| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170529073428.f5os7g5e666v4xnp@wens.csie.org>
Date: Mon, 29 May 2017 15:34:28 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Icenowy Zheng <icenowy@...c.io>
Cc: Chen-Yu Tsai <wens@...e.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
linux-doc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org
Subject: Re: [PATCH v3 08/10] clk: sunxi-ng: support R40 SoC
Hi,
On Sat, May 27, 2017 at 06:23:06PM +0800, Icenowy Zheng wrote:
> Allwinner R40 SoC have a clock controller module in the style of the
> SoCs beyond sun6i, however, it's more rich and complex.
>
> Add support for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> ---
> Changes in v3:
> - Rebased on current linux-next.
> Changes in v2:
> - Fixes according to the SoC's user manual.
>
> drivers/clk/sunxi-ng/Kconfig | 10 +
> drivers/clk/sunxi-ng/Makefile | 1 +
> drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1153 +++++++++++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 68 ++
> include/dt-bindings/clock/sun8i-r40-ccu.h | 191 +++++
> include/dt-bindings/reset/sun8i-r40-ccu.h | 129 ++++
> 6 files changed, 1552 insertions(+)
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
> create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
> create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
>
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
> index 67acef3d2494..c11ad3375907 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -157,6 +157,16 @@ config SUN8I_DE2_CCU
> select SUNXI_CCU_DIV
> select SUNXI_CCU_GATE
>
> +config SUN8I_R40_CCU
> + bool "Support for the Allwinner R40 CCU"
> + select SUNXI_CCU_DIV
> + select SUNXI_CCU_NK
> + select SUNXI_CCU_NKM
> + select SUNXI_CCU_NKMP
> + select SUNXI_CCU_NM
> + select SUNXI_CCU_MP
You seem to be missing a few, such as CCU_GATE, CCU_MUX, CCU_PHASE.
The list should at least be the same as the included headers.
> + default MACH_SUN8I
> +
> config SUN9I_A80_CCU
> bool "Support for the Allwinner A80 CCU"
> select SUNXI_CCU_DIV
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index 0185c6ffadcb..217db667a994 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
> obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
> obj-$(CONFIG_SUN8I_DE2_CCU) += ccu-sun8i-de2.o
> obj-$(CONFIG_SUN8I_R_CCU) += ccu-sun8i-r.o
> +obj-$(CONFIG_SUN8I_R40_CCU) += ccu-sun8i-r40.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
> new file mode 100644
> index 000000000000..484a8956f59c
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
> @@ -0,0 +1,1153 @@
> +/*
> + * Copyright (c) 2017 Icenowy Zheng <icenowy@...c.io>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_mp.h"
> +#include "ccu_mult.h"
> +#include "ccu_nk.h"
> +#include "ccu_nkm.h"
> +#include "ccu_nkmp.h"
> +#include "ccu_nm.h"
> +#include "ccu_phase.h"
> +
> +#include "ccu-sun8i-r40.h"
> +
> +static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
> + "osc24M", 0x000,
> + 8, 5, /* N */
> + 4, 2, /* K */
> + 0, 2, /* M */
> + 16, 2, /* P */
P does not do /8. Please add a limit.
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +/*
> + * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
> + * the base (2x, 4x and 8x), and one variable divider (the one true
> + * pll audio).
> + *
> + * We don't have any need for the variable divider for now, so we just
> + * hardcode it to match with the clock names
> + */
> +#define SUN8I_R40_PLL_AUDIO_REG 0x008
> +
> +static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
> + "osc24M", 0x008,
> + 8, 7, /* N */
> + 0, 5, /* M */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
> + "osc24M", 0x0010,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
> + "osc24M", 0x0018,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
> + "osc24M", 0x020,
> + 8, 5, /* N */
> + 4, 2, /* K */
> + 0, 2, /* M */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +/* According to the BSP driver, pll-periph{0,1} have M at 0:1 */
This is also mentioned in the user manual. You can leave it out.
Also, please leave a note mentioning that support for the SATA clock
output of the peripheral PLL is not implemented here.
> +static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph0_clk, "pll-periph0",
> + "osc24M", 0x028,
> + 8, 5, /* N */
> + 4, 2, /* K */
> + 0, 2, /* M */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph1_clk, "pll-periph1",
> + "osc24M", 0x02c,
> + 8, 5, /* N */
> + 4, 2, /* K */
> + 0, 2, /* M */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
> + "osc24M", 0x030,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + CLK_SET_RATE_UNGATE);
Why do you have this set for only some of the PLLs? Either you need it
for all of them, or you don't need it for any of them.
> +
> +/*
> + * For the special bit in gate part, please see the BSP source code at
> + * https://github.com/BPI-SINOVOIP/BPI-M2U-bsp/blob/master/linux-sunxi/drivers/clk/sunxi/clk-sun8iw11.c#L665
> + */
> +static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_sata_clk, "pll-sata",
> + "osc24M", 0x034,
> + 8, 5, /* N */
> + 4, 2, /* K */
> + 0, 2, /* M */
> + BIT(31) | BIT(14), /* gate */
> + BIT(28), /* lock */
> + 0);
I think this is a somewhat simplified approach. From what I understand
of the user manual, the SATA clock path look like:
[ PLL-PERIPH0-SATA ] -\
mux @ 0x34 bit 30 --- gate @ 0x34 bit 14 --- ...
[ PLL-SATA ] ---------/
... from above ... ------\
mux @ 0xc8 bit 24 --- gate @ 0xc8 bit 31
[ external oscillator ] -/
If you choose to simplify the implementation, please include a detailed
note as to why you chose to do so, and the validity of the simplification.
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
> + "osc24M", 0x038,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static const char * const pll_mipi_parents[] = { "pll-video0", "pll-video1" };
pll-video1 is not listed in the manual.
> +static SUNXI_CCU_NKM_WITH_MUX_GATE_LOCK(pll_mipi_clk, "pll-mipi",
> + pll_mipi_parents, 0x040,
> + 8, 4, /* N */
> + 4, 2, /* K */
> + 0, 4, /* M */
> + 21, 0, /* mux */
> + BIT(31) | BIT(23) | BIT(22), /* gate */
> + BIT(28), /* lock */
> + CLK_SET_RATE_UNGATE);
Please leave a note mentioning that you only implement support for the "MIPI" mode.
You should also force it at probe time. See the driver for the A31.
> +
> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
> + "osc24M", 0x0048,
> + 8, 7, /* N */
> + 0, 4, /* M */
> + BIT(24), /* frac enable */
> + BIT(25), /* frac select */
> + 270000000, /* frac rate 0 */
> + 297000000, /* frac rate 1 */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + 0);
> +
> +static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
> + "osc24M", 0x04c,
> + 8, 7, /* N */
N has minimum and maximum limits.
