| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170531175230.16529-4-robin.murphy@arm.com>
Date: Wed, 31 May 2017 18:52:30 +0100
From: Robin Murphy <robin.murphy@....com>
To: lorenzo.pieralisi@....com, hanjun.guo@...aro.org,
sudeep.holla@....com
Cc: rjw@...ysocki.net, lenb@...nel.org, linux-acpi@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] ACPI/IORT: Handle PCI aliases properly
When a PCI device has DMA quirks, we need to ensure that an upstream
IOMMU knows about all possible aliases, since the presence of a DMA
quirk does not preclude the device still also emitting transactions
(e.g. MSIs) on its 'real' RID. Similarly, the rules for bridge aliasing
are relatively complex, and some bridges may only take ownership of
transactions under particular transient circumstances, leading again to
multiple RIDs potentially being seen at the IOMMU for the given device.
Take all this into account in the IORT code by mapping every RID
produced by the alias walk, not just whichever one comes out last. Since
adding any more internal PTR_ERR() juggling would have confused me no
end, a bit of refactoring happens in the process - we know where to find
the ops if everything succeeded, so we're free to just pass regular error
codes around up until then.
Signed-off-by: Robin Murphy <robin.murphy@....com>
---
This applies on top of the fixes currently queued in the IOMMU tree:
"ACPI/IORT: Move the check to get iommu_ops from translated fwspec"
"ACPI/IORT: Ignore all errors except EPROBE_DEFER"
drivers/acpi/arm64/iort.c | 113 ++++++++++++++++++++++++----------------------
1 file changed, 59 insertions(+), 54 deletions(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 797b28dc7b34..50e2749eafdc 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -598,14 +598,6 @@ void acpi_configure_pmsi_domain(struct device *dev)
dev_set_msi_domain(dev, msi_domain);
}
-static int __get_pci_rid(struct pci_dev *pdev, u16 alias, void *data)
-{
- u32 *rid = data;
-
- *rid = alias;
- return 0;
-}
-
static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
struct fwnode_handle *fwnode,
const struct iommu_ops *ops)
@@ -643,8 +635,7 @@ int iort_add_device_replay(const struct iommu_ops *ops, struct device *dev)
{
int err = 0;
- if (!IS_ERR_OR_NULL(ops) && ops->add_device && dev->bus &&
- !dev->iommu_group)
+ if (ops->add_device && dev->bus && !dev->iommu_group)
err = ops->add_device(dev);
return err;
@@ -658,36 +649,49 @@ int iort_add_device_replay(const struct iommu_ops *ops, struct device *dev)
{ return 0; }
#endif
-static const struct iommu_ops *iort_iommu_xlate(struct device *dev,
- struct acpi_iort_node *node,
- u32 streamid)
+static int iort_iommu_xlate(struct device *dev, struct acpi_iort_node *node,
+ u32 streamid)
{
- const struct iommu_ops *ops = NULL;
- int ret = -ENODEV;
+ const struct iommu_ops *ops;
struct fwnode_handle *iort_fwnode;
- if (node) {
- iort_fwnode = iort_get_fwnode(node);
- if (!iort_fwnode)
- return NULL;
+ if (!node)
+ return -ENODEV;
- ops = iommu_ops_from_fwnode(iort_fwnode);
- /*
- * If the ops look-up fails, this means that either
- * the SMMU drivers have not been probed yet or that
- * the SMMU drivers are not built in the kernel;
- * Depending on whether the SMMU drivers are built-in
- * in the kernel or not, defer the IOMMU configuration
- * or just abort it.
- */
- if (!ops)
- return iort_iommu_driver_enabled(node->type) ?
- ERR_PTR(-EPROBE_DEFER) : NULL;
+ iort_fwnode = iort_get_fwnode(node);
+ if (!iort_fwnode)
+ return -ENODEV;
- ret = arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
- }
+ ops = iommu_ops_from_fwnode(iort_fwnode);
+ /*
+ * If the ops look-up fails, this means that either
+ * the SMMU drivers have not been probed yet or that
+ * the SMMU drivers are not built in the kernel;
+ * Depending on whether the SMMU drivers are built-in
+ * in the kernel or not, defer the IOMMU configuration
+ * or just abort it.
+ */
+ if (!ops)
+ return iort_iommu_driver_enabled(node->type) ?
+ -EPROBE_DEFER : -ENODEV;
- return ret ? NULL : ops;
+ return arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
+}
+
+struct iort_pci_alias_info {
+ struct device *dev;
+ struct acpi_iort_node *node;
+};
+
+static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
+{
+ struct iort_pci_alias_info *info = data;
+ struct acpi_iort_node *parent;
+ u32 streamid;
+
+ parent = iort_node_map_id(info->node, alias, &streamid,
+ IORT_IOMMU_TYPE);
+ return iort_iommu_xlate(info->dev, parent, streamid);
}
/**
@@ -723,7 +727,7 @@ void iort_set_dma_mask(struct device *dev)
const struct iommu_ops *iort_iommu_configure(struct device *dev)
{
struct acpi_iort_node *node, *parent;
- const struct iommu_ops *ops = NULL;
+ const struct iommu_ops *ops;
u32 streamid = 0;
int err;
@@ -737,21 +741,18 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
if (dev_is_pci(dev)) {
struct pci_bus *bus = to_pci_dev(dev)->bus;
- u32 rid;
-
- pci_for_each_dma_alias(to_pci_dev(dev), __get_pci_rid,
- &rid);
+ struct iort_pci_alias_info info = { .dev = dev };
node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
iort_match_node_callback, &bus->dev);
if (!node)
return NULL;
- parent = iort_node_map_id(node, rid, &streamid,
- IORT_IOMMU_TYPE);
-
- ops = iort_iommu_xlate(dev, parent, streamid);
-
+ info.node = node;
+ err = pci_for_each_dma_alias(to_pci_dev(dev),
+ iort_pci_iommu_init, &info);
+ if (err)
+ goto out_err;
} else {
int i = 0;
@@ -764,9 +765,9 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
IORT_IOMMU_TYPE, i++);
while (parent) {
- ops = iort_iommu_xlate(dev, parent, streamid);
- if (IS_ERR_OR_NULL(ops))
- return ops;
+ err = iort_iommu_xlate(dev, parent, streamid);
+ if (err)
+ goto out_err;
parent = iort_node_map_platform_id(node, &streamid,
IORT_IOMMU_TYPE,
@@ -774,21 +775,25 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
}
}
+ ops = dev->iommu_fwspec->ops;
+
/*
* If we have reason to believe the IOMMU driver missed the initial
* add_device callback for dev, replay it to get things in order.
*/
err = iort_add_device_replay(ops, dev);
if (err)
- ops = ERR_PTR(err);
-
- /* Ignore all other errors apart from EPROBE_DEFER */
- if (IS_ERR(ops) && (PTR_ERR(ops) != -EPROBE_DEFER)) {
- dev_dbg(dev, "Adding to IOMMU failed: %ld\n", PTR_ERR(ops));
- ops = NULL;
- }
+ goto out_err;
return ops;
+
+ /* Ignore all other errors apart from EPROBE_DEFER */
+out_err:
+ if (err == -EPROBE_DEFER)
+ return ERR_PTR(err);
+
+ dev_dbg(dev, "Adding to IOMMU failed: %d\n", err);
+ return NULL;
}
static void __init acpi_iort_register_irq(int hwirq, const char *name,
--
2.12.2.dirty
Powered by blists - more mailing lists