[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1496241195-217678-23-git-send-email-john.garry@huawei.com>
Date: Wed, 31 May 2017 22:33:14 +0800
From: John Garry <john.garry@...wei.com>
To: <jejb@...ux.vnet.ibm.com>, <martin.petersen@...cle.com>
CC: <john.garry2@...l.dcu.ie>, <linuxarm@...wei.com>,
<linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<arnd@...db.de>, Xiang Chen <chenxiang66@...ilicon.com>,
John Garry <john.garry@...wei.com>
Subject: [PATCH v3 22/23] scsi: hisi_sas: add v3 code to fill some more hw function pointers
From: Xiang Chen <chenxiang66@...ilicon.com>
Add code to fill the interface of phy_hard_reset, phy_get_max_linkrate,
and phy enable/disable.
Signed-off-by: John Garry <john.garry@...wei.com>
Signed-off-by: Xiang Chen <chenxiang66@...ilicon.com>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 40 +++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 3203221..17f9ac9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -195,6 +195,8 @@
#define TXID_AUTO (PORT_BASE + 0xb8)
#define CT3_OFF 1
#define CT3_MSK (0x1 << CT3_OFF)
+#define TX_HARDRST_OFF 2
+#define TX_HARDRST_MSK (0x1 << TX_HARDRST_OFF)
#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
#define SAS_SSP_CON_TIMER_CFG (PORT_BASE + 0x134)
@@ -648,6 +650,14 @@ static void enable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
}
+static void disable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
static void start_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
{
config_id_frame_v3_hw(hisi_hba, phy_no);
@@ -655,6 +665,11 @@ static void start_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
enable_phy_v3_hw(hisi_hba, phy_no);
}
+static void stop_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ disable_phy_v3_hw(hisi_hba, phy_no);
+}
+
static void start_phys_v3_hw(struct hisi_hba *hisi_hba)
{
int i;
@@ -663,6 +678,26 @@ static void start_phys_v3_hw(struct hisi_hba *hisi_hba)
start_phy_v3_hw(hisi_hba, i);
}
+static void phy_hard_reset_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ u32 txid_auto;
+
+ stop_phy_v3_hw(hisi_hba, phy_no);
+ if (phy->identify.device_type == SAS_END_DEVICE) {
+ txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
+ txid_auto | TX_HARDRST_MSK);
+ }
+ msleep(100);
+ start_phy_v3_hw(hisi_hba, phy_no);
+}
+
+enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
+{
+ return SAS_LINK_RATE_12_0_GBPS;
+}
+
static void phys_init_v3_hw(struct hisi_hba *hisi_hba)
{
start_phys_v3_hw(hisi_hba);
@@ -1977,6 +2012,10 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
.start_delivery = start_delivery_v3_hw,
.slot_complete = slot_complete_v3_hw,
.phys_init = phys_init_v3_hw,
+ .phy_enable = enable_phy_v3_hw,
+ .phy_disable = disable_phy_v3_hw,
+ .phy_hard_reset = phy_hard_reset_v3_hw,
+ .phy_get_max_linkrate = phy_get_max_linkrate_v3_hw,
};
static struct Scsi_Host *
@@ -2141,7 +2180,6 @@ static void hisi_sas_v3_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
}
-
enum {
/* instances of the controller */
hip08,
--
1.9.1
Powered by blists - more mailing lists