> + 0, 2, /* M */
> + BIT(31), /* gate */
> + BIT(28), /* lock */
> + CLK_SET_RATE_UNGATE);
> +
> +static const char * const cpu_parents[] = { "osc32k", "osc24M",
> + "pll-cpu", "pll-cpu" };
> +static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
> + 0x050, 16, 2, CLK_IS_CRITICAL);
> +
> +static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
> +
> +static const char * const ahb1_parents[] = { "osc32k", "osc24M",
> + "axi", "pll-periph0" };
> +static const struct ccu_mux_var_prediv ahb1_predivs[] = {
> + { .index = 3, .shift = 6, .width = 2 },
> +};
> +static struct ccu_div ahb1_clk = {
> + .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
> +
> + .mux = {
> + .shift = 12,
> + .width = 2,
> +
> + .var_predivs = ahb1_predivs,
> + .n_var_predivs = ARRAY_SIZE(ahb1_predivs),
> + },
> +
> + .common = {
> + .reg = 0x054,
> + .features = CCU_FEATURE_VARIABLE_PREDIV,
> + .hw.init = CLK_HW_INIT_PARENTS("ahb1",
> + ahb1_parents,
> + &ccu_div_ops,
> + 0),
> + },
> +};
> +
> +static struct clk_div_table apb1_div_table[] = {
> + { .val = 0, .div = 2 },
> + { .val = 1, .div = 2 },
> + { .val = 2, .div = 4 },
> + { .val = 3, .div = 8 },
> + { /* Sentinel */ },
> +};
> +static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
> + 0x054, 8, 2, apb1_div_table, 0);
> +
> +static const char * const apb2_parents[] = { "osc32k", "osc24M",
> + "pll-periph0-2x",
> + "pll-periph0-2x" };
> +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
> + 0, 5, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1",
> + 0x060, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
> + 0x060, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
> + 0x060, BIT(6), 0);
> +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
> + 0x060, BIT(8), 0);
> +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
> + 0x060, BIT(9), 0);
> +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
> + 0x060, BIT(10), 0);
> +static SUNXI_CCU_GATE(bus_mmc3_clk, "bus-mmc3", "ahb1",
> + 0x060, BIT(11), 0);
> +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
> + 0x060, BIT(13), 0);
> +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
> + 0x060, BIT(14), 0);
> +static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb1",
> + 0x060, BIT(17), 0);
> +static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
> + 0x060, BIT(18), 0);
> +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
> + 0x060, BIT(19), 0);
> +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
> + 0x060, BIT(20), 0);
> +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
> + 0x060, BIT(21), 0);
> +static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb1",
> + 0x060, BIT(22), 0);
> +static SUNXI_CCU_GATE(bus_spi3_clk, "bus-spi3", "ahb1",
> + 0x060, BIT(23), 0);
> +static SUNXI_CCU_GATE(bus_sata_clk, "bus-sata", "ahb1",
> + 0x060, BIT(24), 0);
> +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
> + 0x060, BIT(25), 0);
> +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
> + 0x060, BIT(26), 0);
> +static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb1",
> + 0x060, BIT(27), 0);
> +static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb1",
> + 0x060, BIT(28), 0);
> +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
> + 0x060, BIT(29), 0);
> +static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb1",
> + 0x060, BIT(30), 0);
> +static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb1",
> + 0x060, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
> + 0x064, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_de_mp_clk, "bus-de-mp", "ahb1",
> + 0x064, BIT(2), 0);
The mixer processor is unrelated to the display engine.
Please drop the "de" part of the name.
> +static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
> + 0x064, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_csi0_clk, "bus-csi0", "ahb1",
> + 0x064, BIT(8), 0);
> +static SUNXI_CCU_GATE(bus_csi1_clk, "bus-csi1", "ahb1",
> + 0x064, BIT(9), 0);
> +static SUNXI_CCU_GATE(bus_hdmi_slow_clk, "bus-hdmi-slow", "ahb1",
> + 0x064, BIT(10), 0);
> +static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
> + 0x064, BIT(11), 0);
Please stick to the names in the user manual.
They are hdmi0 and hdmi1.
> +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
> + 0x064, BIT(12), 0);
> +static SUNXI_CCU_GATE(bus_tve0_clk, "bus-tve0", "ahb1",
> + 0x064, BIT(13), 0);
> +static SUNXI_CCU_GATE(bus_tve1_clk, "bus-tve1", "ahb1",
> + 0x064, BIT(14), 0);
> +static SUNXI_CCU_GATE(bus_tve_top_clk, "bus-tve-top", "ahb1",
> + 0x064, BIT(15), 0);
> +static SUNXI_CCU_GATE(bus_gmac_clk, "bus-gmac", "ahb1",
> + 0x064, BIT(17), 0);
> +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
> + 0x064, BIT(20), 0);
> +static SUNXI_CCU_GATE(bus_tvd0_clk, "bus-tvd0", "ahb1",
> + 0x064, BIT(21), 0);
> +static SUNXI_CCU_GATE(bus_tvd1_clk, "bus-tvd1", "ahb1",
> + 0x064, BIT(22), 0);
> +static SUNXI_CCU_GATE(bus_tvd2_clk, "bus-tvd2", "ahb1",
> + 0x064, BIT(23), 0);
> +static SUNXI_CCU_GATE(bus_tvd3_clk, "bus-tvd3", "ahb1",
> + 0x064, BIT(24), 0);
> +static SUNXI_CCU_GATE(bus_tvd_top_clk, "bus-tvd-top", "ahb1",
> + 0x064, BIT(25), 0);
> +static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
> + 0x064, BIT(26), 0);
> +static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
> + 0x064, BIT(27), 0);
> +static SUNXI_CCU_GATE(bus_tve0_tcon_clk, "bus-tve0-tcon", "ahb1",
> + 0x064, BIT(28), 0);
> +static SUNXI_CCU_GATE(bus_tve1_tcon_clk, "bus-tve1-tcon", "ahb1",
> + 0x064, BIT(29), 0);
Please stick to the names used in the user manual.
They are "tcon-lcdN" and "tcon-tvN".
> +static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb1",
> + 0x064, BIT(30), 0);
> +
> +static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
> + 0x068, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
> + 0x068, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_ac97_clk, "bus-ac97", "apb1",
> + 0x068, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
> + 0x068, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_ir0_clk, "bus-ir0", "apb1",
> + 0x068, BIT(6), 0);
> +static SUNXI_CCU_GATE(bus_ir1_clk, "bus-ir1", "apb1",
> + 0x068, BIT(7), 0);
> +static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
> + 0x068, BIT(8), 0);
> +static SUNXI_CCU_GATE(bus_keypad_clk, "bus-keypad", "apb1",
> + 0x068, BIT(10), 0);
> +static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
> + 0x068, BIT(12), 0);
> +static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
> + 0x068, BIT(13), 0);
> +static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
> + 0x068, BIT(14), 0);
> +
> +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
> + 0x06c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
> + 0x06c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
> + 0x06c, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2",
> + 0x06c, BIT(3), 0);
> +/*
> + * In datasheet here's "Reserved", however the gate exists in BSP soucre
> + * code.
