[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170602085117.27474-6-guodong.xu@linaro.org>
Date: Fri, 2 Jun 2017 16:51:16 +0800
From: Guodong Xu <guodong.xu@...aro.org>
To: lee.jones@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
xuwei5@...ilicon.com, catalin.marinas@....com, will.deacon@....com,
lgirdwood@...il.com, broonie@...nel.org, khilman@...libre.com,
arnd@...db.de, gregory.clement@...e-electrons.com,
horms+renesas@...ge.net.au, olof@...om.net,
thomas.petazzoni@...e-electrons.com, yamada.masahiro@...ionext.com,
riku.voipio@...aro.org, treding@...dia.com, krzk@...nel.org,
eric@...olt.net, damm+renesas@...nsource.se,
ard.biesheuvel@...aro.org, linus.walleij@...aro.org,
geert+renesas@...der.be
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, hw.wangxiaoyin@...ilicon.com,
Guodong Xu <guodong.xu@...aro.org>
Subject: [PATCH v2 5/6] arm64: dts: hikey960: add device node for pmic and regulators
From: Wang Xiaoyin <hw.wangxiaoyin@...ilicon.com>
add device node for hi6421 pmic core and hi6421v530
voltage regulator,include LDO(1,3,9,11,15,16)
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@...ilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 46 +++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index ca448f0..9da8375 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -97,6 +97,52 @@
default-state = "off";
};
};
+
+ pmic: pmic@...34000 {
+ compatible = "hisilicon,hi6421v530-pmic";
+ reg = <0x0 0xfff34000 0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ ldo3: LDO3 { /* HDMI */
+ regulator-name = "VOUT3_1V85";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo9: LDO9 { /* SDCARD I/O */
+ regulator-name = "VOUT9_1V8/2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo11: LDO11 { /* Low Speed Connector */
+ regulator-name = "VOUT11_1V8/2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo15: LDO15 { /* UFS VCC */
+ regulator-name = "VOUT15_3V0";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo16: LDO16 { /* SD VDD */
+ regulator-name = "VOUT16_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+ };
+ };
};
&i2c0 {
--
2.10.2
Powered by blists - more mailing lists