[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170531094003.21997-1-michael.thalmeier@hale.at>
Date: Wed, 31 May 2017 11:40:03 +0200
From: Michael Thalmeier <michael.thalmeier@...e.at>
To: Wolfram Sang <wsa@...-dreams.de>
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
Marek Vasut <marex@...x.de>
Subject: [PATCH] i2c: mxs: change error printing to debug for mxs_i2c_pio_wait_xfer_end
Instead of printing errors after mxs_i2c_pio_wait_xfer_end returns with
an error code just print a debug message.
NAKs and timeouts can occur in this situation normally, so do not treat
them as errors.
Signed-off-by: Michael Thalmeier <michael.thalmeier@...e.at>
---
drivers/i2c/busses/i2c-mxs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 5738556..d4e8f19 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -419,7 +419,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
ret = mxs_i2c_pio_wait_xfer_end(i2c);
if (ret) {
- dev_err(i2c->dev,
+ dev_dbg(i2c->dev,
"PIO: Failed to send SELECT command!\n");
goto cleanup;
}
@@ -431,7 +431,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
ret = mxs_i2c_pio_wait_xfer_end(i2c);
if (ret) {
- dev_err(i2c->dev,
+ dev_dbg(i2c->dev,
"PIO: Failed to send READ command!\n");
goto cleanup;
}
@@ -528,7 +528,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
/* Wait for the end of the transfer. */
ret = mxs_i2c_pio_wait_xfer_end(i2c);
if (ret) {
- dev_err(i2c->dev,
+ dev_dbg(i2c->dev,
"PIO: Failed to finish WRITE cmd!\n");
break;
}
--
2.9.2
Powered by blists - more mailing lists