> + */
> +static SUNXI_CCU_GATE(bus_can_clk, "bus-can", "apb2",
> + 0x06c, BIT(4), 0);
> +static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
> + 0x06c, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_ps20_clk, "bus-ps20", "apb2",
> + 0x06c, BIT(6), 0);
> +static SUNXI_CCU_GATE(bus_ps21_clk, "bus-ps21", "apb2",
> + 0x06c, BIT(7), 0);
> +static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2",
> + 0x06c, BIT(15), 0);
> +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
> + 0x06c, BIT(16), 0);
> +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
> + 0x06c, BIT(17), 0);
> +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
> + 0x06c, BIT(18), 0);
> +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
> + 0x06c, BIT(19), 0);
> +static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2",
> + 0x06c, BIT(20), 0);
> +static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2",
> + 0x06c, BIT(21), 0);
> +static SUNXI_CCU_GATE(bus_uart6_clk, "bus-uart6", "apb2",
> + 0x06c, BIT(22), 0);
> +static SUNXI_CCU_GATE(bus_uart7_clk, "bus-uart7", "apb2",
> + 0x06c, BIT(23), 0);
> +
> +/* Educated guess: the BSP clock driver do not have this clock */
The gate is documented in the user manual. What part is a guess?
> +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
> + 0x070, BIT(7), 0);
> +
> +static SUNXI_CCU_M_WITH_GATE(ths_clk, "ths", "osc24M",
> + 0x074, 0, 2, BIT(31), 0);
This clock has a mux. Even with only one parent, you should still
implement the mux, so the kernel can recover from cases where some
other piece of software left it in a bad state.
Also the divider is of the power of two type.
> +
> +static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
> + "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
The mux is 4 bits wide.
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x",
> + "pll-periph1-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0ac,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
> + "pll-audio-2x", "pll-audio" };
> +static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
> + 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
> + 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
> + 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", i2s_parents,
> + 0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_parents,
> + 0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
> +
> +static const char * const keypad_parents[] = { "osc24M", "osc32k", };
The parents are not sequential. You need a mux table here.
> +static SUNXI_CCU_MP_WITH_MUX_GATE(keypad_clk, "keypad", keypad_parents, 0x0c4,
> + 0, 5, /* M */
> + 16, 2, /* P */
> + 25, 1, /* mux */
Mux is 2 bits wide.
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const sata_parents[] = { "pll-sata", "sata-ext", };
> +static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
> + 0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
> + 0x0cc, BIT(8), 0);
> +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
> + 0x0cc, BIT(9), 0);
> +static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M",
> + 0x0cc, BIT(10), 0);
> +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
> + 0x0cc, BIT(16), 0);
> +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc24M",
> + 0x0cc, BIT(17), 0);
> +static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc24M",
> + 0x0cc, BIT(18), 0);
Why bother with the 3 clocks below, if you aren't going to use them as parents
for the 3 usb-ohci gates above? The user manual states the gates are for both
48M and 12M clocks.
> +
> +static const char * const usb_ohci12m_parents[] = { "osc24M-2x", "osc24M",
> + "osc32k" };
You should have pre-dividers here so the clk subsystem can report correct
clk rates.
> +static SUNXI_CCU_MUX(usb_ohci0_12m_clk, "usb-ohci0-12m", usb_ohci12m_parents,
> + 0x0cc, 20, 2, 0);
> +static SUNXI_CCU_MUX(usb_ohci1_12m_clk, "usb-ohci1-12m", usb_ohci12m_parents,
> + 0x0cc, 22, 2, 0);
> +static SUNXI_CCU_MUX(usb_ohci2_12m_clk, "usb-ohci2-12m", usb_ohci12m_parents,
> + 0x0cc, 24, 2, 0);
> +
> +static const char * const ir_parents[] = { "osc24M", "pll-periph0",
> + "pll-periph1", "osc32k" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_clk, "ir0", ir_parents, 0x0d0,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_clk, "ir1", ir_parents, 0x0d4,
> + 0, 4, /* M */
> + 16, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
> +static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
> + 0x0f4, 0, 2, 20, 2, CLK_IS_CRITICAL);
> +
> +static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
> + 0x100, BIT(0), 0);
> +static SUNXI_CCU_GATE(dram_csi0_clk, "dram-csi0", "dram",
> + 0x100, BIT(1), 0);
> +static SUNXI_CCU_GATE(dram_csi1_clk, "dram-csi1", "dram",
> + 0x100, BIT(2), 0);
> +static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
> + 0x100, BIT(3), 0);
> +static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "dram",
> + 0x100, BIT(4), 0);
> +static SUNXI_CCU_GATE(dram_de_mp_clk, "dram-de-mp", "dram",
> + 0x100, BIT(5), 0);
Same thing about the mixer processor as before.
> +static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
> + 0x100, BIT(6), 0);
> +
> +static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
> + 0x104, 0, 4, 24, 3, BIT(31), 0);
> +static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
> + 0x108, 0, 4, 24, 3, BIT(31), 0);
> +
> +static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
> + "pll-video0-2x", "pll-video1-2x",
> + "pll-mipi" };
> +static SUNXI_CCU_MUX_WITH_GATE(tcon0_clk, "tcon0", tcon_parents,
> + 0x110, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_MUX_WITH_GATE(tcon1_clk, "tcon1", tcon_parents,
> + 0x114, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve0_clk, "tcon-tve0", tcon_parents,
> + 0x118, 0, 4, 24, 3, BIT(31), 0);
> +static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve1_clk, "tcon-tve1", tcon_parents,
> + 0x11c, 0, 4, 24, 3, BIT(31), 0);
Again, please stick to the names used by the user manual.
> +
> +static const char * const deinterlace_parents[] = { "pll-periph0",
> + "pll-periph1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
> + deinterlace_parents, 0x124, 0, 4, 24, 3,
> + BIT(31), 0);
> +
> +static const char * const csi_mclk_parents[] = { "osc24M", "pll-video",
> + "pll-periph1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk", csi_mclk_parents,
> + 0x130, 0, 5, 8, 3, BIT(15), 0);
> +
> +static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
> + 0x134, 16, 4, 24, 3, BIT(31), 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
> + 0x134, 0, 5, 8, 3, BIT(15), 0);
> +
> +static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
> + 0x13c, 16, 3, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(adda_clk, "adda", "pll-audio",
> + 0x140, BIT(31), CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_GATE(adda_4x_clk, "adda-4x", "pll-audio-4x",
> + 0x140, BIT(30), CLK_SET_RATE_PARENT);
adda-4x is not listed in the user manual. Does it really exist?
Is it used anywhere?
