internal DMA controller.\n");
>         } else {
>                 /* TRANS_MODE_EDMAC: check dma bindings again */
> -               if ((of_property_count_strings(np, "dma-names") < 0) ||
> -                   (!of_find_property(np, "dmas", NULL))) {
> +               if ((device_property_read_string_array(dev, "dma-names",
> +                                                      NULL, 0) < 0) ||
> +                   !device_property_present(dev, "dmas")) {
>                         goto no_dma;
>                 }
>                 host->dma_ops = &dw_mci_edmac_ops;
> @@ -2937,7 +2937,6 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
>  {
>         struct dw_mci_board *pdata;
>         struct device *dev = host->dev;
> -       struct device_node *np = dev->of_node;
>         const struct dw_mci_drv_data *drv_data = host->drv_data;
>         int ret;
>         u32 clock_frequency;
> @@ -2954,20 +2953,21 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
>         }
>
>         /* find out number of slots supported */
> -       of_property_read_u32(np, "num-slots", &pdata->num_slots);
> +       device_property_read_u32(dev, "num-slots", &pdata->num_slots);
>
> -       if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
> +       if (device_property_read_u32(dev, "fifo-depth", &pdata->fifo_depth))
>                 dev_info(dev,
>                          "fifo-depth property not found, using value of FIFOTH register as default\n");
>
> -       of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
> +       device_property_read_u32(dev, "card-detect-delay",
> +                                &pdata->detect_delay_ms);
>
> -       of_property_read_u32(np, "data-addr", &host->data_addr_override);
> +       device_property_read_u32(dev, "data-addr", &host->data_addr_override);
>
> -       if (of_get_property(np, "fifo-watermark-aligned", NULL))
> +       if (device_property_present(dev, "fifo-watermark-aligned"))
>                 host->wm_aligned = true;
>
> -       if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
> +       if (!device_property_read_u32(dev, "clock-frequency", &clock_frequency))
>                 pdata->bus_hz = clock_frequency;
>
>         if (drv_data && drv_data->parse_dt) {
> --
> 2.7.2
>