[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170529170924.25488-5-o.rempel@pengutronix.de>
Date: Mon, 29 May 2017 19:09:24 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: linux@...pel-orivat.de
Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
linux-arm-kernel@...ts.infradead.org,
Shawn Guo <shawnguo@...nel.org>,
Fabio Estevam <fabio.estevam@....com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v1 5/5] ARM: dts: imx6: RIoTboard provide Standby to PowerOff option
This board, as well as some other boards with i.MX6 and a PMIC, uses a
"MPIC_STBY_REQ" line to notify the PMIC about a state change.
The PMIC is programmed for a specific state change before triggering the
line.
In this case, PMIC_STBY_REQ can be used for Stand by, Sleep
and Power off modes.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: kernel@...gutronix.de
Cc: linux-arm-kernel@...ts.infradead.org
Cc: Shawn Guo <shawnguo@...nel.org>
Cc: Fabio Estevam <fabio.estevam@....com>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Russell King <linux@...linux.org.uk>
Cc: devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
---
arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2cb72824e800..b5f25fe7b809 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,10 @@
status = "okay";
};
+&clks {
+ fsl,pmic_stby_poweroff;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -125,6 +129,7 @@
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <16 8>;
+ fsl,pmic_stby_poweroff;
regulators {
reg_vddcore: sw1ab { /* VDDARM_IN */
--
2.11.0
Powered by blists - more mailing lists