> +static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
> + 0x144, BIT(31), 0);
> +
> +static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
> + 0x150, 0, 4, 24, 2, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M",
> + 0x154, BIT(31), 0);
> +
> +static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
> + "pll-ddr0" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x15c,
> + 0, 4, /* M */
> + 16, 2, /* P */
Curiously, the formula for clk rate calculation does not include this
factor.
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + CLK_IS_CRITICAL);
> +
> +static const char * const mipi_dsi_parents[] = { "pll-video0", "pll-video1",
> + "pll-periph0" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi", mipi_dsi_parents,
> + 0x168, 0, 4, 8, 2, BIT(15), 0);
This is called "dsi-dphy" in the user manual. Looking at the A31,
it had "dsi-sclk" in the upper 16 bits. So please use "dsi-dphy"
or "mipi-dsi-dphy" here.
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(tve0_clk, "tve0", tcon_parents,
> + 0x180, 0, 4, 24, 3, BIT(31), 0);
> +static SUNXI_CCU_M_WITH_MUX_GATE(tve1_clk, "tve1", tcon_parents,
> + 0x184, 0, 4, 24, 3, BIT(31), 0);
> +
> +static const char * const tvd_parents[] = { "pll-video0", "pll-video1",
> + "pll-video0-2x", "pll-video1-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(tvd0_clk, "tvd0", tvd_parents,
> + 0x188, 0, 4, 24, 2, BIT(31), 0);
> +static SUNXI_CCU_M_WITH_MUX_GATE(tvd1_clk, "tvd1", tvd_parents,
> + 0x18c, 0, 4, 24, 2, BIT(31), 0);
> +static SUNXI_CCU_M_WITH_MUX_GATE(tvd2_clk, "tvd2", tvd_parents,
> + 0x190, 0, 4, 24, 2, BIT(31), 0);
> +static SUNXI_CCU_M_WITH_MUX_GATE(tvd3_clk, "tvd3", tvd_parents,
> + 0x194, 0, 4, 24, 2, BIT(31), 0);
The mux is 3 bits wide for the tvd clocks.
> +
> +static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
> + 0x1a0, 0, 3, BIT(31), 0);
You should probably have CLK_SET_RATE_PARENT here.
> +
> +static const char * const out_parents[] = { "osc24M-32k", "osc32k", "osc24M" };
Please use pre-dividers instead of "osc24M-32k".
> +static SUNXI_CCU_MP_WITH_MUX_GATE(outa_clk, "outa", out_parents, 0x1f0,
> + 8, 5, /* M */
> + 20, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +static SUNXI_CCU_MP_WITH_MUX_GATE(outb_clk, "outb", out_parents, 0x1f4,
> + 8, 5, /* M */
> + 20, 2, /* P */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static struct ccu_common *sun8i_r40_ccu_clks[] = {
> + &pll_cpu_clk.common,
> + &pll_audio_base_clk.common,
> + &pll_video0_clk.common,
> + &pll_ve_clk.common,
> + &pll_ddr0_clk.common,
> + &pll_periph0_clk.common,
> + &pll_periph1_clk.common,
> + &pll_video1_clk.common,
> + &pll_sata_clk.common,
> + &pll_gpu_clk.common,
> + &pll_mipi_clk.common,
> + &pll_de_clk.common,
> + &pll_ddr1_clk.common,
> + &cpu_clk.common,
> + &axi_clk.common,
> + &ahb1_clk.common,
> + &apb1_clk.common,
> + &apb2_clk.common,
> + &bus_mipi_dsi_clk.common,
> + &bus_ce_clk.common,
> + &bus_dma_clk.common,
> + &bus_mmc0_clk.common,
> + &bus_mmc1_clk.common,
> + &bus_mmc2_clk.common,
> + &bus_mmc3_clk.common,
> + &bus_nand_clk.common,
> + &bus_dram_clk.common,
> + &bus_emac_clk.common,
> + &bus_ts_clk.common,
> + &bus_hstimer_clk.common,
> + &bus_spi0_clk.common,
> + &bus_spi1_clk.common,
> + &bus_spi2_clk.common,
> + &bus_spi3_clk.common,
> + &bus_sata_clk.common,
> + &bus_otg_clk.common,
> + &bus_ehci0_clk.common,
> + &bus_ehci1_clk.common,
> + &bus_ehci2_clk.common,
> + &bus_ohci0_clk.common,
> + &bus_ohci1_clk.common,
> + &bus_ohci2_clk.common,
> + &bus_ve_clk.common,
> + &bus_de_mp_clk.common,
> + &bus_deinterlace_clk.common,
> + &bus_csi0_clk.common,
> + &bus_csi1_clk.common,
> + &bus_hdmi_slow_clk.common,
> + &bus_hdmi_clk.common,
> + &bus_de_clk.common,
> + &bus_tve0_clk.common,
> + &bus_tve1_clk.common,
> + &bus_tve_top_clk.common,
> + &bus_gmac_clk.common,
> + &bus_gpu_clk.common,
> + &bus_tvd0_clk.common,
> + &bus_tvd1_clk.common,
> + &bus_tvd2_clk.common,
> + &bus_tvd3_clk.common,
> + &bus_tvd_top_clk.common,
> + &bus_tcon0_clk.common,
> + &bus_tcon1_clk.common,
> + &bus_tve0_tcon_clk.common,
> + &bus_tve1_tcon_clk.common,
> + &bus_tcon_top_clk.common,
> + &bus_codec_clk.common,
> + &bus_spdif_clk.common,
> + &bus_ac97_clk.common,
> + &bus_pio_clk.common,
> + &bus_ir0_clk.common,
> + &bus_ir1_clk.common,
> + &bus_ths_clk.common,
> + &bus_keypad_clk.common,
> + &bus_i2s0_clk.common,
> + &bus_i2s1_clk.common,
> + &bus_i2s2_clk.common,
> + &bus_i2c0_clk.common,
> + &bus_i2c1_clk.common,
> + &bus_i2c2_clk.common,
> + &bus_i2c3_clk.common,
> + &bus_can_clk.common,
> + &bus_scr_clk.common,
> + &bus_ps20_clk.common,
> + &bus_ps21_clk.common,
> + &bus_i2c4_clk.common,
> + &bus_uart0_clk.common,
> + &bus_uart1_clk.common,
> + &bus_uart2_clk.common,
> + &bus_uart3_clk.common,
> + &bus_uart4_clk.common,
> + &bus_uart5_clk.common,
> + &bus_uart6_clk.common,
> + &bus_uart7_clk.common,
> + &bus_dbg_clk.common,
> + &ths_clk.common,
> + &nand_clk.common,
> + &mmc0_clk.common,
> + &mmc1_clk.common,
> + &mmc2_clk.common,
> + &mmc3_clk.common,
> + &ts_clk.common,
> + &ce_clk.common,
> + &spi0_clk.common,
> + &spi1_clk.common,
> + &spi2_clk.common,
> + &spi3_clk.common,
> + &i2s0_clk.common,
> + &i2s1_clk.common,
> + &i2s2_clk.common,
> + &ac97_clk.common,
> + &spdif_clk.common,
> + &keypad_clk.common,
> + &sata_clk.common,
> + &usb_phy0_clk.common,
> + &usb_phy1_clk.common,
> + &usb_phy2_clk.common,
> + &usb_ohci0_clk.common,
> + &usb_ohci1_clk.common,
> + &usb_ohci2_clk.common,
> + &usb_ohci0_12m_clk.common,
> + &usb_ohci1_12m_clk.common,
> + &usb_ohci2_12m_clk.common,
> + &ir0_clk.common,
> + &ir1_clk.common,
> + &dram_clk.common,
> + &dram_ve_clk.common,
> + &dram_csi0_clk.common,
> + &dram_csi1_clk.common,
> + &dram_ts_clk.common,
> + &dram_tvd_clk.common,
> + &dram_de_mp_clk.common,
> + &dram_deinterlace_clk.common,
> + &de_clk.common,
> + &de_mp_clk.common,
> + &tcon0_clk.common,
> + &tcon1_clk.common,
> + &tcon_tve0_clk.common,
> + &tcon_tve1_clk.common,
> + &deinterlace_clk.common,
> + &csi1_mclk_clk.common,
> + &csi_sclk_clk.common,
> + &csi0_mclk_clk.common,
> + &ve_clk.common,
> + &adda_clk.common,
