[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1496135297-19680-1-git-send-email-srinath.mannam@broadcom.com>
Date: Tue, 30 May 2017 14:38:17 +0530
From: Srinath Mannam <srinath.mannam@...adcom.com>
To: bhelgaas@...gle.com
Cc: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
Srinath Mannam <srinath.mannam@...adcom.com>
Subject: [RFC PATCH v2] pci: Concurrency issue in NVMe Init through PCIe switch
We found a concurrency issue in NVMe Init when we initialize
multiple NVMe connected over PCIe switch.
Setup details:
- SMP system with 8 ARMv8 cores running Linux kernel(4.11).
- Two NVMe cards are connected to PCIe RC through bridge as shown
in the below figure.
[RC]
|
[BRIDGE]
|
-----------
| |
[NVMe] [NVMe]
Issue description:
After PCIe enumeration completed NVMe driver probe function called
for both the devices from two CPUS simultaneously.
>From nvme_probe, pci_enable_device_mem called for both the EPs. This
function called pci_enable_bridge enable recursively until RC.
Inside pci_enable_bridge function, at two places concurrency issue is
observed.
Place 1:
CPU 0:
1. Done Atomic increment dev->enable_cnt
in pci_enable_device_flags
2. Inside pci_enable_resources
3. Completed pci_read_config_word(dev, PCI_COMMAND, &cmd)
4. Ready to set PCI_COMMAND_MEMORY (0x2) in
pci_write_config_word(dev, PCI_COMMAND, cmd)
CPU 1:
1. Check pci_is_enabled in function pci_enable_bridge
and it is true
2. Check (!dev->is_busmaster) also true
3. Gone into pci_set_master
4. Completed pci_read_config_word(dev, PCI_COMMAND, &old_cmd)
5. Ready to set PCI_COMMAND_MASTER (0x4) in
pci_write_config_word(dev, PCI_COMMAND, cmd)
By the time of last point for both the CPUs are read value 0 and
ready to write 2 and 4.
After last point final value in PCI_COMMAND register is 4 instead of 6.
Place 2:
CPU 0:
1. Done Atomic increment dev->enable_cnt in
pci_enable_device_flags
Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
---
Changes since v1:
- Used mutex to syncronize pci_enable_bridge
drivers/pci/pci.c | 4 ++++
drivers/pci/probe.c | 1 +
include/linux/pci.h | 1 +
3 files changed, 6 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b01bd5b..5bff3e7 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1347,7 +1347,9 @@ static void pci_enable_bridge(struct pci_dev *dev)
{
struct pci_dev *bridge;
int retval;
+ struct mutex *lock = &dev->bridge_lock;
+ mutex_lock(lock);
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_enable_bridge(bridge);
@@ -1355,6 +1357,7 @@ static void pci_enable_bridge(struct pci_dev *dev)
if (pci_is_enabled(dev)) {
if (!dev->is_busmaster)
pci_set_master(dev);
+ mutex_unlock(lock);
return;
}
@@ -1363,6 +1366,7 @@ static void pci_enable_bridge(struct pci_dev *dev)
dev_err(&dev->dev, "Error enabling bridge (%d), continuing\n",
retval);
pci_set_master(dev);
+ mutex_unlock(lock);
}
static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 19c8950..1c25d1c 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -880,6 +880,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
child->dev.parent = child->bridge;
pci_set_bus_of_node(child);
pci_set_bus_speed(child);
+ mutex_init(&bridge->bridge_lock);
/* Set up default resource pointers and names.. */
for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 33c2b0b..7e88f41 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -266,6 +266,7 @@ struct pci_dev {
void *sysdata; /* hook for sys-specific extension */
struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */
struct pci_slot *slot; /* Physical slot this device is in */
+ struct mutex bridge_lock;
unsigned int devfn; /* encoded device & function index */
unsigned short vendor;
--
2.7.4
Powered by blists - more mailing lists