[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <e12e9b027462646e16cb51783d6e14660a019ba6.1496239589.git-series.gregory.clement@free-electrons.com>
Date: Wed, 31 May 2017 16:07:28 +0200
From: Gregory CLEMENT <gregory.clement@...e-electrons.com>
To: Stephen Boyd <sboyd@...eaurora.org>,
Mike Turquette <mturquette@...libre.com>,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Jason Cooper <jason@...edaemon.net>, Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Gregory CLEMENT <gregory.clement@...e-electrons.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
Nadav Haklai <nadavh@...vell.com>,
Kostya Porotchkin <kostap@...vell.com>,
Neta Zur Hershkovits <neta@...vell.com>,
Marcin Wojtas <mw@...ihalf.com>,
Omri Itach <omrii@...vell.com>,
Shadi Ammouri <shadi@...vell.com>
Subject: [PATCH v2 7/7] arm64: dts: marvell: use new binding for the system controller on ap806
The new binding for the system controller on ap806 moved the clock into a
subnode. This preliminary step will allow to add gpio and pinctrl
subnodes
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>
---
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 0c25ec62a2a3..205037e3e7dc 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -193,7 +193,7 @@
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
@@ -204,7 +204,7 @@
#size-cells = <0>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
@@ -214,7 +214,7 @@
reg-shift = <2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
@@ -224,7 +224,7 @@
reg-shift = <2>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
- clocks = <&ap_syscon 3>;
+ clocks = <&ap_clk 3>;
status = "disabled";
};
@@ -234,17 +234,20 @@
reg = <0x6e0000 0x300>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core";
- clocks = <&ap_syscon 4>;
+ clocks = <&ap_clk 4>;
dma-coherent;
marvell,xenon-phy-slow-mode;
status = "disabled";
};
ap_syscon: system-controller@...000 {
- compatible = "marvell,ap806-system-controller",
- "syscon";
- #clock-cells = <1>;
+ compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x1000>;
+
+ ap_clk: clock {
+ compatible = "marvell,ap806-clock";
+ #clock-cells = <1>;
+ };
};
};
};
--
git-series 0.9.1
Powered by blists - more mailing lists