> + &adda_4x_clk.common,
> + &avs_clk.common,
> + &hdmi_clk.common,
> + &hdmi_slow_clk.common,
> + &mbus_clk.common,
> + &mipi_dsi_clk.common,
> + &tve0_clk.common,
> + &tve1_clk.common,
> + &tvd0_clk.common,
> + &tvd1_clk.common,
> + &tvd2_clk.common,
> + &tvd3_clk.common,
> + &gpu_clk.common,
> + &outa_clk.common,
> + &outb_clk.common,
> +};
> +
> +/* We hardcode the divider to 4 for now */
> +static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
> + "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
> + "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
> + "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
> + "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
> + "pll-periph0", 1, 2, 0);
> +static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
> + "pll-periph1", 1, 2, 0);
> +static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
> + "pll-video0", 1, 2, 0);
> +static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
> + "pll-video1", 1, 2, 0);
> +static CLK_FIXED_FACTOR(osc24m_2x_clk, "osc24M-2x",
> + "osc24M", 1, 2, 0);
> +static CLK_FIXED_FACTOR(osc24m_32k_clk, "osc24M-32k",
> + "osc24M", 750, 1, 0);
As mentioned above, please drop the last one.
> +
> +static struct clk_hw_onecell_data sun8i_r40_hw_clks = {
> + .hws = {
> + [CLK_OSC24M_2X] = &osc24m_2x_clk.hw,
> + [CLK_OSC24M_32K] = &osc24m_32k_clk.hw,
> + [CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
> + [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
> + [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
> + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
> + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
> + [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
> + [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
> + [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
> + [CLK_PLL_VE] = &pll_ve_clk.common.hw,
> + [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
> + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
> + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
> + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
> + [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
> + [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
> + [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
> + [CLK_PLL_SATA] = &pll_sata_clk.common.hw,
> + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
> + [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
> + [CLK_PLL_DE] = &pll_de_clk.common.hw,
> + [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
> + [CLK_CPU] = &cpu_clk.common.hw,
> + [CLK_AXI] = &axi_clk.common.hw,
> + [CLK_AHB1] = &ahb1_clk.common.hw,
> + [CLK_APB1] = &apb1_clk.common.hw,
> + [CLK_APB2] = &apb2_clk.common.hw,
> + [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
> + [CLK_BUS_CE] = &bus_ce_clk.common.hw,
> + [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
> + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
> + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
> + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
> + [CLK_BUS_MMC3] = &bus_mmc3_clk.common.hw,
> + [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
> + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
> + [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
> + [CLK_BUS_TS] = &bus_ts_clk.common.hw,
> + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
> + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
> + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
> + [CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
> + [CLK_BUS_SPI3] = &bus_spi3_clk.common.hw,
> + [CLK_BUS_SATA] = &bus_sata_clk.common.hw,
> + [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
> + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
> + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
> + [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
> + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
> + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
> + [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
> + [CLK_BUS_VE] = &bus_ve_clk.common.hw,
> + [CLK_BUS_DE_MP] = &bus_de_mp_clk.common.hw,
> + [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
> + [CLK_BUS_CSI0] = &bus_csi0_clk.common.hw,
> + [CLK_BUS_CSI1] = &bus_csi1_clk.common.hw,
> + [CLK_BUS_HDMI_SLOW] = &bus_hdmi_slow_clk.common.hw,
> + [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
> + [CLK_BUS_DE] = &bus_de_clk.common.hw,
> + [CLK_BUS_TVE0] = &bus_tve0_clk.common.hw,
> + [CLK_BUS_TVE1] = &bus_tve1_clk.common.hw,
> + [CLK_BUS_TVE_TOP] = &bus_tve_top_clk.common.hw,
> + [CLK_BUS_GMAC] = &bus_gmac_clk.common.hw,
> + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
> + [CLK_BUS_TVD0] = &bus_tvd0_clk.common.hw,
> + [CLK_BUS_TVD1] = &bus_tvd1_clk.common.hw,
> + [CLK_BUS_TVD2] = &bus_tvd2_clk.common.hw,
> + [CLK_BUS_TVD3] = &bus_tvd3_clk.common.hw,
> + [CLK_BUS_TVD_TOP] = &bus_tvd_top_clk.common.hw,
> + [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
> + [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
> + [CLK_BUS_TVE0_TCON] = &bus_tve0_tcon_clk.common.hw,
> + [CLK_BUS_TVE1_TCON] = &bus_tve1_tcon_clk.common.hw,
> + [CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
> + [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
> + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
> + [CLK_BUS_AC97] = &bus_ac97_clk.common.hw,
> + [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
> + [CLK_BUS_IR0] = &bus_ir0_clk.common.hw,
> + [CLK_BUS_IR1] = &bus_ir1_clk.common.hw,
> + [CLK_BUS_THS] = &bus_ths_clk.common.hw,
> + [CLK_BUS_KEYPAD] = &bus_keypad_clk.common.hw,
> + [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
> + [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
> + [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
> + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
> + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
> + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
> + [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
> + [CLK_BUS_CAN] = &bus_can_clk.common.hw,
> + [CLK_BUS_SCR] = &bus_scr_clk.common.hw,
> + [CLK_BUS_PS20] = &bus_ps20_clk.common.hw,
> + [CLK_BUS_PS21] = &bus_ps21_clk.common.hw,
> + [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
> + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
> + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
> + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
> + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
> + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
> + [CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
> + [CLK_BUS_UART6] = &bus_uart6_clk.common.hw,
> + [CLK_BUS_UART7] = &bus_uart7_clk.common.hw,
> + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
> + [CLK_THS] = &ths_clk.common.hw,
> + [CLK_NAND] = &nand_clk.common.hw,
> + [CLK_MMC0] = &mmc0_clk.common.hw,
> + [CLK_MMC1] = &mmc1_clk.common.hw,
> + [CLK_MMC2] = &mmc2_clk.common.hw,
> + [CLK_MMC3] = &mmc3_clk.common.hw,
> + [CLK_TS] = &ts_clk.common.hw,
> + [CLK_CE] = &ce_clk.common.hw,
> + [CLK_SPI0] = &spi0_clk.common.hw,
> + [CLK_SPI1] = &spi1_clk.common.hw,
> + [CLK_SPI2] = &spi2_clk.common.hw,
> + [CLK_SPI3] = &spi3_clk.common.hw,
> + [CLK_I2S0] = &i2s0_clk.common.hw,
> + [CLK_I2S1] = &i2s1_clk.common.hw,
> + [CLK_I2S2] = &i2s2_clk.common.hw,
> + [CLK_AC97] = &ac97_clk.common.hw,
> + [CLK_SPDIF] = &spdif_clk.common.hw,
> + [CLK_KEYPAD] = &keypad_clk.common.hw,
> + [CLK_SATA] = &sata_clk.common.hw,
> + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
> + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
> + [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
> + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
> + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
> + [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
> + [CLK_USB_OHCI0_12M] = &usb_ohci0_12m_clk.common.hw,
> + [CLK_USB_OHCI1_12M] = &usb_ohci1_12m_clk.common.hw,
> + [CLK_USB_OHCI2_12M] = &usb_ohci2_12m_clk.common.hw,
> + [CLK_IR0] = &ir0_clk.common.hw,
> + [CLK_IR1] = &ir1_clk.common.hw,
> + [CLK_DRAM] = &dram_clk.common.hw,
> + [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
> + [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
> + [CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
> + [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
> + [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
> + [CLK_DRAM_DE_MP] = &dram_de_mp_clk.common.hw,
> + [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
> + [CLK_DE] = &de_clk.common.hw,
> + [CLK_DE_MP] = &de_mp_clk.common.hw,
> + [CLK_TCON0] = &tcon0_clk.common.hw,
> + [CLK_TCON1] = &tcon1_clk.common.hw,
> + [CLK_TCON_TVE0] = &tcon_tve0_clk.common.hw,
> + [CLK_TCON_TVE1] = &tcon_tve1_clk.common.hw,
> + [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
> + [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
> + [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
> + [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
> + [CLK_VE] = &ve_clk.common.hw,
> + [CLK_ADDA] = &adda_clk.common.hw,
> + [CLK_ADDA_4X] = &adda_4x_clk.common.hw,
> + [CLK_AVS] = &avs_clk.common.hw,
> + [CLK_HDMI] = &hdmi_clk.common.hw,
> + [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
> + [CLK_MBUS] = &mbus_clk.common.hw,
> + [CLK_MIPI_DSI] = &mipi_dsi_clk.common.hw,
> + [CLK_TVE0] = &tve0_clk.common.hw,
> + [CLK_TVE1] = &tve1_clk.common.hw,
> + [CLK_TVD0] = &tvd0_clk.common.hw,
> + [CLK_TVD1] = &tvd1_clk.common.hw,
> + [CLK_TVD2] = &tvd2_clk.common.hw,
> + [CLK_TVD3] = &tvd3_clk.common.hw,
> + [CLK_GPU] = &gpu_clk.common.hw,
> + [CLK_OUTA] = &outa_clk.common.hw,
> + [CLK_OUTB] = &outb_clk.common.hw,
> + },
> + .num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun8i_r40_ccu_resets[] = {
> + [RST_USB_PHY0] = { 0x0cc, BIT(0) },
> + [RST_USB_PHY1] = { 0x0cc, BIT(1) },
> + [RST_USB_PHY2] = { 0x0cc, BIT(2) },
> +
There is also a reset control for the DRAM controller at bit 31
of register 0xf4.
> + [RST_MBUS] = { 0x0fc, BIT(31) },
> +
> + [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
> + [RST_BUS_CE] = { 0x2c0, BIT(5) },
> + [RST_BUS_DMA] = { 0x2c0, BIT(6) },
> + [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
> + [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
> + [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
> + [RST_BUS_MMC3] = { 0x2c0, BIT(11) },
> + [RST_BUS_NAND] = { 0x2c0, BIT(13) },
> + [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
> + [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
> + [RST_BUS_TS] = { 0x2c0, BIT(18) },
> + [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
> + [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
> + [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
> + [RST_BUS_SPI2] = { 0x2c0, BIT(22) },
> + [RST_BUS_SPI3] = { 0x2c0, BIT(23) },
> + [RST_BUS_SATA] = { 0x2c0, BIT(24) },
> + [RST_BUS_OTG] = { 0x2c0, BIT(25) },
> + [RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
> + [RST_BUS_EHCI1] = { 0x2c0, BIT(27) },
> + [RST_BUS_EHCI2] = { 0x2c0, BIT(28) },
> + [RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
> + [RST_BUS_OHCI1] = { 0x2c0, BIT(30) },
> + [RST_BUS_OHCI2] = { 0x2c0, BIT(31) },
> +
> + [RST_BUS_VE] = { 0x2c4, BIT(0) },
> + [RST_BUS_DE_MP] = { 0x2c4, BIT(2) },
Same thing about the MP's name.
> + [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
> + [RST_BUS_CSI0] = { 0x2c4, BIT(8) },
> + [RST_BUS_CSI1] = { 0x2c4, BIT(9) },
> + [RST_BUS_HDMI_SLOW] = { 0x2c4, BIT(10) },
> + [RST_BUS_HDMI] = { 0x2c4, BIT(11) },
Same thing about the HDMI's names.
> + [RST_BUS_DE] = { 0x2c4, BIT(12) },
> + [RST_BUS_TVE0] = { 0x2c4, BIT(13) },
> + [RST_BUS_TVE1] = { 0x2c4, BIT(14) },
> + [RST_BUS_TVE_TOP] = { 0x2c4, BIT(15) },
> + [RST_BUS_GMAC] = { 0x2c4, BIT(17) },
> + [RST_BUS_GPU] = { 0x2c4, BIT(20) },
> + [RST_BUS_TVD0] = { 0x2c4, BIT(21) },
> + [RST_BUS_TVD1] = { 0x2c4, BIT(22) },
> + [RST_BUS_TVD2] = { 0x2c4, BIT(23) },
> + [RST_BUS_TVD3] = { 0x2c4, BIT(24) },
> + [RST_BUS_TVD_TOP] = { 0x2c4, BIT(25) },
> + [RST_BUS_TCON0] = { 0x2c4, BIT(26) },
> + [RST_BUS_TCON1] = { 0x2c4, BIT(27) },
> + [RST_BUS_TCON_TVE0] = { 0x2c4, BIT(28) },
> + [RST_BUS_TCON_TVE1] = { 0x2c4, BIT(29) },
Same thing about the TCON names.
> + [RST_BUS_TCON_TOP] = { 0x2c4, BIT(30) },
> + [RST_BUS_DBG] = { 0x2c4, BIT(31) },
> +
> + [RST_BUS_LVDS] = { 0x2c8, BIT(0) },
> +
> + [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
> + [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
> + [RST_BUS_AC97] = { 0x2d0, BIT(2) },
> + [RST_BUS_IR0] = { 0x2d0, BIT(6) },
> + [RST_BUS_IR1] = { 0x2d0, BIT(7) },
> + [RST_BUS_THS] = { 0x2d0, BIT(8) },
> + [RST_BUS_KEYPAD] = { 0x2d0, BIT(10) },
> + [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
> + [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
> + [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
> +
> + [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
> + [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
> + [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
> + [RST_BUS_I2C3] = { 0x2d8, BIT(3) },
> + [RST_BUS_CAN] = { 0x2d8, BIT(4) },
Please add a note for CAN like you did with the bus gate.
> + [RST_BUS_SCR] = { 0x2d8, BIT(5) },
> + [RST_BUS_PS20] = { 0x2d8, BIT(6) },
> + [RST_BUS_PS21] = { 0x2d8, BIT(7) },
> + [RST_BUS_I2C4] = { 0x2d8, BIT(15) },
> + [RST_BUS_UART0] = { 0x2d8, BIT(16) },
> + [RST_BUS_UART1] = { 0x2d8, BIT(17) },
> + [RST_BUS_UART2] = { 0x2d8, BIT(18) },
> + [RST_BUS_UART3] = { 0x2d8, BIT(19) },
> + [RST_BUS_UART4] = { 0x2d8, BIT(20) },
> + [RST_BUS_UART5] = { 0x2d8, BIT(21) },
> + [RST_BUS_UART6] = { 0x2d8, BIT(22) },
> + [RST_BUS_UART7] = { 0x2d8, BIT(23) },
> +};
> +
> +static const struct sunxi_ccu_desc sun8i_r40_ccu_desc = {
> + .ccu_clks = sun8i_r40_ccu_clks,
> + .num_ccu_clks = ARRAY_SIZE(sun8i_r40_ccu_clks),
> +
> + .hw_clks = &sun8i_r40_hw_clks,
> +
> + .resets = sun8i_r40_ccu_resets,
> + .num_resets = ARRAY_SIZE(sun8i_r40_ccu_resets),
> +};
> +
> +static struct ccu_mux_nb sun8i_r40_cpu_nb = {
> + .common = &cpu_clk.common,
> + .cm = &cpu_clk.mux,
> + .delay_us = 1, /* > 8 clock cycles at 24 MHz */
> + .bypass_index = 1, /* index of 24 MHz oscillator */
> +};
> +
> +static void __init sun8i_r40_ccu_setup(struct device_node *node)
> +{
> + void __iomem *reg;
> + u32 val;
> +
> + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> + if (IS_ERR(reg)) {
> + pr_err("%s: Could not map the clock registers\n",
> + of_node_full_name(node));
> + return;
> + }
> +
> + /* Force the PLL-Audio-1x divider to 4 */
> + val = readl(reg + SUN8I_R40_PLL_AUDIO_REG);
> + val &= ~GENMASK(19, 16);
> + writel(val | (3 << 16), reg + SUN8I_R40_PLL_AUDIO_REG);
> +
> + sunxi_ccu_probe(node, reg, &sun8i_r40_ccu_desc);
> +
> + ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
> + &sun8i_r40_cpu_nb);
> +}
> +CLK_OF_DECLARE(sun8i_r40_ccu, "allwinner,sun8i-r40-ccu",
> + sun8i_r40_ccu_setup);
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.h b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
> new file mode 100644
> index 000000000000..be30eb662d78
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
> @@ -0,0 +1,68 @@
> +/*
> + * Copyright 2017 Icenowy Zheng <icenowy@...c.io>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _CCU_SUN8I_R40_H_
> +#define _CCU_SUN8I_R40_H_
> +
> +#include <dt-bindings/clock/sun8i-r40-ccu.h>
> +#include <dt-bindings/reset/sun8i-r40-ccu.h>
> +
> +#define CLK_OSC24M_2X 0
As mentioned, please drop this one.
> +#define CLK_OSC24M_32K 1
> +#define CLK_PLL_CPU 2
> +#define CLK_PLL_AUDIO_BASE 3
> +#define CLK_PLL_AUDIO 4
> +#define CLK_PLL_AUDIO_2X 5
> +#define CLK_PLL_AUDIO_4X 6
> +#define CLK_PLL_AUDIO_8X 7
> +#define CLK_PLL_VIDEO0 8
> +#define CLK_PLL_VIDEO0_2X 9
> +#define CLK_PLL_VE 10
> +#define CLK_PLL_DDR0 11
> +#define CLK_PLL_PERIPH0 12
> +#define CLK_PLL_PERIPH0_2X 13
> +#define CLK_PLL_PERIPH1 14
> +#define CLK_PLL_PERIPH1_2X 15
> +#define CLK_PLL_VIDEO1 16
> +#define CLK_PLL_VIDEO1_2X 17
> +#define CLK_PLL_SATA 18
> +#define CLK_PLL_GPU 19
> +#define CLK_PLL_MIPI 20
> +#define CLK_PLL_DE 21
> +#define CLK_PLL_DDR1 22
> +
> +/* The CPU clock is exported */
> +
> +#define CLK_AXI 24
> +#define CLK_AHB1 25
> +#define CLK_APB1 26
> +#define CLK_APB2 27
> +
> +/* All the bus gates are exported */
> +
> +/* The first bunch of module clocks are exported */
> +
> +#define CLK_DRAM 134
> +
> +/* All the DRAM gates are exported */
> +
> +/* Some more module clocks are exported */
> +
> +#define CLK_MBUS 158
> +
> +/* Another bunch of module clocks are exported */
> +
> +#define CLK_NUMBER (CLK_OUTB + 1)
> +
> +#endif /* _CCU_SUN8I_R40_H_ */
> diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h
> new file mode 100644
> index 000000000000..a907d841496d
> --- /dev/null
> +++ b/include/dt-bindings/clock/sun8i-r40-ccu.h
> @@ -0,0 +1,191 @@
> +/*
> + * Copyright (C) 2017 Icenowy Zheng <icenowy@...c.io>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_
> +#define _DT_BINDINGS_CLK_SUN8I_R40_H_
> +
> +#define CLK_CPU 23
> +
> +#define CLK_BUS_MIPI_DSI 28
> +#define CLK_BUS_CE 29
> +#define CLK_BUS_DMA 30
> +#define CLK_BUS_MMC0 31
> +#define CLK_BUS_MMC1 32
> +#define CLK_BUS_MMC2 33
> +#define CLK_BUS_MMC3 34
> +#define CLK_BUS_NAND 35
> +#define CLK_BUS_DRAM 36
> +#define CLK_BUS_EMAC 37
> +#define CLK_BUS_TS 38
> +#define CLK_BUS_HSTIMER 39
> +#define CLK_BUS_SPI0 40
> +#define CLK_BUS_SPI1 41
> +#define CLK_BUS_SPI2 42
> +#define CLK_BUS_SPI3 43
> +#define CLK_BUS_SATA 44
> +#define CLK_BUS_OTG 45
> +#define CLK_BUS_EHCI0 46
> +#define CLK_BUS_EHCI1 47
> +#define CLK_BUS_EHCI2 48
> +#define CLK_BUS_OHCI0 49
> +#define CLK_BUS_OHCI1 50
> +#define CLK_BUS_OHCI2 51
> +#define CLK_BUS_VE 52
> +#define CLK_BUS_DE_MP 53
MP name...
> +#define CLK_BUS_DEINTERLACE 54
> +#define CLK_BUS_CSI0 55
> +#define CLK_BUS_CSI1 56
> +#define CLK_BUS_HDMI_SLOW 57
> +#define CLK_BUS_HDMI 58
Names...
> +#define CLK_BUS_DE 59
> +#define CLK_BUS_TVE0 60
> +#define CLK_BUS_TVE1 61
> +#define CLK_BUS_TVE_TOP 62
> +#define CLK_BUS_GMAC 63
> +#define CLK_BUS_GPU 64
> +#define CLK_BUS_TVD0 65
> +#define CLK_BUS_TVD1 66
> +#define CLK_BUS_TVD2 67
> +#define CLK_BUS_TVD3 68
> +#define CLK_BUS_TVD_TOP 69
> +#define CLK_BUS_TCON0 70
> +#define CLK_BUS_TCON1 71
> +#define CLK_BUS_TVE0_TCON 72
> +#define CLK_BUS_TVE1_TCON 73
Names...
> +#define CLK_BUS_TCON_TOP 74
> +#define CLK_BUS_CODEC 75
> +#define CLK_BUS_SPDIF 76
> +#define CLK_BUS_AC97 77
> +#define CLK_BUS_PIO 78
> +#define CLK_BUS_IR0 79
> +#define CLK_BUS_IR1 80
> +#define CLK_BUS_THS 81
> +#define CLK_BUS_KEYPAD 82
> +#define CLK_BUS_I2S0 83
> +#define CLK_BUS_I2S1 84
> +#define CLK_BUS_I2S2 85
> +#define CLK_BUS_I2C0 86
> +#define CLK_BUS_I2C1 87
> +#define CLK_BUS_I2C2 88
> +#define CLK_BUS_I2C3 89
> +#define CLK_BUS_CAN 90
> +#define CLK_BUS_SCR 91
> +#define CLK_BUS_PS20 92
> +#define CLK_BUS_PS21 93
> +#define CLK_BUS_I2C4 94
> +#define CLK_BUS_UART0 95
> +#define CLK_BUS_UART1 96
> +#define CLK_BUS_UART2 97
> +#define CLK_BUS_UART3 98
> +#define CLK_BUS_UART4 99
> +#define CLK_BUS_UART5 100
> +#define CLK_BUS_UART6 101
> +#define CLK_BUS_UART7 102
> +#define CLK_BUS_DBG 103
> +
> +#define CLK_THS 104
> +#define CLK_NAND 105
> +#define CLK_MMC0 106
> +#define CLK_MMC1 107
> +#define CLK_MMC2 108
> +#define CLK_MMC3 109
> +#define CLK_TS 110
> +#define CLK_CE 111
> +#define CLK_SPI0 112
> +#define CLK_SPI1 113
> +#define CLK_SPI2 114
> +#define CLK_SPI3 115
> +#define CLK_I2S0 116
> +#define CLK_I2S1 117
> +#define CLK_I2S2 118
> +#define CLK_AC97 119
> +#define CLK_SPDIF 120
> +#define CLK_KEYPAD 121
> +#define CLK_SATA 122
> +#define CLK_USB_PHY0 123
> +#define CLK_USB_PHY1 124
> +#define CLK_USB_PHY2 125
> +#define CLK_USB_OHCI0 126
> +#define CLK_USB_OHCI1 127
> +#define CLK_USB_OHCI2 128
> +#define CLK_USB_OHCI0_12M 129
> +#define CLK_USB_OHCI1_12M 130
> +#define CLK_USB_OHCI2_12M 131
These 3 should not be exported.
> +#define CLK_IR0 132
> +#define CLK_IR1 133
> +
> +#define CLK_DRAM_VE 135
> +#define CLK_DRAM_CSI0 136
> +#define CLK_DRAM_CSI1 137
> +#define CLK_DRAM_TS 138
> +#define CLK_DRAM_TVD 139
> +#define CLK_DRAM_DE_MP 140
MP name...
> +#define CLK_DRAM_DEINTERLACE 141
> +#define CLK_DE 142
> +#define CLK_DE_MP 143
MP name...
> +#define CLK_TCON0 144
> +#define CLK_TCON1 145
> +#define CLK_TCON_TVE0 146
> +#define CLK_TCON_TVE1 147
Names...
> +#define CLK_DEINTERLACE 148
> +#define CLK_CSI1_MCLK 149
> +#define CLK_CSI_SCLK 150
> +#define CLK_CSI0_MCLK 151
> +#define CLK_VE 152
> +#define CLK_ADDA 153
> +#define CLK_ADDA_4X 154
Nonexistent.
> +#define CLK_AVS 155
> +#define CLK_HDMI 156
> +#define CLK_HDMI_SLOW 157
> +
> +#define CLK_MIPI_DSI 159
> +#define CLK_TVE0 160
> +#define CLK_TVE1 161
> +#define CLK_TVD0 162
> +#define CLK_TVD1 163
> +#define CLK_TVD2 164
> +#define CLK_TVD3 165
> +#define CLK_GPU 166
> +#define CLK_OUTA 167
> +#define CLK_OUTB 168
> +
> +#endif /* _DT_BINDINGS_CLK_SUN8I_R40_H_ */
> diff --git a/include/dt-bindings/reset/sun8i-r40-ccu.h b/include/dt-bindings/reset/sun8i-r40-ccu.h
> new file mode 100644
> index 000000000000..a7001f34b0b9
> --- /dev/null
> +++ b/include/dt-bindings/reset/sun8i-r40-ccu.h
Name corrections apply to this file as well.
Regards
ChenYu
> --
> 2.12.2
>
Powered by blists - more mailing lists